u-boot/arch/arm/dts/tegra30-asus-transformer.dtsi
Svyatoslav Ryhel e22d5799dc ARM: dts: tegra30: enable USB PHY node on some devices
Enable USB PHY nodes on ASUS Transformers, Grouper, Enadevoru
and LG X3. This is not mandatory since driver will use default
values but preferable for new devices.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-28 09:17:18 +02:00

234 lines
4.4 KiB
Text

// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
#include "tegra30.dtsi"
/ {
chosen {
stdout-path = &uarta;
};
aliases {
i2c0 = &pwr_i2c;
i2c1 = &gen1_i2c;
mmc0 = &sdmmc4; /* eMMC */
mmc1 = &sdmmc1; /* uSD slot */
rtc0 = &pmic;
rtc1 = "/rtc@7000e000";
usb0 = &usb1;
usb1 = &usb3; /* Dock USB */
};
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>;
};
host1x@50000000 {
dc@54200000 {
rgb {
status = "okay";
nvidia,panel = <&panel>;
};
};
};
uarta: serial@70006000 {
status = "okay";
};
pwm: pwm@7000a000 {
status = "okay";
};
gen1_i2c: i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
};
pwr_i2c: i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
/* Texas Instruments TPS659110 PMIC */
pmic: tps65911@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
#gpio-cells = <2>;
gpio-controller;
regulators {
vdd_1v8_vio: vddio {
regulator-name = "vdd_1v8_gen";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
/* eMMC VDD */
vcore_emmc: ldo1 {
regulator-name = "vdd_emmc_core";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
/* uSD slot VDD */
vdd_usd: ldo2 {
regulator-name = "vdd_usd";
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
regulator-boot-on;
};
/* uSD slot VDDIO */
vddio_usd: ldo3 {
regulator-name = "vddio_usd";
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
sdmmc1: sdhci@78000000 {
status = "okay";
bus-width = <4>;
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
vmmc-supply = <&vdd_usd>;
vqmmc-supply = <&vddio_usd>;
};
sdmmc4: sdhci@78000600 {
status = "okay";
bus-width = <8>;
non-removable;
vmmc-supply = <&vcore_emmc>;
vqmmc-supply = <&vdd_1v8_vio>;
};
/* USB via ASUS connector */
usb1: usb@7d000000 {
status = "okay";
dr_mode = "otg";
};
usb-phy@7d000000 {
status = "okay";
nvidia,hssync-start-delay = <0>;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
};
/* Dock's USB port */
usb3: usb@7d008000 {
status = "okay";
};
usb-phy@7d008000 {
status = "okay";
};
backlight: backlight {
compatible = "pwm-backlight";
enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
power-supply = <&vdd_5v0_bl>;
pwms = <&pwm 0 4000000>;
brightness-levels = <1 35 70 105 140 175 210 255>;
default-brightness-level = <5>;
};
/* PMIC has a built-in 32KHz oscillator which is used by PMC */
clk32k_in: clock-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "pmic-oscillator";
};
gpio-keys {
compatible = "gpio-keys";
key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_ENTER>;
};
key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
};
key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
};
};
panel: panel {
compatible = "simple-panel";
power-supply = <&vdd_pnl_reg>;
enable-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_HIGH>;
backlight = <&backlight>;
display-timings {
timing@0 {
/* 1280x800@60Hz */
clock-frequency = <68000000>;
hactive = <1280>;
hfront-porch = <48>;
hback-porch = <18>;
hsync-len = <30>;
vactive = <800>;
vfront-porch = <3>;
vback-porch = <12>;
vsync-len = <5>;
};
};
};
vdd_pnl_reg: regulator-pnl {
compatible = "regulator-fixed";
regulator-name = "vdd_panel";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vdd_5v0_bl: regulator-bl {
compatible = "regulator-fixed";
regulator-name = "vdd_5v0_bl";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};