u-boot/arch/arm/include/asm/mach-imx/sys_proto.h
Fabio Estevam e2162d709f imx: Remove boolean parameter from wdog powerdown function
imx_set_wdog_powerdown() is always used to disable the power down
enable bit, so remove the boolean parameter of the function.

It is also a bit strange to write a boolean value into registers,
so this new version makes explicit that we are writing 0.

While at it, rename it to imx_wdog_disable_powerdown().

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-27 10:34:49 +01:00

125 lines
3.2 KiB
C

/*
* (C) Copyright 2009
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
#include <asm/io.h>
#include <asm/mach-imx/regs-common.h>
#include <common.h>
#include "../arch-imx/cpu.h"
#define soc_rev() (get_cpu_rev() & 0xFF)
#define is_soc_rev(rev) (soc_rev() == rev)
/* returns MXC_CPU_ value */
#define cpu_type(rev) (((rev) >> 12) & 0xff)
#define soc_type(rev) (((rev) >> 12) & 0xf0)
/* both macros return/take MXC_CPU_ constants */
#define get_cpu_type() (cpu_type(get_cpu_rev()))
#define get_soc_type() (soc_type(get_cpu_rev()))
#define is_cpu_type(cpu) (get_cpu_type() == cpu)
#define is_soc_type(soc) (get_soc_type() == soc)
#define is_mx6() (is_soc_type(MXC_SOC_MX6))
#define is_mx7() (is_soc_type(MXC_SOC_MX7))
#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP))
#define is_mx6dq() (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
#define is_mx6sdl() (is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6DL))
#define is_mx6dl() (is_cpu_type(MXC_CPU_MX6DL))
#define is_mx6sx() (is_cpu_type(MXC_CPU_MX6SX))
#define is_mx6sl() (is_cpu_type(MXC_CPU_MX6SL))
#define is_mx6solo() (is_cpu_type(MXC_CPU_MX6SOLO))
#define is_mx6ul() (is_cpu_type(MXC_CPU_MX6UL))
#define is_mx6ull() (is_cpu_type(MXC_CPU_MX6ULL))
#define is_mx6sll() (is_cpu_type(MXC_CPU_MX6SLL))
#define is_mx7ulp() (is_cpu_type(MXC_CPU_MX7ULP))
#ifdef CONFIG_MX6
#define IMX6_SRC_GPR10_BMODE BIT(28)
#define IMX6_BMODE_MASK GENMASK(7, 0)
#define IMX6_BMODE_SHIFT 4
#define IMX6_BMODE_EMI_MASK BIT(3)
#define IMX6_BMODE_EMI_SHIFT 3
#define IMX6_BMODE_SERIAL_ROM_MASK GENMASK(26, 24)
#define IMX6_BMODE_SERIAL_ROM_SHIFT 24
enum imx6_bmode_serial_rom {
IMX6_BMODE_ECSPI1,
IMX6_BMODE_ECSPI2,
IMX6_BMODE_ECSPI3,
IMX6_BMODE_ECSPI4,
IMX6_BMODE_ECSPI5,
IMX6_BMODE_I2C1,
IMX6_BMODE_I2C2,
IMX6_BMODE_I2C3,
};
enum imx6_bmode_emi {
IMX6_BMODE_ONENAND,
IMX6_BMODE_NOR,
};
enum imx6_bmode {
IMX6_BMODE_EMI,
#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
IMX6_BMODE_QSPI,
IMX6_BMODE_RESERVED,
#else
IMX6_BMODE_RESERVED,
IMX6_BMODE_SATA,
#endif
IMX6_BMODE_SERIAL_ROM,
IMX6_BMODE_SD,
IMX6_BMODE_ESD,
IMX6_BMODE_MMC,
IMX6_BMODE_EMMC,
IMX6_BMODE_NAND,
};
static inline u8 imx6_is_bmode_from_gpr9(void)
{
return readl(&src_base->gpr10) & IMX6_SRC_GPR10_BMODE;
}
u32 imx6_src_get_boot_mode(void);
void gpr_init(void);
#endif /* CONFIG_MX6 */
u32 get_nr_cpus(void);
u32 get_cpu_rev(void);
u32 get_cpu_speed_grade_hz(void);
u32 get_cpu_temp_grade(int *minc, int *maxc);
const char *get_imx_type(u32 imxtype);
u32 imx_ddr_size(void);
void sdelay(unsigned long);
void set_chipselect_size(int const);
void init_aips(void);
void init_src(void);
void imx_wdog_disable_powerdown(void);
int board_mmc_get_env_dev(int devno);
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
*/
int fecmxc_initialize(bd_t *bis);
u32 get_ahb_clk(void);
u32 get_periph_clk(void);
void lcdif_power_down(void);
int mxs_reset_block(struct mxs_register_32 *reg);
int mxs_wait_mask_set(struct mxs_register_32 *reg, u32 mask, u32 timeout);
int mxs_wait_mask_clr(struct mxs_register_32 *reg, u32 mask, u32 timeout);
#endif