u-boot/arch/arm/include/asm/armv7.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

161 lines
4.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
* Aneesh V <aneesh@ti.com>
*/
#ifndef ARMV7_H
#define ARMV7_H
/* Cortex-A9 revisions */
#define MIDR_CORTEX_A9_R0P1 0x410FC091
#define MIDR_CORTEX_A9_R1P2 0x411FC092
#define MIDR_CORTEX_A9_R1P3 0x411FC093
#define MIDR_CORTEX_A9_R2P10 0x412FC09A
/* Cortex-A15 revisions */
#define MIDR_CORTEX_A15_R0P0 0x410FC0F0
#define MIDR_CORTEX_A15_R2P2 0x412FC0F2
/* Cortex-A7 revisions */
#define MIDR_CORTEX_A7_R0P0 0x410FC070
#define MIDR_PRIMARY_PART_MASK 0xFF0FFFF0
/* ID_PFR1 feature fields */
#define CPUID_ARM_SEC_SHIFT 4
#define CPUID_ARM_SEC_MASK (0xF << CPUID_ARM_SEC_SHIFT)
#define CPUID_ARM_VIRT_SHIFT 12
#define CPUID_ARM_VIRT_MASK (0xF << CPUID_ARM_VIRT_SHIFT)
#define CPUID_ARM_GENTIMER_SHIFT 16
#define CPUID_ARM_GENTIMER_MASK (0xF << CPUID_ARM_GENTIMER_SHIFT)
/* valid bits in CBAR register / PERIPHBASE value */
#define CBAR_MASK 0xFFFF8000
/* CCSIDR */
#define CCSIDR_LINE_SIZE_OFFSET 0
#define CCSIDR_LINE_SIZE_MASK 0x7
#define CCSIDR_ASSOCIATIVITY_OFFSET 3
#define CCSIDR_ASSOCIATIVITY_MASK (0x3FF << 3)
#define CCSIDR_NUM_SETS_OFFSET 13
#define CCSIDR_NUM_SETS_MASK (0x7FFF << 13)
/*
* Values for InD field in CSSELR
* Selects the type of cache
*/
#define ARMV7_CSSELR_IND_DATA_UNIFIED 0
#define ARMV7_CSSELR_IND_INSTRUCTION 1
/* Values for Ctype fields in CLIDR */
#define ARMV7_CLIDR_CTYPE_NO_CACHE 0
#define ARMV7_CLIDR_CTYPE_INSTRUCTION_ONLY 1
#define ARMV7_CLIDR_CTYPE_DATA_ONLY 2
#define ARMV7_CLIDR_CTYPE_INSTRUCTION_DATA 3
#define ARMV7_CLIDR_CTYPE_UNIFIED 4
#ifndef __ASSEMBLY__
#include <linux/types.h>
#include <asm/io.h>
#include <asm/barriers.h>
/* read L2 control register (L2CTLR) */
static inline uint32_t read_l2ctlr(void)
{
uint32_t val = 0;
asm volatile ("mrc p15, 1, %0, c9, c0, 2" : "=r" (val));
return val;
}
/* write L2 control register (L2CTLR) */
static inline void write_l2ctlr(uint32_t val)
{
/*
* Note: L2CTLR can only be written when the L2 memory system
* is idle, ie before the MMU is enabled.
*/
asm volatile("mcr p15, 1, %0, c9, c0, 2" : : "r" (val) : "memory");
isb();
}
/*
* Workaround for ARM errata # 798870
* Set L2ACTLR[7] to reissue any memory transaction in the L2 that has been
* stalled for 1024 cycles to verify that its hazard condition still exists.
*/
static inline void v7_enable_l2_hazard_detect(void)
{
uint32_t val;
/* L2ACTLR[7]: Enable hazard detect timeout */
asm volatile ("mrc p15, 1, %0, c15, c0, 0\n\t" : "=r"(val));
val |= (1 << 7);
asm volatile ("mcr p15, 1, %0, c15, c0, 0\n\t" : : "r"(val));
}
/*
* Workaround for ARM errata # 799270
* Ensure that the L2 logic has been used within the previous 256 cycles
* before modifying the ACTLR.SMP bit. This is required during boot before
* MMU has been enabled, or during a specified reset or power down sequence.
*/
static inline void v7_enable_smp(uint32_t address)
{
uint32_t temp, val;
/* Read auxiliary control register */
asm volatile ("mrc p15, 0, %0, c1, c0, 1\n\t" : "=r"(val));
/* Enable SMP */
val |= (1 << 6);
/* Dummy read to assure L2 access */
temp = readl(address);
temp &= 0;
val |= temp;
/* Write auxiliary control register */
asm volatile ("mcr p15, 0, %0, c1, c0, 1\n\t" : : "r"(val));
CP15DSB;
CP15ISB;
}
void v7_en_l2_hazard_detect(void);
void v7_outer_cache_enable(void);
void v7_outer_cache_disable(void);
void v7_outer_cache_flush_all(void);
void v7_outer_cache_inval_all(void);
void v7_outer_cache_flush_range(u32 start, u32 end);
void v7_outer_cache_inval_range(u32 start, u32 end);
#ifdef CONFIG_ARMV7_NONSEC
int armv7_init_nonsec(void);
int armv7_apply_memory_carveout(u64 *start, u64 *size);
bool armv7_boot_nonsec(void);
/* defined in assembly file */
unsigned int _nonsec_init(void);
void _do_nonsec_entry(void *target_pc, unsigned long r0,
unsigned long r1, unsigned long r2);
void _smp_pen(void);
extern char __secure_start[];
extern char __secure_end[];
extern char __secure_stack_start[];
extern char __secure_stack_end[];
#endif /* CONFIG_ARMV7_NONSEC */
void v7_arch_cp15_set_l2aux_ctrl(u32 l2auxctrl, u32 cpu_midr,
u32 cpu_rev_comb, u32 cpu_variant,
u32 cpu_rev);
void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
u32 cpu_variant, u32 cpu_rev);
#endif /* ! __ASSEMBLY__ */
#endif