mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-20 11:43:22 +00:00
e82a316d7f
This patch adds support to both Faraday FUSBH200 and FOTG210, the differences between Faraday EHCI and standard EHCI are listed bellow: 1. The PORTSC starts at 0x30 instead of 0x44. 2. The CONFIGFLAG(0x40) is not only un-implemented, and also has its address space removed. 3. Faraday EHCI is a TDI design, but it doesn't compatible with the general TDI implementation found at both U-Boot and Linux. 4. The ISOC descriptors differ from standard EHCI in several ways. But since U-boot doesn't support ISOC, we don't have to worry about that. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Marek Vasut <marex@denx.de>
61 lines
2.4 KiB
C
61 lines
2.4 KiB
C
/*
|
|
* Faraday USB 2.0 EHCI Controller
|
|
*
|
|
* (C) Copyright 2010 Faraday Technology
|
|
* Dante Su <dantesu@faraday-tech.com>
|
|
*
|
|
* This file is released under the terms of GPL v2 and any later version.
|
|
* See the file COPYING in the root directory of the source tree for details.
|
|
*/
|
|
|
|
#ifndef _FUSBH200_H
|
|
#define _FUSBH200_H
|
|
|
|
struct fusbh200_regs {
|
|
struct {
|
|
uint32_t data[4];
|
|
} hccr; /* 0x00 - 0x0f: hccr */
|
|
struct {
|
|
uint32_t data[9];
|
|
} hcor; /* 0x10 - 0x33: hcor */
|
|
uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */
|
|
uint32_t rsvd[2];
|
|
uint32_t bmcsr; /* 0x40: Bus Monitor Control Status Register */
|
|
uint32_t bmisr; /* 0x44: Bus Monitor Interrupt Status Register */
|
|
uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */
|
|
};
|
|
|
|
/* EOF & Async. Schedule Sleep Timer Register */
|
|
#define EASSTR_RUNNING (1 << 6) /* Put transceiver in running/resume mode */
|
|
#define EASSTR_SUSPEND (0 << 6) /* Put transceiver in suspend mode */
|
|
#define EASSTR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */
|
|
#define EASSTR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */
|
|
#define EASSTR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
|
|
|
|
/* Bus Monitor Control Status Register */
|
|
#define BMCSR_SPD_HIGH (2 << 9) /* Speed of the attached device */
|
|
#define BMCSR_SPD_LOW (1 << 9)
|
|
#define BMCSR_SPD_FULL (0 << 9)
|
|
#define BMCSR_SPD_MASK (3 << 9)
|
|
#define BMCSR_SPD_SHIFT 9
|
|
#define BMCSR_SPD(x) ((x >> 9) & 0x03)
|
|
#define BMCSR_VBUS (1 << 8) /* VBUS Valid */
|
|
#define BMCSR_VBUS_OFF (1 << 4) /* VBUS Off */
|
|
#define BMCSR_VBUS_ON (0 << 4) /* VBUS On */
|
|
#define BMCSR_IRQLH (1 << 3) /* IRQ triggered at level-high */
|
|
#define BMCSR_IRQLL (0 << 3) /* IRQ triggered at level-low */
|
|
#define BMCSR_HALFSPD (1 << 2) /* Half speed mode for FPGA test */
|
|
#define BMCSR_HFT_LONG (1 << 1) /* HDISCON noise filter = 270 us*/
|
|
#define BMCSR_HFT (0 << 1) /* HDISCON noise filter = 135 us*/
|
|
#define BMCSR_VFT_LONG (1 << 1) /* VBUS noise filter = 472 us*/
|
|
#define BMCSR_VFT (0 << 1) /* VBUS noise filter = 135 us*/
|
|
|
|
/* Bus Monitor Interrupt Status Register */
|
|
/* Bus Monitor Interrupt Enable Register */
|
|
#define BMISR_DMAERR (1 << 4) /* DMA error */
|
|
#define BMISR_DMA (1 << 3) /* DMA complete */
|
|
#define BMISR_DEVRM (1 << 2) /* device removed */
|
|
#define BMISR_OVD (1 << 1) /* over-current detected */
|
|
#define BMISR_VBUSERR (1 << 0) /* VBUS error */
|
|
|
|
#endif
|