mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
786 lines
21 KiB
C
786 lines
21 KiB
C
/*
|
|
* (C) Copyright 2002
|
|
* Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/cache.h>
|
|
|
|
#undef DEBUG_FLASH
|
|
/*
|
|
* This file implements a Common Flash Interface (CFI) driver for U-Boot.
|
|
* The width of the port and the width of the chips are determined at initialization.
|
|
* These widths are used to calculate the address for access CFI data structures.
|
|
* It has been tested on an Intel Strataflash implementation.
|
|
*
|
|
* References
|
|
* JEDEC Standard JESD68 - Common Flash Interface (CFI)
|
|
* JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
|
|
* Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
|
|
* Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
|
|
*
|
|
* TODO
|
|
* Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
|
|
* Add support for other command sets Use the PRI and ALT to determine command set
|
|
* Verify erase and program timeouts.
|
|
*/
|
|
|
|
#define FLASH_CMD_CFI 0x98
|
|
#define FLASH_CMD_READ_ID 0x90
|
|
#define FLASH_CMD_RESET 0xff
|
|
#define FLASH_CMD_BLOCK_ERASE 0x20
|
|
#define FLASH_CMD_ERASE_CONFIRM 0xD0
|
|
#define FLASH_CMD_WRITE 0x40
|
|
#define FLASH_CMD_PROTECT 0x60
|
|
#define FLASH_CMD_PROTECT_SET 0x01
|
|
#define FLASH_CMD_PROTECT_CLEAR 0xD0
|
|
#define FLASH_CMD_CLEAR_STATUS 0x50
|
|
#define FLASH_CMD_WRITE_TO_BUFFER 0xE8
|
|
#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0
|
|
|
|
#define FLASH_STATUS_DONE 0x80
|
|
#define FLASH_STATUS_ESS 0x40
|
|
#define FLASH_STATUS_ECLBS 0x20
|
|
#define FLASH_STATUS_PSLBS 0x10
|
|
#define FLASH_STATUS_VPENS 0x08
|
|
#define FLASH_STATUS_PSS 0x04
|
|
#define FLASH_STATUS_DPS 0x02
|
|
#define FLASH_STATUS_R 0x01
|
|
#define FLASH_STATUS_PROTECT 0x01
|
|
|
|
#define FLASH_OFFSET_CFI 0x55
|
|
#define FLASH_OFFSET_CFI_RESP 0x10
|
|
#define FLASH_OFFSET_WTOUT 0x1F
|
|
#define FLASH_OFFSET_WBTOUT 0x20
|
|
#define FLASH_OFFSET_ETOUT 0x21
|
|
#define FLASH_OFFSET_CETOUT 0x22
|
|
#define FLASH_OFFSET_WMAX_TOUT 0x23
|
|
#define FLASH_OFFSET_WBMAX_TOUT 0x24
|
|
#define FLASH_OFFSET_EMAX_TOUT 0x25
|
|
#define FLASH_OFFSET_CEMAX_TOUT 0x26
|
|
#define FLASH_OFFSET_SIZE 0x27
|
|
#define FLASH_OFFSET_INTERFACE 0x28
|
|
#define FLASH_OFFSET_BUFFER_SIZE 0x2A
|
|
#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C
|
|
#define FLASH_OFFSET_ERASE_REGIONS 0x2D
|
|
#define FLASH_OFFSET_PROTECT 0x02
|
|
#define FLASH_OFFSET_USER_PROTECTION 0x85
|
|
#define FLASH_OFFSET_INTEL_PROTECTION 0x81
|
|
|
|
#define FLASH_MAN_CFI 0x01000000
|
|
|
|
typedef union {
|
|
unsigned char c;
|
|
unsigned short w;
|
|
unsigned long l;
|
|
} cfiword_t;
|
|
|
|
typedef union {
|
|
unsigned char *cp;
|
|
unsigned short *wp;
|
|
unsigned long *lp;
|
|
} cfiptr_t;
|
|
|
|
#define NUM_ERASE_REGIONS 4
|
|
|
|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Functions
|
|
*/
|
|
|
|
static void flash_add_byte(flash_info_t * info, cfiword_t * cword, uchar c);
|
|
static void flash_make_cmd(flash_info_t * info, uchar cmd, void *cmdbuf);
|
|
static void flash_write_cmd(flash_info_t * info, int sect, uchar offset,
|
|
uchar cmd);
|
|
static int flash_isequal(flash_info_t * info, int sect, uchar offset,
|
|
uchar cmd);
|
|
static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
|
|
static int flash_detect_cfi(flash_info_t * info);
|
|
static ulong flash_get_size(ulong base, int banknum);
|
|
static int flash_write_cfiword(flash_info_t * info, ulong dest,
|
|
cfiword_t cword);
|
|
static int flash_full_status_check(flash_info_t * info, ulong sector,
|
|
ulong tout, char *prompt);
|
|
#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp,
|
|
int len);
|
|
#endif
|
|
/*-----------------------------------------------------------------------
|
|
* create an address based on the offset and the port width
|
|
*/
|
|
inline uchar *flash_make_addr(flash_info_t * info, int sect, int offset)
|
|
{
|
|
return ((uchar *) (info->start[sect] + (offset * info->portwidth)));
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* read a character at a port width address
|
|
*/
|
|
inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
|
|
{
|
|
uchar *cp;
|
|
cp = flash_make_addr(info, 0, offset);
|
|
return (cp[info->portwidth - 1]);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* read a short word by swapping for ppc format.
|
|
*/
|
|
ushort flash_read_ushort(flash_info_t * info, int sect, uchar offset)
|
|
{
|
|
uchar *addr;
|
|
|
|
addr = flash_make_addr(info, sect, offset);
|
|
return ((addr[(2 * info->portwidth) - 1] << 8) |
|
|
addr[info->portwidth - 1]);
|
|
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* read a long word by picking the least significant byte of each maiximum
|
|
* port size word. Swap for ppc format.
|
|
*/
|
|
ulong flash_read_long(flash_info_t * info, int sect, uchar offset)
|
|
{
|
|
uchar *addr;
|
|
|
|
addr = flash_make_addr(info, sect, offset);
|
|
return ((addr[(2 * info->portwidth) - 1] << 24) |
|
|
(addr[(info->portwidth) - 1] << 16) |
|
|
(addr[(4 * info->portwidth) - 1] << 8) |
|
|
addr[(3 * info->portwidth) - 1]);
|
|
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
unsigned long flash_init(void)
|
|
{
|
|
unsigned long size;
|
|
int i;
|
|
unsigned long address;
|
|
|
|
/* The flash is positioned back to back, with the demultiplexing of the chip
|
|
* based on the A24 address line.
|
|
*
|
|
*/
|
|
|
|
address = CONFIG_SYS_FLASH_BASE;
|
|
size = 0;
|
|
|
|
/* Init: no FLASHes known */
|
|
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
|
|
flash_info[i].flash_id = FLASH_UNKNOWN;
|
|
size += flash_info[i].size = flash_get_size(address, i);
|
|
address += CONFIG_SYS_FLASH_INCREMENT;
|
|
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
|
|
printf
|
|
("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
|
|
i, flash_info[0].size, flash_info[i].size << 20);
|
|
}
|
|
}
|
|
|
|
#if 0 /* test-only */
|
|
/* Monitor protection ON by default */
|
|
#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
|
|
for (i = 0;
|
|
flash_info[0].start[i] < CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1;
|
|
i++)
|
|
(void)flash_real_protect(&flash_info[0], i, 1);
|
|
#endif
|
|
#endif
|
|
|
|
return (size);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
int flash_erase(flash_info_t * info, int s_first, int s_last)
|
|
{
|
|
int rcode = 0;
|
|
int prot;
|
|
int sect;
|
|
|
|
if (info->flash_id != FLASH_MAN_CFI) {
|
|
printf("Can't erase unknown flash type - aborted\n");
|
|
return 1;
|
|
}
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
printf("- no sectors to erase\n");
|
|
return 1;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect = s_first; sect <= s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
if (prot) {
|
|
printf("- Warning: %d protected sectors will not be erased!\n",
|
|
prot);
|
|
} else {
|
|
printf("\n");
|
|
}
|
|
|
|
for (sect = s_first; sect <= s_last; sect++) {
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
|
|
flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
|
|
flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
|
|
|
|
if (flash_full_status_check
|
|
(info, sect, info->erase_blk_tout, "erase")) {
|
|
rcode = 1;
|
|
} else
|
|
printf(".");
|
|
}
|
|
}
|
|
printf(" done\n");
|
|
return rcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
void flash_print_info(flash_info_t * info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id != FLASH_MAN_CFI) {
|
|
printf("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
printf("CFI conformant FLASH (%d x %d)",
|
|
(info->portwidth << 3), (info->chipwidth << 3));
|
|
printf(" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
printf
|
|
(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
|
|
info->erase_blk_tout, info->write_tout, info->buffer_write_tout,
|
|
info->buffer_size);
|
|
|
|
printf(" Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; ++i) {
|
|
if ((i % 5) == 0)
|
|
printf("\n");
|
|
printf(" %08lX%5s",
|
|
info->start[i], info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
printf("\n");
|
|
return;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
ulong wp;
|
|
ulong cp;
|
|
int aln;
|
|
cfiword_t cword;
|
|
int i, rc;
|
|
|
|
/* get lower aligned address */
|
|
wp = (addr & ~(info->portwidth - 1));
|
|
|
|
/* handle unaligned start */
|
|
if ((aln = addr - wp) != 0) {
|
|
cword.l = 0;
|
|
cp = wp;
|
|
for (i = 0; i < aln; ++i, ++cp)
|
|
flash_add_byte(info, &cword, (*(uchar *) cp));
|
|
|
|
for (; (i < info->portwidth) && (cnt > 0); i++) {
|
|
flash_add_byte(info, &cword, *src++);
|
|
cnt--;
|
|
cp++;
|
|
}
|
|
for (; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
|
|
flash_add_byte(info, &cword, (*(uchar *) cp));
|
|
if ((rc = flash_write_cfiword(info, wp, cword)) != 0)
|
|
return rc;
|
|
wp = cp;
|
|
}
|
|
#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
while (cnt >= info->portwidth) {
|
|
i = info->buffer_size > cnt ? cnt : info->buffer_size;
|
|
if ((rc = flash_write_cfibuffer(info, wp, src, i)) != ERR_OK)
|
|
return rc;
|
|
wp += i;
|
|
src += i;
|
|
cnt -= i;
|
|
}
|
|
#else
|
|
/* handle the aligned part */
|
|
while (cnt >= info->portwidth) {
|
|
cword.l = 0;
|
|
for (i = 0; i < info->portwidth; i++) {
|
|
flash_add_byte(info, &cword, *src++);
|
|
}
|
|
if ((rc = flash_write_cfiword(info, wp, cword)) != 0)
|
|
return rc;
|
|
wp += info->portwidth;
|
|
cnt -= info->portwidth;
|
|
}
|
|
#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
|
|
if (cnt == 0) {
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* handle unaligned tail bytes
|
|
*/
|
|
cword.l = 0;
|
|
for (i = 0, cp = wp; (i < info->portwidth) && (cnt > 0); ++i, ++cp) {
|
|
flash_add_byte(info, &cword, *src++);
|
|
--cnt;
|
|
}
|
|
for (; i < info->portwidth; ++i, ++cp) {
|
|
flash_add_byte(info, &cword, (*(uchar *) cp));
|
|
}
|
|
|
|
return flash_write_cfiword(info, wp, cword);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
int flash_real_protect(flash_info_t * info, long sector, int prot)
|
|
{
|
|
int retcode = 0;
|
|
|
|
flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
|
|
flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
|
|
if (prot)
|
|
flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
|
|
else
|
|
flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
|
|
|
|
if ((retcode =
|
|
flash_full_status_check(info, sector, info->erase_blk_tout,
|
|
prot ? "protect" : "unprotect")) == 0) {
|
|
|
|
info->protect[sector] = prot;
|
|
/* Intel's unprotect unprotects all locking */
|
|
if (prot == 0) {
|
|
int i;
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
if (info->protect[i])
|
|
flash_real_protect(info, i, 1);
|
|
}
|
|
}
|
|
}
|
|
|
|
return retcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* wait for XSR.7 to be set. Time out with an error if it does not.
|
|
* This routine does not set the flash to read-array mode.
|
|
*/
|
|
static int flash_status_check(flash_info_t * info, ulong sector, ulong tout,
|
|
char *prompt)
|
|
{
|
|
ulong start;
|
|
|
|
/* Wait for command completion */
|
|
start = get_timer(0);
|
|
while (!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
|
|
if (get_timer(start) > info->erase_blk_tout) {
|
|
printf("Flash %s timeout at address %lx\n", prompt,
|
|
info->start[sector]);
|
|
flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
|
|
return ERR_TIMOUT;
|
|
}
|
|
}
|
|
return ERR_OK;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
|
|
* This routine sets the flash to read-array mode.
|
|
*/
|
|
static int flash_full_status_check(flash_info_t * info, ulong sector,
|
|
ulong tout, char *prompt)
|
|
{
|
|
int retcode;
|
|
retcode = flash_status_check(info, sector, tout, prompt);
|
|
if ((retcode == ERR_OK)
|
|
&& !flash_isequal(info, sector, 0, FLASH_STATUS_DONE)) {
|
|
retcode = ERR_INVAL;
|
|
printf("Flash %s error at address %lx\n", prompt,
|
|
info->start[sector]);
|
|
if (flash_isset
|
|
(info, sector, 0,
|
|
FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)) {
|
|
printf("Command Sequence Error.\n");
|
|
} else if (flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)) {
|
|
printf("Block Erase Error.\n");
|
|
retcode = ERR_NOT_ERASED;
|
|
} else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
|
|
printf("Locking Error\n");
|
|
}
|
|
if (flash_isset(info, sector, 0, FLASH_STATUS_DPS)) {
|
|
printf("Block locked.\n");
|
|
retcode = ERR_PROTECTED;
|
|
}
|
|
if (flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
|
|
printf("Vpp Low Error.\n");
|
|
}
|
|
flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
|
|
return retcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static void flash_add_byte(flash_info_t * info, cfiword_t * cword, uchar c)
|
|
{
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
cword->c = c;
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
cword->w = (cword->w << 8) | c;
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
cword->l = (cword->l << 8) | c;
|
|
}
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* make a proper sized command based on the port and chip widths
|
|
*/
|
|
static void flash_make_cmd(flash_info_t * info, uchar cmd, void *cmdbuf)
|
|
{
|
|
int i;
|
|
uchar *cp = (uchar *) cmdbuf;
|
|
for (i = 0; i < info->portwidth; i++)
|
|
*cp++ = ((i + 1) % info->chipwidth) ? '\0' : cmd;
|
|
}
|
|
|
|
/*
|
|
* Write a proper sized command to the correct address
|
|
*/
|
|
static void flash_write_cmd(flash_info_t * info, int sect, uchar offset,
|
|
uchar cmd)
|
|
{
|
|
|
|
volatile cfiptr_t addr;
|
|
cfiword_t cword;
|
|
addr.cp = flash_make_addr(info, sect, offset);
|
|
flash_make_cmd(info, cmd, &cword);
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
*addr.cp = cword.c;
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
*addr.wp = cword.w;
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
*addr.lp = cword.l;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
|
|
{
|
|
cfiptr_t cptr;
|
|
cfiword_t cword;
|
|
int retval;
|
|
cptr.cp = flash_make_addr(info, sect, offset);
|
|
flash_make_cmd(info, cmd, &cword);
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
retval = (cptr.cp[0] == cword.c);
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
retval = (cptr.wp[0] == cword.w);
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
retval = (cptr.lp[0] == cword.l);
|
|
break;
|
|
default:
|
|
retval = 0;
|
|
break;
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
|
|
{
|
|
cfiptr_t cptr;
|
|
cfiword_t cword;
|
|
int retval;
|
|
cptr.cp = flash_make_addr(info, sect, offset);
|
|
flash_make_cmd(info, cmd, &cword);
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
retval = ((cptr.cp[0] & cword.c) == cword.c);
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
retval = ((cptr.wp[0] & cword.w) == cword.w);
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
retval = ((cptr.lp[0] & cword.l) == cword.l);
|
|
break;
|
|
default:
|
|
retval = 0;
|
|
break;
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* detect if flash is compatible with the Common Flash Interface (CFI)
|
|
* http://www.jedec.org/download/search/jesd68.pdf
|
|
*
|
|
*/
|
|
static int flash_detect_cfi(flash_info_t * info)
|
|
{
|
|
|
|
for (info->portwidth = FLASH_CFI_8BIT;
|
|
info->portwidth <= FLASH_CFI_32BIT; info->portwidth <<= 1) {
|
|
for (info->chipwidth = FLASH_CFI_BY8;
|
|
info->chipwidth <= info->portwidth;
|
|
info->chipwidth <<= 1) {
|
|
flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
|
|
flash_write_cmd(info, 0, FLASH_OFFSET_CFI,
|
|
FLASH_CMD_CFI);
|
|
if (flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
|
|
&& flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1,
|
|
'R')
|
|
&& flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2,
|
|
'Y'))
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The following code cannot be run from FLASH!
|
|
*
|
|
*/
|
|
static ulong flash_get_size(ulong base, int banknum)
|
|
{
|
|
flash_info_t *info = &flash_info[banknum];
|
|
int i, j;
|
|
int sect_cnt;
|
|
unsigned long sector;
|
|
unsigned long tmp;
|
|
int size_ratio = 0;
|
|
uchar num_erase_regions;
|
|
int erase_region_size;
|
|
int erase_region_count;
|
|
|
|
info->start[0] = base;
|
|
#if 0
|
|
invalidate_dcache_range(base, base + 0x400);
|
|
#endif
|
|
if (flash_detect_cfi(info)) {
|
|
|
|
size_ratio = info->portwidth / info->chipwidth;
|
|
num_erase_regions =
|
|
flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
|
|
|
|
sect_cnt = 0;
|
|
sector = base;
|
|
for (i = 0; i < num_erase_regions; i++) {
|
|
if (i > NUM_ERASE_REGIONS) {
|
|
printf("%d erase regions found, only %d used\n",
|
|
num_erase_regions, NUM_ERASE_REGIONS);
|
|
break;
|
|
}
|
|
tmp =
|
|
flash_read_long(info, 0,
|
|
FLASH_OFFSET_ERASE_REGIONS);
|
|
erase_region_size =
|
|
(tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128;
|
|
tmp >>= 16;
|
|
erase_region_count = (tmp & 0xffff) + 1;
|
|
for (j = 0; j < erase_region_count; j++) {
|
|
info->start[sect_cnt] = sector;
|
|
sector += (erase_region_size * size_ratio);
|
|
info->protect[sect_cnt] =
|
|
flash_isset(info, sect_cnt,
|
|
FLASH_OFFSET_PROTECT,
|
|
FLASH_STATUS_PROTECT);
|
|
sect_cnt++;
|
|
}
|
|
}
|
|
|
|
info->sector_count = sect_cnt;
|
|
/* multiply the size by the number of chips */
|
|
info->size =
|
|
(1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) *
|
|
size_ratio;
|
|
info->buffer_size =
|
|
(1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
|
|
tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
|
|
info->erase_blk_tout =
|
|
(tmp *
|
|
(1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
|
|
tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
|
|
info->buffer_write_tout =
|
|
(tmp *
|
|
(1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
|
|
tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
|
|
info->write_tout =
|
|
(tmp *
|
|
(1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT))) /
|
|
1000;
|
|
info->flash_id = FLASH_MAN_CFI;
|
|
}
|
|
|
|
flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
|
|
#ifdef DEBUG_FLASH
|
|
printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */
|
|
#endif
|
|
#ifdef DEBUG_FLASH
|
|
printf("found %d erase regions\n", num_erase_regions);
|
|
#endif
|
|
#ifdef DEBUG_FLASH
|
|
printf("size=%08x sectors=%08x \n", info->size, info->sector_count);
|
|
#endif
|
|
return (info->size);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static int flash_write_cfiword(flash_info_t * info, ulong dest, cfiword_t cword)
|
|
{
|
|
|
|
cfiptr_t cptr;
|
|
int flag;
|
|
|
|
cptr.cp = (uchar *)dest;
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
flag = ((cptr.cp[0] & cword.c) == cword.c);
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
flag = ((cptr.wp[0] & cword.w) == cword.w);
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
flag = ((cptr.lp[0] & cword.l) == cword.l);
|
|
break;
|
|
default:
|
|
return 2;
|
|
}
|
|
if (!flag)
|
|
return 2;
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
|
|
flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
|
|
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
cptr.cp[0] = cword.c;
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
cptr.wp[0] = cword.w;
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
cptr.lp[0] = cword.l;
|
|
break;
|
|
}
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
return flash_full_status_check(info, 0, info->write_tout, "write");
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
|
|
/* loop through the sectors from the highest address
|
|
* when the passed address is greater or equal to the sector address
|
|
* we have a match
|
|
*/
|
|
static int find_sector(flash_info_t * info, ulong addr)
|
|
{
|
|
int sector;
|
|
for (sector = info->sector_count - 1; sector >= 0; sector--) {
|
|
if (addr >= info->start[sector])
|
|
break;
|
|
}
|
|
return sector;
|
|
}
|
|
|
|
static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp,
|
|
int len)
|
|
{
|
|
|
|
int sector;
|
|
int cnt;
|
|
int retcode;
|
|
volatile cfiptr_t src;
|
|
volatile cfiptr_t dst;
|
|
|
|
src.cp = cp;
|
|
dst.cp = (uchar *) dest;
|
|
sector = find_sector(info, dest);
|
|
flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
|
|
flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
|
|
if ((retcode = flash_status_check(info, sector, info->buffer_write_tout,
|
|
"write to buffer")) == ERR_OK) {
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
cnt = len;
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
cnt = len >> 1;
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
cnt = len >> 2;
|
|
break;
|
|
default:
|
|
return ERR_INVAL;
|
|
break;
|
|
}
|
|
flash_write_cmd(info, sector, 0, (uchar) cnt - 1);
|
|
while (cnt-- > 0) {
|
|
switch (info->portwidth) {
|
|
case FLASH_CFI_8BIT:
|
|
*dst.cp++ = *src.cp++;
|
|
break;
|
|
case FLASH_CFI_16BIT:
|
|
*dst.wp++ = *src.wp++;
|
|
break;
|
|
case FLASH_CFI_32BIT:
|
|
*dst.lp++ = *src.lp++;
|
|
break;
|
|
default:
|
|
return ERR_INVAL;
|
|
break;
|
|
}
|
|
}
|
|
flash_write_cmd(info, sector, 0,
|
|
FLASH_CMD_WRITE_BUFFER_CONFIRM);
|
|
retcode =
|
|
flash_full_status_check(info, sector,
|
|
info->buffer_write_tout,
|
|
"buffer write");
|
|
}
|
|
flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
|
|
return retcode;
|
|
}
|
|
#endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */
|