mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 11:13:07 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
439 lines
10 KiB
Text
439 lines
10 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/clock/rk3036-cru.h>
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
compatible = "rockchip,rk3036";
|
|
|
|
interrupt-parent = <&gic>;
|
|
|
|
aliases {
|
|
gpio0 = &gpio0;
|
|
gpio1 = &gpio1;
|
|
gpio2 = &gpio2;
|
|
i2c1 = &i2c1;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
mmc0 = &emmc;
|
|
mmc1 = &sdmmc;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x60000000 0x40000000>;
|
|
};
|
|
|
|
arm-pmu {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>, <&cpu1>;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "rockchip,rk3036-smp";
|
|
|
|
cpu0: cpu@f00 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0xf00>;
|
|
operating-points = <
|
|
/* KHz uV */
|
|
816000 1000000
|
|
>;
|
|
#cooling-cells = <2>; /* min followed by max */
|
|
clock-latency = <40000>;
|
|
clocks = <&cru ARMCLK>;
|
|
resets = <&cru SRST_CORE0>;
|
|
};
|
|
cpu1: cpu@f01 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0xf01>;
|
|
resets = <&cru SRST_CORE1>;
|
|
};
|
|
};
|
|
|
|
amba {
|
|
compatible = "arm,amba-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
pdma: pdma@20078000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x20078000 0x4000>;
|
|
arm,pl330-broken-no-flushp;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
clocks = <&cru ACLK_DMAC2>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
};
|
|
|
|
xin24m: oscillator {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "xin24m";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
arm,cpu-registers-not-fw-configured;
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
cru: clock-controller@20000000 {
|
|
compatible = "rockchip,rk3036-cru";
|
|
reg = <0x20000000 0x1000>;
|
|
rockchip,grf = <&grf>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
assigned-clocks = <&cru PLL_GPLL>;
|
|
assigned-clock-rates = <594000000>;
|
|
};
|
|
|
|
uart0: serial@20060000 {
|
|
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
|
|
reg = <0x20060000 0x100>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
|
};
|
|
|
|
uart1: serial@20064000 {
|
|
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
|
|
reg = <0x20064000 0x100>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_xfer>;
|
|
};
|
|
|
|
uart2: serial@20068000 {
|
|
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
|
|
reg = <0x20068000 0x100>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_xfer>;
|
|
};
|
|
|
|
pwm0: pwm@20050000 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050000 0x10>;
|
|
#pwm-cells = <3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm0_pin>;
|
|
clocks = <&cru PCLK_PWM>;
|
|
clock-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm1: pwm@20050010 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050010 0x10>;
|
|
#pwm-cells = <3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm1_pin>;
|
|
clocks = <&cru PCLK_PWM>;
|
|
clock-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm2: pwm@20050020 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050020 0x10>;
|
|
#pwm-cells = <3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm2_pin>;
|
|
clocks = <&cru PCLK_PWM>;
|
|
clock-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm3: pwm@20050030 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050030 0x10>;
|
|
#pwm-cells = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm3_pin>;
|
|
clocks = <&cru PCLK_PWM>;
|
|
clock-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
sram: sram@10080000 {
|
|
compatible = "rockchip,rk3036-smp-sram", "mmio-sram";
|
|
reg = <0x10080000 0x2000>;
|
|
};
|
|
|
|
gic: interrupt-controller@10139000 {
|
|
compatible = "arm,gic-400";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
|
|
reg = <0x10139000 0x1000>,
|
|
<0x1013a000 0x1000>,
|
|
<0x1013c000 0x2000>,
|
|
<0x1013e000 0x2000>;
|
|
interrupts = <GIC_PPI 9 0xf04>;
|
|
};
|
|
|
|
grf: syscon@20008000 {
|
|
compatible = "rockchip,rk3036-grf", "syscon";
|
|
reg = <0x20008000 0x1000>;
|
|
};
|
|
|
|
usb_otg: usb@10180000 {
|
|
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
|
|
"snps,dwc2";
|
|
reg = <0x10180000 0x40000>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_OTG0>;
|
|
clock-names = "otg";
|
|
dr_mode = "otg";
|
|
g-np-tx-fifo-size = <16>;
|
|
g-rx-fifo-size = <275>;
|
|
g-tx-fifo-size = <256 128 128 64 64 32>;
|
|
g-use-dma;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_host: usb@101c0000 {
|
|
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
|
|
"snps,dwc2";
|
|
reg = <0x101c0000 0x40000>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_OTG1>;
|
|
clock-names = "otg";
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
emmc: dwmmc@1021c000 {
|
|
compatible = "rockchip,rk3288-dw-mshc";
|
|
clock-frequency = <37500000>;
|
|
max-frequency = <37500000>;
|
|
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
|
|
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
|
|
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
|
|
dmas = <&pdma 12>;
|
|
dma-names = "rx-tx";
|
|
fifo-depth = <0x100>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x1021c000 0x4000>;
|
|
broken-cd;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-ddr-1_8v;
|
|
disable-wp;
|
|
fifo-mode;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
default-sample-phase = <158>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
|
};
|
|
|
|
sdmmc: dwmmc@10214000 {
|
|
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
|
|
reg = <0x10214000 0x4000>;
|
|
clock-frequency = <37500000>;
|
|
max-frequency = <37500000>;
|
|
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x100>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pinctrl: pinctrl {
|
|
compatible = "rockchip,rk3036-pinctrl";
|
|
rockchip,grf = <&grf>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gpio0: gpio0@2007c000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x2007c000 0x100>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO0>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio1: gpio1@20080000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x20080000 0x100>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO1>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio2@20084000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x20084000 0x100>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru PCLK_GPIO2>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pcfg_pull_up: pcfg-pull-up {
|
|
bias-pull-up;
|
|
};
|
|
|
|
pcfg_pull_down: pcfg-pull-down {
|
|
bias-pull-down;
|
|
};
|
|
|
|
pcfg_pull_none: pcfg-pull-none {
|
|
bias-disable;
|
|
};
|
|
|
|
emmc {
|
|
/*
|
|
* We run eMMC at max speed; bump up drive strength.
|
|
* We also have external pulls, so disable the internal ones.
|
|
*/
|
|
emmc_clk: emmc-clk {
|
|
rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
|
|
emmc_cmd: emmc-cmd {
|
|
rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
|
|
emmc_bus8: emmc-bus8 {
|
|
rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 25 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 26 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 27 RK_FUNC_2 &pcfg_pull_none>;
|
|
/*
|
|
<1 28 RK_FUNC_2 &pcfg_pull_up>,
|
|
<1 29 RK_FUNC_2 &pcfg_pull_up>,
|
|
<1 30 RK_FUNC_2 &pcfg_pull_up>,
|
|
<1 31 RK_FUNC_2 &pcfg_pull_up>;
|
|
*/
|
|
};
|
|
};
|
|
|
|
uart0 {
|
|
uart0_xfer: uart0-xfer {
|
|
rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>,
|
|
<0 17 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart0_cts: uart0-cts {
|
|
rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart0_rts: uart0-rts {
|
|
rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
uart1 {
|
|
uart1_xfer: uart1-xfer {
|
|
rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
|
|
<2 23 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
/* no rts / cts for uart1 */
|
|
};
|
|
|
|
uart2 {
|
|
uart2_xfer: uart2-xfer {
|
|
rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 19 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
/* no rts / cts for uart2 */
|
|
};
|
|
|
|
pwm0 {
|
|
pwm0_pin: pwm0-pin {
|
|
rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pwm1 {
|
|
pwm1_pin: pwm1-pin {
|
|
rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pwm2 {
|
|
pwm2_pin: pwm2-pin {
|
|
rockchip,pins = <0 1 2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pwm3 {
|
|
pwm3_pin: pwm3-pin {
|
|
rockchip,pins = <0 27 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
i2c1 {
|
|
i2c1_xfer: i2c1-xfer {
|
|
rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
|
|
<0 3 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c1: i2c@20056000 {
|
|
compatible = "rockchip,rk3288-i2c";
|
|
reg = <0x20056000 0x1000>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "i2c";
|
|
clocks = <&cru PCLK_I2C1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_xfer>;
|
|
status = "disabled";
|
|
};
|
|
};
|