mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 02:20:25 +00:00
e895a4b06f
This function can fail if the device tree runs out of space. Rather than silently booting with an incomplete device tree, allow the failure to be detected. Unfortunately this involves changing a lot of places in the code. I have not changed behvaiour to return an error where one is not currently returned, to avoid unexpected breakage. Eventually it would be nice to allow boards to register functions to be called to update the device tree. This would avoid all the many functions to do this. However it's not clear yet if this should be done using driver model or with a linker list. This work is left for later. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
294 lines
6.3 KiB
C
294 lines
6.3 KiB
C
/*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <i2c.h>
|
|
#include <netdev.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/fsl_portals.h>
|
|
#include <asm/fsl_liodn.h>
|
|
#include <fm_eth.h>
|
|
#include <hwconfig.h>
|
|
#include <asm/mpc85xx_gpio.h>
|
|
|
|
#include "../common/qixis.h"
|
|
#include "t1040qds.h"
|
|
#include "t1040qds_qixis.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int checkboard(void)
|
|
{
|
|
char buf[64];
|
|
u8 sw;
|
|
struct cpu_type *cpu = gd->arch.cpu;
|
|
static const char *const freq[] = {"100", "125", "156.25", "161.13",
|
|
"122.88", "122.88", "122.88"};
|
|
int clock;
|
|
|
|
printf("Board: %sQDS, ", cpu->name);
|
|
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
|
|
QIXIS_READ(id), QIXIS_READ(arch));
|
|
|
|
sw = QIXIS_READ(brdcfg[0]);
|
|
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
|
|
|
|
if (sw < 0x8)
|
|
printf("vBank: %d\n", sw);
|
|
else if (sw == 0x8)
|
|
puts("PromJet\n");
|
|
else if (sw == 0x9)
|
|
puts("NAND\n");
|
|
else if (sw == 0x15)
|
|
printf("IFCCard\n");
|
|
else
|
|
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
|
|
|
|
printf("FPGA: v%d (%s), build %d",
|
|
(int)QIXIS_READ(scver), qixis_read_tag(buf),
|
|
(int)qixis_read_minor());
|
|
/* the timestamp string contains "\n" at the end */
|
|
printf(" on %s", qixis_read_time(buf));
|
|
|
|
/*
|
|
* Display the actual SERDES reference clocks as configured by the
|
|
* dip switches on the board. Note that the SWx registers could
|
|
* technically be set to force the reference clocks to match the
|
|
* values that the SERDES expects (or vice versa). For now, however,
|
|
* we just display both values and hope the user notices when they
|
|
* don't match.
|
|
*/
|
|
puts("SERDES Reference: ");
|
|
sw = QIXIS_READ(brdcfg[2]);
|
|
clock = (sw >> 6) & 3;
|
|
printf("Clock1=%sMHz ", freq[clock]);
|
|
clock = (sw >> 4) & 3;
|
|
printf("Clock2=%sMHz\n", freq[clock]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int select_i2c_ch_pca9547(u8 ch)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
|
|
if (ret) {
|
|
puts("PCA: failed to select proper channel\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qe_board_setup(void)
|
|
{
|
|
u8 brdcfg15, brdcfg9;
|
|
|
|
if (hwconfig("qe") && hwconfig("tdm")) {
|
|
brdcfg15 = QIXIS_READ(brdcfg[15]);
|
|
/*
|
|
* TDMRiser uses QE-TDM
|
|
* Route QE_TDM signals to TDM Riser slot
|
|
*/
|
|
QIXIS_WRITE(brdcfg[15], brdcfg15 | 7);
|
|
} else if (hwconfig("qe") && hwconfig("uart")) {
|
|
brdcfg15 = QIXIS_READ(brdcfg[15]);
|
|
brdcfg9 = QIXIS_READ(brdcfg[9]);
|
|
/*
|
|
* Route QE_TDM signals to UCC
|
|
* ProfiBus controlled by UCC3
|
|
*/
|
|
brdcfg15 &= 0xfc;
|
|
QIXIS_WRITE(brdcfg[15], brdcfg15 | 2);
|
|
QIXIS_WRITE(brdcfg[9], brdcfg9 | 4);
|
|
}
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
#ifdef CONFIG_SYS_FLASH_BASE
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
int flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash + PROMJET region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
if (flash_esel == -1) {
|
|
/* very unlikely unless something is messed up */
|
|
puts("Error: Could not find TLB for FLASH BASE\n");
|
|
flash_esel = 2; /* give our best effort to continue */
|
|
} else {
|
|
/* invalidate existing TLB entry for flash + promjet */
|
|
disable_tlb(flash_esel);
|
|
}
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
|
0, flash_esel, BOOKE_PAGESZ_256M, 1);
|
|
#endif
|
|
set_liodns();
|
|
#ifdef CONFIG_SYS_DPAA_QBMAN
|
|
setup_portals();
|
|
#endif
|
|
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned long get_board_sys_clk(void)
|
|
{
|
|
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
|
|
|
|
switch (sysclk_conf & 0x0F) {
|
|
case QIXIS_SYSCLK_64:
|
|
return 64000000;
|
|
case QIXIS_SYSCLK_83:
|
|
return 83333333;
|
|
case QIXIS_SYSCLK_100:
|
|
return 100000000;
|
|
case QIXIS_SYSCLK_125:
|
|
return 125000000;
|
|
case QIXIS_SYSCLK_133:
|
|
return 133333333;
|
|
case QIXIS_SYSCLK_150:
|
|
return 150000000;
|
|
case QIXIS_SYSCLK_160:
|
|
return 160000000;
|
|
case QIXIS_SYSCLK_166:
|
|
return 166666666;
|
|
}
|
|
return 66666666;
|
|
}
|
|
|
|
unsigned long get_board_ddr_clk(void)
|
|
{
|
|
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
|
|
|
|
switch ((ddrclk_conf & 0x30) >> 4) {
|
|
case QIXIS_DDRCLK_100:
|
|
return 100000000;
|
|
case QIXIS_DDRCLK_125:
|
|
return 125000000;
|
|
case QIXIS_DDRCLK_133:
|
|
return 133333333;
|
|
}
|
|
return 66666666;
|
|
}
|
|
|
|
#define NUM_SRDS_BANKS 2
|
|
int misc_init_r(void)
|
|
{
|
|
u8 sw;
|
|
serdes_corenet_t *srds_regs =
|
|
(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
|
|
u32 actual[NUM_SRDS_BANKS] = { 0 };
|
|
int i;
|
|
|
|
sw = QIXIS_READ(brdcfg[2]);
|
|
for (i = 0; i < NUM_SRDS_BANKS; i++) {
|
|
unsigned int clock = (sw >> (6 - 2 * i)) & 3;
|
|
switch (clock) {
|
|
case 0:
|
|
actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
|
|
break;
|
|
case 1:
|
|
actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
|
|
break;
|
|
case 2:
|
|
actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
|
|
break;
|
|
}
|
|
}
|
|
|
|
puts("SerDes1");
|
|
for (i = 0; i < NUM_SRDS_BANKS; i++) {
|
|
u32 pllcr0 = srds_regs->bank[i].pllcr0;
|
|
u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
|
|
if (expected != actual[i]) {
|
|
printf("expects ref clk%d %sMHz, but actual is %sMHz\n",
|
|
i + 1, serdes_clock_to_string(expected),
|
|
serdes_clock_to_string(actual[i]));
|
|
}
|
|
}
|
|
|
|
qe_board_setup();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = getenv_bootm_low();
|
|
size = getenv_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#ifdef CONFIG_PCI
|
|
pci_of_setup(blob, bd);
|
|
#endif
|
|
|
|
fdt_fixup_liodn(blob);
|
|
|
|
#ifdef CONFIG_HAS_FSL_DR_USB
|
|
fdt_fixup_dr_usb(blob, bd);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
fdt_fixup_fman_ethernet(blob);
|
|
fdt_fixup_board_enet(blob);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
void qixis_dump_switch(void)
|
|
{
|
|
int i, nr_of_cfgsw;
|
|
|
|
QIXIS_WRITE(cms[0], 0x00);
|
|
nr_of_cfgsw = QIXIS_READ(cms[1]);
|
|
|
|
puts("DIP switch settings dump:\n");
|
|
for (i = 1; i <= nr_of_cfgsw; i++) {
|
|
QIXIS_WRITE(cms[0], i);
|
|
printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
|
|
}
|
|
}
|
|
|
|
int board_need_mem_reset(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
#ifdef CONFIG_DEEP_SLEEP
|
|
void board_mem_sleep_setup(void)
|
|
{
|
|
/* does not provide HW signals for power management */
|
|
QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2));
|
|
/* Disable MCKE isolation */
|
|
gpio_set_value(2, 0);
|
|
udelay(1);
|
|
}
|
|
#endif
|