mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 11:13:07 +00:00
4f71c80b0d
Add DT for DH DRC Compact unit, which is a universal controller device. The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD card slot, eMMC and SDIO Wi-Fi. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
326 lines
6.5 KiB
Text
326 lines
6.5 KiB
Text
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
|
/*
|
|
* Copyright (C) 2022 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
/ {
|
|
aliases {
|
|
ethernet0 = ðernet0;
|
|
ethernet1 = &ksz8851;
|
|
mmc0 = &sdmmc1;
|
|
rtc0 = &hwrtc;
|
|
rtc1 = &rtc;
|
|
serial0 = &uart4;
|
|
serial1 = &uart8;
|
|
serial2 = &usart3;
|
|
serial3 = &uart5;
|
|
spi0 = &qspi;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
led {
|
|
compatible = "gpio-leds";
|
|
led1 {
|
|
label = "yellow:user0";
|
|
gpios = <&gpioz 6 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led2 {
|
|
label = "red:user1";
|
|
gpios = <&gpioz 3 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
ethernet_vio: vioregulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vio";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpioh 2 GPIO_ACTIVE_LOW>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vdd>;
|
|
};
|
|
};
|
|
|
|
&adc { /* X11 ADC inputs */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&adc12_ain_pins_b>;
|
|
vdd-supply = <&vdd>;
|
|
vdda-supply = <&vdda>;
|
|
vref-supply = <&vdda>;
|
|
status = "okay";
|
|
|
|
adc1: adc@0 {
|
|
st,adc-channels = <0 1 6>;
|
|
st,min-sample-time-nsecs = <5000>;
|
|
status = "okay";
|
|
};
|
|
|
|
adc2: adc@100 {
|
|
st,adc-channels = <0 1 2>;
|
|
st,min-sample-time-nsecs = <5000>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
ðernet0 {
|
|
status = "okay";
|
|
pinctrl-0 = <ðernet0_rgmii_pins_c>;
|
|
pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>;
|
|
pinctrl-names = "default", "sleep";
|
|
phy-mode = "rgmii";
|
|
max-speed = <1000>;
|
|
phy-handle = <&phy0>;
|
|
|
|
mdio0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dwmac-mdio";
|
|
reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <1000>;
|
|
reset-post-delay-us = <1000>;
|
|
|
|
phy0: ethernet-phy@7 {
|
|
reg = <7>;
|
|
|
|
rxc-skew-ps = <1500>;
|
|
rxdv-skew-ps = <540>;
|
|
rxd0-skew-ps = <420>;
|
|
rxd1-skew-ps = <420>;
|
|
rxd2-skew-ps = <420>;
|
|
rxd3-skew-ps = <420>;
|
|
|
|
txc-skew-ps = <1440>;
|
|
txen-skew-ps = <540>;
|
|
txd0-skew-ps = <420>;
|
|
txd1-skew-ps = <420>;
|
|
txd2-skew-ps = <420>;
|
|
txd3-skew-ps = <420>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&fmc {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&fmc_pins_b>;
|
|
pinctrl-1 = <&fmc_sleep_pins_b>;
|
|
status = "okay";
|
|
|
|
ksz8851: ethernet@1,0 {
|
|
compatible = "micrel,ks8851-mll";
|
|
reg = <1 0x0 0x2>, <1 0x2 0x20000>;
|
|
interrupt-parent = <&gpioc>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
bank-width = <2>;
|
|
|
|
/* Timing values are in nS */
|
|
st,fmc2-ebi-cs-mux-enable;
|
|
st,fmc2-ebi-cs-transaction-type = <4>;
|
|
st,fmc2-ebi-cs-buswidth = <16>;
|
|
st,fmc2-ebi-cs-address-setup-ns = <5>;
|
|
st,fmc2-ebi-cs-address-hold-ns = <5>;
|
|
st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
|
|
st,fmc2-ebi-cs-data-setup-ns = <45>;
|
|
st,fmc2-ebi-cs-data-hold-ns = <1>;
|
|
st,fmc2-ebi-cs-write-address-setup-ns = <5>;
|
|
st,fmc2-ebi-cs-write-address-hold-ns = <5>;
|
|
st,fmc2-ebi-cs-write-bus-turnaround-ns = <5>;
|
|
st,fmc2-ebi-cs-write-data-setup-ns = <45>;
|
|
st,fmc2-ebi-cs-write-data-hold-ns = <1>;
|
|
};
|
|
};
|
|
|
|
&gpioa {
|
|
gpio-line-names = "", "", "", "",
|
|
"DRCC-VAR2", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpioe {
|
|
gpio-line-names = "", "", "", "",
|
|
"", "DRCC-GPIO0", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpiog {
|
|
gpio-line-names = "", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"DRCC-GPIO5", "", "", "";
|
|
};
|
|
|
|
&gpioh {
|
|
gpio-line-names = "", "", "", "DRCC-HW2",
|
|
"DRCC-GPIO4", "", "", "",
|
|
"DRCC-HW1", "DRCC-HW0", "", "DRCC-VAR1",
|
|
"DRCC-VAR0", "", "", "DRCC-GPIO6";
|
|
};
|
|
|
|
&gpioi {
|
|
gpio-line-names = "", "", "", "",
|
|
"", "", "", "DRCC-GPIO2",
|
|
"", "DRCC-GPIO1", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&i2c1 { /* X11 I2C1 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins_b>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
};
|
|
|
|
&i2c4 {
|
|
hwrtc: rtc@32 {
|
|
compatible = "microcrystal,rv8803";
|
|
reg = <0x32>;
|
|
};
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c04";
|
|
reg = <0x50>;
|
|
pagesize = <16>;
|
|
};
|
|
};
|
|
|
|
&sdmmc1 { /* MicroSD */
|
|
pinctrl-names = "default", "opendrain", "sleep";
|
|
pinctrl-0 = <&sdmmc1_b4_pins_a>;
|
|
pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
|
|
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
|
|
cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
|
|
disable-wp;
|
|
st,neg-edge;
|
|
bus-width = <4>;
|
|
vmmc-supply = <&vdd>;
|
|
vqmmc-supply = <&vdd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc2 { /* eMMC */
|
|
pinctrl-names = "default", "opendrain", "sleep";
|
|
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
|
|
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
|
|
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
|
|
bus-width = <8>;
|
|
no-sd;
|
|
no-sdio;
|
|
non-removable;
|
|
st,neg-edge;
|
|
vmmc-supply = <&v3v3>;
|
|
vqmmc-supply = <&vdd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc3 { /* SDIO Wi-Fi */
|
|
pinctrl-names = "default", "opendrain", "sleep";
|
|
pinctrl-0 = <&sdmmc3_b4_pins_a>;
|
|
pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
|
|
pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
|
|
broken-cd;
|
|
bus-width = <4>;
|
|
mmc-ddr-3_3v;
|
|
st,neg-edge;
|
|
vmmc-supply = <&v3v3>;
|
|
vqmmc-supply = <&v3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi2 { /* X11 SPI */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2_pins_b>;
|
|
cs-gpios = <&gpioi 0 0>;
|
|
status = "disabled";
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
};
|
|
|
|
&uart4 {
|
|
label = "UART0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_pins_d>;
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart5 { /* X11 UART */
|
|
label = "X11-UART5";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart5_pins_a>;
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart8 {
|
|
label = "RS485-1";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
|
|
uart-has-rtscts;
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&usart3 { /* RS485 or RS232 */
|
|
label = "RS485-2";
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&usart3_pins_e>;
|
|
pinctrl-1 = <&usart3_sleep_pins_e>;
|
|
uart-has-rtscts;
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh_ehci {
|
|
phys = <&usbphyc_port0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh_ohci {
|
|
phys = <&usbphyc_port0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg_hs {
|
|
dr_mode = "otg";
|
|
pinctrl-0 = <&usbotg_hs_pins_a>;
|
|
pinctrl-names = "default";
|
|
phy-names = "usb2-phy";
|
|
phys = <&usbphyc_port1 0>;
|
|
vbus-supply = <&vbus_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc_port0 {
|
|
phy-supply = <&vdd_usb>;
|
|
vdda1v1-supply = <®11>;
|
|
vdda1v8-supply = <®18>;
|
|
connector {
|
|
compatible = "usb-a-connector";
|
|
vbus-supply = <&vbus_sw>;
|
|
};
|
|
};
|
|
|
|
&usbphyc_port1 {
|
|
phy-supply = <&vdd_usb>;
|
|
vdda1v1-supply = <®11>;
|
|
vdda1v8-supply = <®18>;
|
|
};
|