mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 13:33:40 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
279 lines
6.6 KiB
ArmAsm
279 lines
6.6 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2015-2016 Wills Wang <wills.wang@live.com>
|
|
* Based on Atheros LSDK/QSDK and u-boot_mod project
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <asm/asm.h>
|
|
#include <asm/regdef.h>
|
|
#include <asm/mipsregs.h>
|
|
#include <asm/addrspace.h>
|
|
#include <mach/ar71xx_regs.h>
|
|
|
|
#define SET_BIT(val, bit) ((val) | (1 << (bit)))
|
|
#define SET_PLL_PD(val) SET_BIT(val, 30)
|
|
#define AHB_DIV_TO_4(val) SET_BIT(SET_BIT(val, 15), 16)
|
|
#define PLL_BYPASS(val) SET_BIT(val, 2)
|
|
|
|
#define MK_PLL_CONF(divint, refdiv, range, outdiv) \
|
|
(((0x3F & divint) << 10) | \
|
|
((0x1F & refdiv) << 16) | \
|
|
((0x1 & range) << 21) | \
|
|
((0x7 & outdiv) << 23) )
|
|
|
|
#define MK_CLK_CNTL(cpudiv, ddrdiv, ahbdiv) \
|
|
(((0x3 & (cpudiv - 1)) << 5) | \
|
|
((0x3 & (ddrdiv - 1)) << 10) | \
|
|
((0x3 & (ahbdiv - 1)) << 15) )
|
|
|
|
/*
|
|
* PLL_CPU_CONFIG_VAL
|
|
*
|
|
* Bit30 is set (CPU_PLLPWD = 1 -> power down control for CPU PLL)
|
|
* After PLL configuration we need to clear this bit
|
|
*
|
|
* Values written into CPU PLL Configuration (CPU_PLL_CONFIG)
|
|
*
|
|
* bits 10..15 (6bit) DIV_INT (Integer part of the DIV to CPU PLL)
|
|
* => 32 (0x20) VCOOUT = XTAL * DIV_INT
|
|
* bits 16..20 (5bit) REFDIV (Reference clock divider)
|
|
* => 1 (0x1) [Must start at values 1]
|
|
* bits 21 (1bit) RANGE (VCO frequency range of the CPU PLL)
|
|
* => 0 (0x0) [Doesn't impact clock values]
|
|
* bits 23..25 (3bit) OUTDIV (Ratio between VCO and PLL output)
|
|
* => 1 (0x1) [0 is illegal!]
|
|
* PLLOUT = VCOOUT * (1/2^OUTDIV)
|
|
*/
|
|
/* DIV_INT=32 (25MHz*32/2=400MHz), REFDIV=1, RANGE=0, OUTDIV=1 */
|
|
#define PLL_CPU_CONFIG_VAL_40M MK_PLL_CONF(20, 1, 0, 1)
|
|
/* DIV_INT=20 (40MHz*20/2=400MHz), REFDIV=1, RANGE=0, OUTDIV=1 */
|
|
#define PLL_CPU_CONFIG_VAL_25M MK_PLL_CONF(32, 1, 0, 1)
|
|
|
|
/*
|
|
* PLL_CLK_CONTROL_VAL
|
|
*
|
|
* In PLL_CLK_CONTROL_VAL bit 2 is set (BYPASS = 1 -> bypass PLL)
|
|
* After PLL configuration we need to clear this bit
|
|
*
|
|
* Values written into CPU Clock Control Register CLOCK_CONTROL
|
|
*
|
|
* bits 2 (1bit) BYPASS (Bypass PLL. This defaults to 1 for test.
|
|
* Software must enable the CPU PLL for normal and
|
|
* then set this bit to 0)
|
|
* bits 5..6 (2bit) CPU_POST_DIV => 0 (DEFAULT, Ratio = 1)
|
|
* CPU_CLK = PLLOUT / CPU_POST_DIV
|
|
* bits 10..11 (2bit) DDR_POST_DIV => 0 (DEFAULT, Ratio = 1)
|
|
* DDR_CLK = PLLOUT / DDR_POST_DIV
|
|
* bits 15..16 (2bit) AHB_POST_DIV => 1 (DEFAULT, Ratio = 2)
|
|
* AHB_CLK = PLLOUT / AHB_POST_DIV
|
|
*
|
|
*/
|
|
#define PLL_CLK_CONTROL_VAL MK_CLK_CNTL(1, 1, 2)
|
|
|
|
.text
|
|
.set noreorder
|
|
|
|
LEAF(lowlevel_init)
|
|
/* These three WLAN_RESET will avoid original issue */
|
|
li t3, 0x03
|
|
1:
|
|
li t0, CKSEG1ADDR(AR71XX_RESET_BASE)
|
|
lw t1, AR933X_RESET_REG_RESET_MODULE(t0)
|
|
ori t1, t1, 0x0800
|
|
sw t1, AR933X_RESET_REG_RESET_MODULE(t0)
|
|
nop
|
|
lw t1, AR933X_RESET_REG_RESET_MODULE(t0)
|
|
li t2, 0xfffff7ff
|
|
and t1, t1, t2
|
|
sw t1, AR933X_RESET_REG_RESET_MODULE(t0)
|
|
nop
|
|
addi t3, t3, -1
|
|
bnez t3, 1b
|
|
nop
|
|
|
|
li t2, 0x20
|
|
2:
|
|
beqz t2, 1b
|
|
nop
|
|
addi t2, t2, -1
|
|
lw t5, AR933X_RESET_REG_BOOTSTRAP(t0)
|
|
andi t1, t5, 0x10
|
|
bnez t1, 2b
|
|
nop
|
|
|
|
li t1, 0x02110E
|
|
sw t1, AR933X_RESET_REG_BOOTSTRAP(t0)
|
|
nop
|
|
|
|
/* RTC Force Wake */
|
|
li t0, CKSEG1ADDR(AR933X_RTC_BASE)
|
|
li t1, 0x03
|
|
sw t1, AR933X_RTC_REG_FORCE_WAKE(t0)
|
|
nop
|
|
nop
|
|
|
|
/* RTC Reset */
|
|
li t1, 0x00
|
|
sw t1, AR933X_RTC_REG_RESET(t0)
|
|
nop
|
|
nop
|
|
|
|
li t1, 0x01
|
|
sw t1, AR933X_RTC_REG_RESET(t0)
|
|
nop
|
|
nop
|
|
|
|
/* Wait for RTC in on state */
|
|
1:
|
|
lw t1, AR933X_RTC_REG_STATUS(t0)
|
|
andi t1, t1, 0x02
|
|
beqz t1, 1b
|
|
nop
|
|
|
|
/* Program ki/kd */
|
|
li t0, CKSEG1ADDR(AR933X_SRIF_BASE)
|
|
andi t1, t5, 0x01 # t5 BOOT_STRAP
|
|
bnez t1, 1f
|
|
nop
|
|
li t1, 0x19e82f01
|
|
b 2f
|
|
nop
|
|
1:
|
|
li t1, 0x18e82f01
|
|
2:
|
|
sw t1, AR933X_SRIF_DDR_DPLL2_REG(t0)
|
|
|
|
/* Program phase shift */
|
|
lw t1, AR933X_SRIF_DDR_DPLL3_REG(t0)
|
|
li t2, 0xc07fffff
|
|
and t1, t1, t2
|
|
li t2, 0x800000
|
|
or t1, t1, t2
|
|
sw t1, AR933X_SRIF_DDR_DPLL3_REG(t0)
|
|
nop
|
|
|
|
/* in some cases, the SoC doesn't start with higher clock on AHB */
|
|
li t0, CKSEG1ADDR(AR71XX_PLL_BASE)
|
|
li t1, AHB_DIV_TO_4(PLL_BYPASS(PLL_CLK_CONTROL_VAL))
|
|
sw t1, AR933X_PLL_CLK_CTRL_REG(t0)
|
|
nop
|
|
|
|
/* Set SETTLE_TIME in CPU PLL */
|
|
andi t1, t5, 0x01 # t5 BOOT_STRAP
|
|
bnez t1, 1f
|
|
nop
|
|
li t1, 0x0352
|
|
b 2f
|
|
nop
|
|
1:
|
|
li t1, 0x0550
|
|
2:
|
|
sw t1, AR71XX_PLL_REG_SEC_CONFIG(t0)
|
|
nop
|
|
|
|
/* Set nint, frac, refdiv, outdiv, range according to xtal */
|
|
0:
|
|
andi t1, t5, 0x01 # t5 BOOT_STRAP
|
|
bnez t1, 1f
|
|
nop
|
|
li t1, SET_PLL_PD(PLL_CPU_CONFIG_VAL_25M)
|
|
b 2f
|
|
nop
|
|
1:
|
|
li t1, SET_PLL_PD(PLL_CPU_CONFIG_VAL_40M)
|
|
2:
|
|
sw t1, AR933X_PLL_CPU_CONFIG_REG(t0)
|
|
nop
|
|
1:
|
|
lw t1, AR933X_PLL_CPU_CONFIG_REG(t0)
|
|
li t2, 0x80000000
|
|
and t1, t1, t2
|
|
bnez t1, 1b
|
|
nop
|
|
|
|
/* Put frac bit19:10 configuration */
|
|
li t1, 0x1003E8
|
|
sw t1, AR933X_PLL_DITHER_FRAC_REG(t0)
|
|
nop
|
|
|
|
/* Clear PLL power down bit in CPU PLL configuration */
|
|
andi t1, t5, 0x01 # t5 BOOT_STRAP
|
|
bnez t1, 1f
|
|
nop
|
|
li t1, PLL_CPU_CONFIG_VAL_25M
|
|
b 2f
|
|
nop
|
|
1:
|
|
li t1, PLL_CPU_CONFIG_VAL_40M
|
|
2:
|
|
sw t1, AR933X_PLL_CPU_CONFIG_REG(t0)
|
|
nop
|
|
|
|
/* Wait for PLL update -> bit 31 in CPU_PLL_CONFIG should be 0 */
|
|
1:
|
|
lw t1, AR933X_PLL_CPU_CONFIG_REG(t0)
|
|
li t2, 0x80000000
|
|
and t1, t1, t2
|
|
bnez t1, 1b
|
|
nop
|
|
|
|
/* Confirm DDR PLL lock */
|
|
li t3, 100
|
|
li t4, 0
|
|
|
|
2:
|
|
addi t4, t4, 1
|
|
bgt t4, t3, 0b
|
|
nop
|
|
|
|
li t3, 5
|
|
3:
|
|
/* Clear do_meas */
|
|
li t0, CKSEG1ADDR(AR933X_SRIF_BASE)
|
|
lw t1, AR933X_SRIF_DDR_DPLL3_REG(t0)
|
|
li t2, 0xBFFFFFFF
|
|
and t1, t1, t2
|
|
sw t1, AR933X_SRIF_DDR_DPLL3_REG(t0)
|
|
nop
|
|
|
|
li t2, 10
|
|
1:
|
|
subu t2, t2, 1
|
|
bnez t2, 1b
|
|
nop
|
|
|
|
/* Set do_meas */
|
|
li t2, 0x40000000
|
|
or t1, t1, t2
|
|
sw t1, AR933X_SRIF_DDR_DPLL3_REG(t0)
|
|
nop
|
|
|
|
/* Check meas_done */
|
|
1:
|
|
lw t1, AR933X_SRIF_DDR_DPLL4_REG(t0)
|
|
andi t1, t1, 0x8
|
|
beqz t1, 1b
|
|
nop
|
|
|
|
lw t1, AR933X_SRIF_DDR_DPLL3_REG(t0)
|
|
li t2, 0x007FFFF8
|
|
and t1, t1, t2
|
|
srl t1, t1, 3
|
|
li t2, 0x4000
|
|
bgt t1, t2, 2b
|
|
nop
|
|
addi t3, t3, -1
|
|
bnez t3, 3b
|
|
nop
|
|
|
|
/* clear PLL bypass (bit 2) in CPU CLOCK CONTROL register */
|
|
li t0, CKSEG1ADDR(AR71XX_PLL_BASE)
|
|
li t1, PLL_CLK_CONTROL_VAL
|
|
sw t1, AR933X_PLL_CLK_CTRL_REG(t0)
|
|
nop
|
|
|
|
nop
|
|
jr ra
|
|
nop
|
|
END(lowlevel_init)
|