mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 11:13:07 +00:00
1fb69a07bc
This is a collection of all the whitespace, renames, comment, and other changes that should not change the DT functionality from Linux v6.3-rc6. Signed-off-by: Andrew Davis <afd@ti.com>
453 lines
8.7 KiB
Text
453 lines
8.7 KiB
Text
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Device Tree for DA850 EVM board
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
/dts-v1/;
|
|
#include "da850.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
compatible = "ti,da850-evm", "ti,da850";
|
|
model = "DA850/AM1808/OMAP-L138 EVM";
|
|
|
|
chosen {
|
|
stdout-path = &serial2;
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
serial2 = &serial2;
|
|
ethernet0 = ð0;
|
|
spi0 = &spi1;
|
|
};
|
|
|
|
backlight: backlight-pwm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ecap2_pins>;
|
|
power-supply = <&backlight_lcd>;
|
|
compatible = "pwm-backlight";
|
|
/*
|
|
* The PWM here corresponds to production hardware. The
|
|
* schematic needs to be 1015171 (15 March 2010), Rev A
|
|
* or newer.
|
|
*/
|
|
pwms = <&ecap2 0 50000 0>;
|
|
brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
|
|
default-brightness-level = <7>;
|
|
};
|
|
|
|
panel {
|
|
compatible = "ti,tilcdc,panel";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_pins>;
|
|
/*
|
|
* The vpif and the LCD are mutually exclusive.
|
|
* To enable VPIF, change the status below to 'disabled' then
|
|
* then change the status of the vpif below to 'okay'
|
|
*/
|
|
status = "okay";
|
|
enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
|
|
|
|
panel-info {
|
|
ac-bias = <255>;
|
|
ac-bias-intrpt = <0>;
|
|
dma-burst-sz = <16>;
|
|
bpp = <16>;
|
|
fdd = <0x80>;
|
|
sync-edge = <0>;
|
|
sync-ctrl = <1>;
|
|
raster-order = <0>;
|
|
fifo-th = <0>;
|
|
};
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
timing0: 480x272 {
|
|
clock-frequency = <9000000>;
|
|
hactive = <480>;
|
|
vactive = <272>;
|
|
hfront-porch = <3>;
|
|
hback-porch = <2>;
|
|
hsync-len = <42>;
|
|
vback-porch = <3>;
|
|
vfront-porch = <4>;
|
|
vsync-len = <11>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <1>;
|
|
pixelclk-active = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vbat: fixedregulator0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbat";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
baseboard_3v3: fixedregulator-3v3 {
|
|
/* TPS73701DCQ */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "baseboard_3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vbat>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
baseboard_1v8: fixedregulator-1v8 {
|
|
/* TPS73701DCQ */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "baseboard_1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vbat>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
backlight_lcd: backlight-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "lcd_backlight_pwr";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
|
|
enable-active-high;
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "DA850-OMAPL138 EVM";
|
|
simple-audio-card,widgets =
|
|
"Line", "Line In",
|
|
"Line", "Line Out";
|
|
simple-audio-card,routing =
|
|
"LINE1L", "Line In",
|
|
"LINE1R", "Line In",
|
|
"Line Out", "LLOUT",
|
|
"Line Out", "RLOUT";
|
|
simple-audio-card,format = "dsp_b";
|
|
simple-audio-card,bitclock-master = <&link0_codec>;
|
|
simple-audio-card,frame-master = <&link0_codec>;
|
|
simple-audio-card,bitclock-inversion;
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&mcasp0>;
|
|
system-clock-frequency = <24576000>;
|
|
};
|
|
|
|
link0_codec: simple-audio-card,codec {
|
|
sound-dai = <&tlv320aic3106>;
|
|
system-clock-frequency = <24576000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ecap2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ref_clk {
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
&pmx_core {
|
|
status = "okay";
|
|
|
|
mcasp0_pins: pinmux_mcasp0_pins {
|
|
pinctrl-single,bits = <
|
|
/*
|
|
* AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
|
|
* AFSR, AMUTE
|
|
*/
|
|
0x00 0x11111111 0xffffffff
|
|
/* AXR11, AXR12 */
|
|
0x04 0x00011000 0x000ff000
|
|
>;
|
|
};
|
|
nand_pins: nand_pins {
|
|
pinctrl-single,bits = <
|
|
/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
|
|
0x1c 0x10110110 0xf0ff0ff0
|
|
/*
|
|
* EMA_D[0], EMA_D[1], EMA_D[2],
|
|
* EMA_D[3], EMA_D[4], EMA_D[5],
|
|
* EMA_D[6], EMA_D[7]
|
|
*/
|
|
0x24 0x11111111 0xffffffff
|
|
/* EMA_A[1], EMA_A[2] */
|
|
0x30 0x01100000 0x0ff00000
|
|
>;
|
|
};
|
|
};
|
|
|
|
&sata {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rtc0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&lcdc {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
|
|
tps: tps@48 {
|
|
reg = <0x48>;
|
|
};
|
|
tlv320aic3106: tlv320aic3106@18 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "ti,tlv320aic3106";
|
|
reg = <0x18>;
|
|
status = "okay";
|
|
|
|
/* Regulators */
|
|
IOVDD-supply = <&vdcdc2_reg>;
|
|
AVDD-supply = <&baseboard_3v3>;
|
|
DRVDD-supply = <&baseboard_3v3>;
|
|
DVDD-supply = <&baseboard_1v8>;
|
|
};
|
|
tca6416: gpio@20 {
|
|
compatible = "ti,tca6416";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
tca6416_bb: gpio@21 {
|
|
compatible = "ti,tca6416";
|
|
reg = <0x21>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&wdt {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
max-frequency = <50000000>;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins>;
|
|
cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio 65 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&spi1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
|
|
flash: flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "m25p64";
|
|
spi-max-frequency = <30000000>;
|
|
m25p,fast-read;
|
|
reg = <0>;
|
|
partition@0 {
|
|
label = "U-Boot-SPL";
|
|
reg = <0x00000000 0x00010000>;
|
|
read-only;
|
|
};
|
|
partition@1 {
|
|
label = "U-Boot";
|
|
reg = <0x00010000 0x00080000>;
|
|
read-only;
|
|
};
|
|
partition@2 {
|
|
label = "U-Boot-Env";
|
|
reg = <0x00090000 0x00010000>;
|
|
read-only;
|
|
};
|
|
partition@3 {
|
|
label = "Kernel";
|
|
reg = <0x000a0000 0x00280000>;
|
|
};
|
|
partition@4 {
|
|
label = "Filesystem";
|
|
reg = <0x00320000 0x00400000>;
|
|
};
|
|
partition@5 {
|
|
label = "MAC-Address";
|
|
reg = <0x007f0000 0x00010000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mdio_pins>;
|
|
bus_freq = <2200000>;
|
|
};
|
|
|
|
ð0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mii_pins>;
|
|
};
|
|
|
|
&gpio {
|
|
status = "okay";
|
|
};
|
|
|
|
/include/ "tps6507x.dtsi"
|
|
|
|
&tps {
|
|
vdcdc1_2-supply = <&vbat>;
|
|
vdcdc3-supply = <&vbat>;
|
|
vldo1_2-supply = <&vbat>;
|
|
|
|
regulators {
|
|
vdcdc1_reg: regulator@0 {
|
|
regulator-name = "VDCDC1_3.3V";
|
|
regulator-min-microvolt = <3150000>;
|
|
regulator-max-microvolt = <3450000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdcdc2_reg: regulator@1 {
|
|
regulator-name = "VDCDC2_3.3V";
|
|
regulator-min-microvolt = <1710000>;
|
|
regulator-max-microvolt = <3450000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
ti,defdcdc_default = <1>;
|
|
};
|
|
|
|
vdcdc3_reg: regulator@2 {
|
|
regulator-name = "VDCDC3_1.2V";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
ti,defdcdc_default = <1>;
|
|
};
|
|
|
|
ldo1_reg: regulator@3 {
|
|
regulator-name = "LDO1_1.8V";
|
|
regulator-min-microvolt = <1710000>;
|
|
regulator-max-microvolt = <1890000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo2_reg: regulator@4 {
|
|
regulator-name = "LDO2_1.2V";
|
|
regulator-min-microvolt = <1140000>;
|
|
regulator-max-microvolt = <1320000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mcasp0 {
|
|
#sound-dai-cells = <0>;
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcasp0_pins>;
|
|
|
|
op-mode = <0>; /* MCASP_IIS_MODE */
|
|
tdm-slots = <2>;
|
|
/* 4 serializer */
|
|
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
|
|
0 0 0 0
|
|
0 0 0 0
|
|
0 0 0 1
|
|
2 0 0 0
|
|
>;
|
|
tx-num-evt = <32>;
|
|
rx-num-evt = <32>;
|
|
};
|
|
|
|
&edma0 {
|
|
ti,edma-reserved-slot-ranges = <32 50>;
|
|
};
|
|
|
|
&edma1 {
|
|
ti,edma-reserved-slot-ranges = <32 90>;
|
|
};
|
|
|
|
&aemif {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nand_pins>;
|
|
status = "okay";
|
|
cs3 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
clock-ranges;
|
|
ranges;
|
|
|
|
ti,cs-chipselect = <3>;
|
|
|
|
nand@2000000,0 {
|
|
compatible = "ti,davinci-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0 0x02000000 0x02000000
|
|
1 0x00000000 0x00008000>;
|
|
|
|
ti,davinci-chipselect = <1>;
|
|
ti,davinci-mask-ale = <0>;
|
|
ti,davinci-mask-cle = <0>;
|
|
ti,davinci-mask-chipsel = <0>;
|
|
ti,davinci-ecc-mode = "hw";
|
|
ti,davinci-ecc-bits = <4>;
|
|
ti,davinci-nand-use-bbt;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&vpif {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
|
|
/*
|
|
* The vpif and the LCD are mutually exclusive.
|
|
* To enable VPIF, disable the ti,tilcdc,panel then
|
|
* change the status below to 'okay'
|
|
*/
|
|
status = "disabled";
|
|
};
|