mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-17 08:43:07 +00:00
5decbf5300
This commit adds:
- new uclass id: UCLASS_ADC
- new uclass driver: drivers/adc/adc-uclass.c
The new uclass's API allows for ADC operation on:
* single-channel with channel selection by a number
* multti-channel with channel selection by bit mask
ADC uclass's functions:
* single-channel:
- adc_start_channel() - start channel conversion
- adc_channel_data() - get conversion data
- adc_channel_single_shot() - start/get conversion data
* multi-channel:
- adc_start_channels() - start selected channels conversion
- adc_channels_data() - get conversion data
- adc_channels_single_shot() - start/get conversion data for channels
selected by bit mask
* general:
- adc_stop() - stop the conversion
- adc_vdd_value() - positive reference Voltage value with polarity [uV]
- adc_vss_value() - negative reference Voltage value with polarity [uV]
- adc_data_mask() - conversion data bit mask
The device tree can provide below constraints/properties:
- vdd-polarity-negative: if true: Vdd = vdd-microvolts * (-1)
- vss-polarity-negative: if true: Vss = vss-microvolts * (-1)
- vdd-supply: phandle to Vdd regulator's node
- vss-supply: phandle to Vss regulator's node
And optional, checked only if the above corresponding, doesn't exist:
- vdd-microvolts: positive reference Voltage [uV]
- vss-microvolts: negative reference Voltage [uV]
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
62 lines
1.8 KiB
Text
62 lines
1.8 KiB
Text
ADC device binding
|
|
|
|
There are no mandatory properties for ADC. However, if Voltage info is required,
|
|
then there are two options:
|
|
- use microvolts constraint or
|
|
- use regulator phandle to enable/read supply's Voltage
|
|
|
|
Properties and constraints:
|
|
*optional and always checked, Voltage polarity info:
|
|
- vdd-polarity-negative: positive reference Voltage has a negative polarity
|
|
- vss-polarity-negative: negative reference Voltage has a negative polarity
|
|
|
|
Chose one option, for each supply (Vdd/Vss):
|
|
|
|
*optional and always checked, supply Voltage constants:
|
|
- vdd-supply: phandle to Vdd regulator's node
|
|
- vss-supply: phandle to Vss regulator's node
|
|
|
|
*optional and checked only if the above corresponding, doesn't exist:
|
|
- vdd-microvolts: positive reference Voltage value [uV]
|
|
- vss-microvolts: negative reference Voltage value [uV]
|
|
|
|
Example with constant 'Vdd' value:
|
|
adc@1000000 {
|
|
compatible = "some-adc";
|
|
reg = <0xaabb000 0x100>;
|
|
status = "enabled";
|
|
vdd-microvolts = <1800000>;
|
|
};
|
|
|
|
Example of supply phandle usage, for the ADC's VDD/VSS references as below:
|
|
_______ _______
|
|
|Sandbox| |Sandbox|
|
|
: PMIC : : ADC :
|
|
. . . .
|
|
| | (Vdd) | AIN0|-->
|
|
| BUCK2|-------|VDDref |
|
|
| (3.3V)| _|VSSref |
|
|
|_______| | |_______|
|
|
_|_
|
|
|
|
For the above PMIC, the node can be defined as follows:
|
|
sandbox_pmic {
|
|
compatible = "sandbox,pmic";
|
|
...
|
|
buck2: buck2 {
|
|
regulator-name = "SUPPLY_3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
...
|
|
};
|
|
|
|
For the above ADC, the node can be defined as follows:
|
|
adc@0 {
|
|
compatible = "sandbox,adc";
|
|
vdd-supply = <&buck2>;
|
|
vss-microvolts = <0>;
|
|
};
|
|
|
|
The ADC uclass code, will enable the supply before start of the conversion,
|
|
but it will not configure the regulator settings.
|