mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 09:30:10 +00:00
d98b0523cf
Now that warm booting is not supported, there isn't a need for the BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them. Note that this change makes the board info bd_bootflags field useless. It will always be set to 0, but we leave it around so that we don't break the board info structure that some OSes are expecting to be passed from U-Boot. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
241 lines
7.8 KiB
C
241 lines
7.8 KiB
C
/*
|
|
* AMIRIX.h: AMIRIX specific config options
|
|
*
|
|
* Author : Frank Smith (smith at amirix dot com)
|
|
*
|
|
* Derived from : other configuration header files in this tree
|
|
*
|
|
* This software may be used and distributed according to the terms of
|
|
* the GNU General Public License (GPL) version 2, incorporated herein by
|
|
* reference. Drivers based on or derived from this code fall under the GPL
|
|
* and must retain the authorship, copyright and this license notice. This
|
|
* file is not a complete program and may only be used when the entire
|
|
* program is licensed under the GPL.
|
|
*
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
#define CONFIG_405 1 /* This is a PPC405 CPU */
|
|
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
|
|
|
|
#define CONFIG_AP1000 1 /* ...on an AP1000 board */
|
|
|
|
/*
|
|
* Start at bottom of RAM, but at an aliased address so that it looks
|
|
* like it's not in RAM. This is a bit of voodoo to allow it to be
|
|
* run from RAM instead of Flash.
|
|
*/
|
|
#define CONFIG_SYS_TEXT_BASE 0x08000000
|
|
|
|
#define CONFIG_PCI 1
|
|
|
|
#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
|
|
#define CONFIG_SYS_PROMPT "0> "
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
|
|
#define CONFIG_COMMAND_EDIT 1
|
|
#define CONFIG_COMPLETE_ADDRESSES 1
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_NVRAM
|
|
#undef CONFIG_ENV_IS_IN_FLASH
|
|
#else
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
#undef CONFIG_ENV_IS_IN_NVRAM
|
|
#endif
|
|
#endif
|
|
|
|
#define CONFIG_BAUDRATE 57600
|
|
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
|
|
|
|
#define CONFIG_BOOTCOMMAND "" /* autoboot command */
|
|
|
|
#define CONFIG_BOOTARGS "console=ttyS0,57600"
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_CMD_IRQ
|
|
#define CONFIG_CMD_MVENV
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_PING
|
|
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 30000000
|
|
|
|
#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
/* usually: (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+4+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_ALT_MEMTEST 1
|
|
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 4 ... 16 MB in DRAM */
|
|
|
|
/*
|
|
* If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
|
|
* If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
|
|
* Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
|
|
* The Linux BASE_BAUD define should match this configuration.
|
|
* baseBaud = cpuClock/(uartDivisor*16)
|
|
* If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
|
|
* set Linux BASE_BAUD to 403200.
|
|
*/
|
|
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
|
|
#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
|
|
|
|
#define CONFIG_SYS_NS16550_CLK 40000000
|
|
#define CONFIG_SYS_DUART_CHAN 0
|
|
#define CONFIG_SYS_NS16550_COM1 (0x4C000000 + 0x1000)
|
|
#define CONFIG_SYS_NS16550_COM2 (0x4C800000 + 0x1000)
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 4
|
|
#define CONFIG_SYS_NS16550 1
|
|
#define CONFIG_SYS_INIT_CHAN1 1
|
|
#define CONFIG_SYS_INIT_CHAN2 0
|
|
|
|
/* The following table includes the supported baudrates */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x00200000 /* default load address */
|
|
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
|
|
|
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_FLASH_BASE 0x20000000
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
|
|
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#define CONFIG_SYS_FLASH_CFI 1
|
|
#define CONFIG_SYS_PROGFLASH_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_CONFFLASH_BASE 0x24000000
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
|
|
#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */
|
|
|
|
/* BEG ENVIRONNEMENT FLASH */
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */
|
|
#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* see README - env sector total size */
|
|
#endif
|
|
/* END ENVIRONNEMENT FLASH */
|
|
/*-----------------------------------------------------------------------
|
|
* NVRAM organization
|
|
*/
|
|
#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */
|
|
#define CONFIG_SYS_NVRAM_SIZE 0x1ff8 /* NVRAM size */
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_NVRAM
|
|
#define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */
|
|
#define CONFIG_ENV_ADDR \
|
|
(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */
|
|
#endif
|
|
|
|
/*
|
|
* Init Memory Controller:
|
|
*
|
|
* BR0/1 and OR0/1 (FLASH)
|
|
*/
|
|
|
|
#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */
|
|
#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
|
|
|
|
/* Configuration Port location */
|
|
#define CONFIG_PORT_ADDR 0xF0000500
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
*/
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x400000 /* inside of SDRAM */
|
|
#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for Serial Presence Detect EEPROM address
|
|
* (to get SDRAM settings)
|
|
*/
|
|
#define SPD_EEPROM_ADDRESS 0x50
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
/* JFFS2 stuff */
|
|
|
|
#define CONFIG_SYS_JFFS2_FIRST_BANK 0
|
|
#define CONFIG_SYS_JFFS2_NUM_BANKS 1
|
|
#define CONFIG_SYS_JFFS2_FIRST_SECTOR 1
|
|
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_E1000
|
|
|
|
#define CONFIG_SYS_ETH_DEV_FN 0x0800
|
|
#define CONFIG_SYS_ETH_IOBASE 0x31000000
|
|
#define CONFIG_SYS_ETH_MEMBASE 0x32000000
|
|
|
|
#endif /* __CONFIG_H */
|