Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-22 11:13:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/imx7-cm.dts
Marcel Ziswiler 7b4a934d73 imx: imx7-cm: prepare to synchronise device trees with linux 
As a preparatory step rename the qspi1 reference to qspi as this is how
it is named in the Linux upstream device tree.

This avoids the following error once synchronised:

+Error: arch/arm/dts/.imx7-cm.dtb.pre.tmp:96.1-7 Label or path qspi1 not
 found

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25 16:12:00 +02:00

432 lines
9.9 KiB
Text
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
//
// Copyright 2021 Ronetix GmbH
/dts-v1/;
#include "imx7d.dtsi"
/ {
model = "Ronetix iMX7-CM Board";
compatible = "ronetix,imx7-cm", "fsl,imx7d";
chosen {
stdout-path = &uart1;
};
/* DRAM size runtime extracted from the DDRC registers */
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0>;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led {
label = "gpio-led";
gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
};
};
reg_sd1_vmmc: regulator-sd1-vmmc {
compatible = "regulator-fixed";
regulator-name = "VDD_SD1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
startup-delay-us = <200000>;
off-on-delay-us = <20000>;
enable-active-high;
};
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_pwr>;
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg2_pwr>;
compatible = "regulator-fixed";
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&clks {
assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
<&clks IMX7D_CLKO2_ROOT_DIV>;
assigned-clock-parents = <&clks IMX7D_CKIL>;
assigned-clock-rates = <0>, <32768>;
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
};
};
};
&qspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi1_1>;
status = "okay";
ddrsmp=<0>;
flash0: mx25l25645g@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <29000000>;
reg = <0>;
};
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic@8 {
compatible = "fsl,pfuze3000";
reg = <0x08>;
regulators {
sw1a_reg: sw1a {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
/* use sw1c_reg to align with pfuze100/pfuze200 */
sw1c_reg: sw1b {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1475000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1850000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1650000>;
regulator-boot-on;
regulator-always-on;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen2_reg: vldo2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen3_reg: vccsd {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen4_reg: v33 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen5_reg: vldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen6_reg: vldo4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&uart1 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&usbotg1 {
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
vbus-supply = <&reg_usb_otg2_vbus>;
dr_mode = "host";
status = "okay";
};
/* SD card */
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
tuning-step = <2>;
vmmc-supply = <&reg_sd1_vmmc>;
wakeup-source;
no-1-8-v;
keep-power-in-suspend;
status = "okay";
};
/* eMMC */
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
assigned-clock-rates = <400000000>;
bus-width = <8>;
no-1-8-v;
fsl,tuning-step = <2>;
non-removable;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
>;
};
pinctrl_enet1: enet1grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 /* ETH_RESET */
>;
};
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x59
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x59
>;
};
pinctrl_usbotg1_pwr: usbotg_pwr {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14
>;
};
pinctrl_usbotg2_pwr: usbotg_pwr {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14
>;
};
pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
fsl,pins = <
MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15 /* CD */
MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* Vmmc */
MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
>;
};
pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
fsl,pins = <
MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
>;
};
pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
fsl,pins = <
MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
MX7D_PAD_SD3_CLK__SD3_CLK 0x19
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
>;
};
pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
>;
};
pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
>;
};
pinctrl_qspi1_1: qspi1grp_1 {
fsl,pins = <
MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x51
MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x51
MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x51
MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x51
MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x51
MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x51
>;
};
};
&iomuxc_lpsr {
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
>;
};
};
Reference in a new issue View git blame Copy permalink