mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
b1be79b417
Migrate to DM_VIDEO, update the device tree and remove code that is no longer necessary. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
412 lines
10 KiB
Text
412 lines
10 KiB
Text
/*
|
|
* Copyright 2017 Armadeus Systems <support@armadeus.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public
|
|
* License along with this file; if not, write to the Free
|
|
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "imx6ul-opos6ul.dtsi"
|
|
|
|
/ {
|
|
model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
|
|
compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm3 0 191000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <7>;
|
|
power-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_keys>;
|
|
|
|
user-button {
|
|
label = "User button";
|
|
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_MISC>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
user-led {
|
|
label = "User";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_led>;
|
|
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
onewire {
|
|
compatible = "w1-gpio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_w1>;
|
|
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
reg_usbotg1_vbus: regulator-usbotg1vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usbotg1vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg1_vbus>;
|
|
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usbotg2_vbus: regulator-usbotg2vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usbotg2vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg2_vbus>;
|
|
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
&adc1 {
|
|
vref-supply = <®_3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&can1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan1>;
|
|
xceiver-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&can2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan2>;
|
|
xceiver-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ecspi4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi4>;
|
|
cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
|
|
spidev0: spi@0 {
|
|
compatible = "spidev";
|
|
reg = <0>;
|
|
spi-max-frequency = <5000000>;
|
|
};
|
|
|
|
spidev1: spi@1 {
|
|
compatible = "spidev";
|
|
reg = <1>;
|
|
spi-max-frequency = <5000000>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
clock_frequency = <400000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
clock_frequency = <400000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&lcdif {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcdif>;
|
|
display = <&display0>;
|
|
lcd-supply = <®_3v3>;
|
|
status = "okay";
|
|
|
|
display0: display0 {
|
|
bits-per-pixel = <18>;
|
|
bus-width = <18>;
|
|
|
|
display-timings {
|
|
timing0: timing0 {
|
|
clock-frequency = <33000033>;
|
|
hactive = <800>;
|
|
vactive = <480>;
|
|
hback-porch = <96>;
|
|
hfront-porch = <96>;
|
|
vback-porch = <20>;
|
|
vfront-porch = <21>;
|
|
hsync-len = <64>;
|
|
vsync-len = <4>;
|
|
de-active = <1>;
|
|
pixelclk-active = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&snvs_pwrkey {
|
|
status = "disabled";
|
|
};
|
|
|
|
&tsc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_tsc>;
|
|
xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
|
|
measure-delay-time = <0xffff>;
|
|
pre-charge-time = <0xffff>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg1_id>;
|
|
vbus-supply = <®_usbotg1_vbus>;
|
|
dr_mode = "otg";
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg2 {
|
|
vbus-supply = <®_usbotg2_vbus>;
|
|
dr_mode = "host";
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpios>;
|
|
|
|
pinctrl_ecspi4: ecspi4grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
|
|
MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
|
|
MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
|
|
MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
|
|
MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan1: flexcan1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
|
|
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan2: flexcan2grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
|
|
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpios: gpiosgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
|
|
MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
|
|
MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
|
|
MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
|
|
MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
|
|
MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
|
|
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
|
|
MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
|
|
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0
|
|
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
|
|
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
|
|
MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
|
|
MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0
|
|
MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0
|
|
MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0
|
|
MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_keys: gpiokeysgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
|
|
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
|
|
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_lcdif: lcdifgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
|
|
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
|
|
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
|
|
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
|
|
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
|
|
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
|
|
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
|
|
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
|
|
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
|
|
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
|
|
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
|
|
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
|
|
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
|
|
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
|
|
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
|
|
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
|
|
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
|
|
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
|
|
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
|
|
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
|
|
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
|
|
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_led: ledgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm3: pwm3grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_tsc: tscgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
|
|
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
|
|
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
|
|
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
|
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
|
|
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg1_id: usbotg1idgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg1_vbus: usbotg1vbusgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg2_vbus: usbotg2vbusgrp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_w1: w1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0
|
|
>;
|
|
};
|
|
};
|