mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 03:03:05 +00:00
b2d7619e46
There is a bug in Turris Omnia's schematics, whereupon the MPP[26] pin, which is routed to CN11 pin header, is documented as SPI CS1, but MPP[26] pin does not support this function. Instead it controls chip select 2 if in "spi0" mode. Fix the name of the pin node in pinctrl node and fix the comment in SPI node. Signed-off-by: Marek Behún <kabel@kernel.org>
541 lines
9.9 KiB
Text
541 lines
9.9 KiB
Text
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Device Tree file for the Turris Omnia
|
|
*
|
|
* Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
|
|
* Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
|
|
*
|
|
* Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include "armada-385.dtsi"
|
|
|
|
/ {
|
|
model = "Turris Omnia";
|
|
compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
|
|
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
aliases {
|
|
ethernet0 = ð0;
|
|
ethernet1 = ð1;
|
|
ethernet2 = ð2;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x40000000>; /* 1024 MB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
|
|
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
|
|
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
|
|
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
|
|
|
|
internal-regs {
|
|
|
|
/* USB part of the PCIe2/USB 2.0 port */
|
|
usb@58000 {
|
|
status = "okay";
|
|
};
|
|
|
|
sata@a8000 {
|
|
status = "okay";
|
|
};
|
|
|
|
sdhci@d8000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhci_pins>;
|
|
status = "okay";
|
|
|
|
bus-width = <8>;
|
|
no-1-8-v;
|
|
non-removable;
|
|
};
|
|
|
|
usb3@f0000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb3@f8000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
pcie {
|
|
status = "okay";
|
|
|
|
pcie@1,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
slot-power-limit-milliwatt = <10000>;
|
|
};
|
|
|
|
pcie@2,0 {
|
|
/* Port 1, Lane 0 */
|
|
status = "okay";
|
|
slot-power-limit-milliwatt = <10000>;
|
|
};
|
|
|
|
pcie@3,0 {
|
|
/* Port 2, Lane 0 */
|
|
status = "okay";
|
|
slot-power-limit-milliwatt = <10000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sfp: sfp {
|
|
compatible = "sff,sfp";
|
|
i2c-bus = <&sfp_i2c>;
|
|
tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
|
|
rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
|
|
los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
|
|
mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
|
|
maximum-power-milliwatt = <3000>;
|
|
|
|
/*
|
|
* For now this has to be enabled at boot time by U-Boot when
|
|
* a SFP module is present. Read more in the comment in the
|
|
* eth2 node below.
|
|
*/
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&bm {
|
|
status = "okay";
|
|
};
|
|
|
|
&bm_bppi {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Connected to 88E6176 switch, port 6 */
|
|
ð0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ge0_rgmii_pins>;
|
|
status = "okay";
|
|
phy-mode = "rgmii";
|
|
buffer-manager = <&bm>;
|
|
bm,pool-long = <0>;
|
|
bm,pool-short = <3>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
/* Connected to 88E6176 switch, port 5 */
|
|
ð1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ge1_rgmii_pins>;
|
|
status = "okay";
|
|
phy-mode = "rgmii";
|
|
buffer-manager = <&bm>;
|
|
bm,pool-long = <1>;
|
|
bm,pool-short = <3>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
/* WAN port */
|
|
ð2 {
|
|
/*
|
|
* eth2 is connected via a multiplexor to both the SFP cage and to
|
|
* ethernet-phy@1. The multiplexor switches the signal to SFP cage when
|
|
* a SFP module is present, as determined by the mode-def0 GPIO.
|
|
*
|
|
* Until kernel supports this configuration properly, in case SFP module
|
|
* is present, U-Boot has to enable the sfp node above, remove phy
|
|
* handle and add managed = "in-band-status" property.
|
|
*/
|
|
status = "okay";
|
|
phy-mode = "sgmii";
|
|
phy-handle = <&phy1>;
|
|
phys = <&comphy5 2>;
|
|
sfp = <&sfp>;
|
|
buffer-manager = <&bm>;
|
|
bm,pool-long = <2>;
|
|
bm,pool-short = <3>;
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "okay";
|
|
|
|
i2cmux@70 {
|
|
compatible = "nxp,pca9547";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x70>;
|
|
|
|
i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
/* MCU command i2c API */
|
|
mcu: mcu@2a {
|
|
compatible = "cznic,turris-omnia-mcu";
|
|
reg = <0x2a>;
|
|
gpio-controller;
|
|
#gpio-cells = <3>;
|
|
};
|
|
|
|
led-controller@2b {
|
|
compatible = "cznic,turris-omnia-leds";
|
|
reg = <0x2b>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
/*
|
|
* LEDs are controlled by MCU (STM32F0) at
|
|
* address 0x2b.
|
|
*
|
|
* LED functions are not stable yet:
|
|
* - there are 3 LEDs connected via MCU to PCIe
|
|
* ports. One of these ports supports mSATA.
|
|
* There is no mSATA nor PCIe function.
|
|
* For now we use LED_FUNCTION_WLAN, since
|
|
* in most cases users have wifi cards in
|
|
* these slots
|
|
* - there are 2 LEDs dedicated for user: A and
|
|
* B. Again there is no such function defined.
|
|
* For now we use LED_FUNCTION_INDICATOR
|
|
*/
|
|
|
|
multi-led@0 {
|
|
reg = <0x0>;
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
function-enumerator = <2>;
|
|
};
|
|
|
|
multi-led@1 {
|
|
reg = <0x1>;
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
function-enumerator = <1>;
|
|
};
|
|
|
|
multi-led@2 {
|
|
reg = <0x2>;
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_WLAN;
|
|
function-enumerator = <3>;
|
|
};
|
|
|
|
multi-led@3 {
|
|
reg = <0x3>;
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_WLAN;
|
|
function-enumerator = <2>;
|
|
};
|
|
|
|
multi-led@4 {
|
|
reg = <0x4>;
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_WLAN;
|
|
function-enumerator = <1>;
|
|
};
|
|
|
|
multi-led@5 {
|
|
reg = <0x5>;
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_WAN;
|
|
};
|
|
|
|
multi-led@6 {
|
|
reg = <0x6>;
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_LAN;
|
|
function-enumerator = <4>;
|
|
};
|
|
|
|
multi-led@7 {
|
|
reg = <0x7>;
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_LAN;
|
|
function-enumerator = <3>;
|
|
};
|
|
|
|
multi-led@8 {
|
|
reg = <0x8>;
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_LAN;
|
|
function-enumerator = <2>;
|
|
};
|
|
|
|
multi-led@9 {
|
|
reg = <0x9>;
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_LAN;
|
|
function-enumerator = <1>;
|
|
};
|
|
|
|
multi-led@a {
|
|
reg = <0xa>;
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_LAN;
|
|
function-enumerator = <0>;
|
|
};
|
|
|
|
multi-led@b {
|
|
reg = <0xb>;
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_POWER;
|
|
};
|
|
};
|
|
|
|
eeprom@54 {
|
|
compatible = "atmel,24c64";
|
|
reg = <0x54>;
|
|
|
|
/* The EEPROM contains data for bootloader.
|
|
* Contents:
|
|
* struct omnia_eeprom {
|
|
* u32 magic; (=0x0341a034 in LE)
|
|
* u32 ramsize; (in GiB)
|
|
* char regdomain[4];
|
|
* u32 crc32;
|
|
* };
|
|
*/
|
|
};
|
|
};
|
|
|
|
i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
/* routed to PCIe0/mSATA connector (CN7A) */
|
|
};
|
|
|
|
i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
|
|
/* routed to PCIe1/USB2 connector (CN61A) */
|
|
};
|
|
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
|
|
/* routed to PCIe2 connector (CN62A) */
|
|
};
|
|
|
|
sfp_i2c: i2c@4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
|
|
/* routed to SFP+ */
|
|
};
|
|
|
|
i2c@5 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <5>;
|
|
|
|
/* ATSHA204A-MAHDA-T crypto module */
|
|
crypto@64 {
|
|
compatible = "atmel,atsha204a";
|
|
reg = <0x64>;
|
|
};
|
|
};
|
|
|
|
i2c@6 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <6>;
|
|
|
|
/* exposed on pin header */
|
|
};
|
|
|
|
i2c@7 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <7>;
|
|
|
|
pcawan: gpio@71 {
|
|
/*
|
|
* GPIO expander for SFP+ signals and
|
|
* and phy irq
|
|
*/
|
|
compatible = "nxp,pca9538";
|
|
reg = <0x71>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcawan_pins>;
|
|
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mdio_pins>;
|
|
status = "okay";
|
|
|
|
phy1: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
marvell,reg-init = <3 18 0 0x4985>,
|
|
<3 16 0xfff0 0x0001>;
|
|
|
|
/* irq is connected to &pcawan pin 7 */
|
|
};
|
|
|
|
/* Switch MV88E6176 at address 0x10 */
|
|
switch@10 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&swint_pins>;
|
|
compatible = "marvell,mv88e6085";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
dsa,member = <0 0>;
|
|
reg = <0x10>;
|
|
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ports@0 {
|
|
reg = <0>;
|
|
label = "lan0";
|
|
};
|
|
|
|
ports@1 {
|
|
reg = <1>;
|
|
label = "lan1";
|
|
};
|
|
|
|
ports@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
};
|
|
|
|
ports@3 {
|
|
reg = <3>;
|
|
label = "lan3";
|
|
};
|
|
|
|
ports@4 {
|
|
reg = <4>;
|
|
label = "lan4";
|
|
};
|
|
|
|
ports@5 {
|
|
reg = <5>;
|
|
label = "cpu";
|
|
ethernet = <ð1>;
|
|
phy-mode = "rgmii-id";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
/* port 6 is connected to eth0 */
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
pcawan_pins: pcawan-pins {
|
|
marvell,pins = "mpp46";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
swint_pins: swint-pins {
|
|
marvell,pins = "mpp45";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
spi0cs0_pins: spi0cs0-pins {
|
|
marvell,pins = "mpp25";
|
|
marvell,function = "spi0";
|
|
};
|
|
|
|
spi0cs2_pins: spi0cs2-pins {
|
|
marvell,pins = "mpp26";
|
|
marvell,function = "spi0";
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "spansion,s25fl164k", "jedec,spi-nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
spi-max-frequency = <40000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x00100000>;
|
|
label = "U-Boot";
|
|
};
|
|
|
|
partition@100000 {
|
|
reg = <0x00100000 0x00700000>;
|
|
label = "Rescue system";
|
|
};
|
|
};
|
|
};
|
|
|
|
/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
|
|
};
|
|
|
|
&uart0 {
|
|
/* Pin header CN10 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
/* Pin header CN11 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>;
|
|
status = "okay";
|
|
};
|