mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
fecfe77c48
This syncs the devicetree files with the latest Linux kernel (5.19-rc2). This also fixes the currently broken ethernet support: Before: Net: Could not get PHY for FEC0: addr 0 After: Net: eth0: ethernet@30be0000 Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@denx.de>
299 lines
6.8 KiB
Text
299 lines
6.8 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ OR MIT
|
|
/*
|
|
* Copyright (C) 2019 Kontron Electronics GmbH
|
|
*/
|
|
|
|
#include "imx8mm.dtsi"
|
|
|
|
/ {
|
|
model = "Kontron i.MX8MM N801X SoM";
|
|
compatible = "kontron,imx8mm-n801x-som", "fsl,imx8mm";
|
|
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
/*
|
|
* There are multiple SoM flavors with different DDR sizes.
|
|
* The smallest is 1GB. For larger sizes the bootloader will
|
|
* update the reg property.
|
|
*/
|
|
reg = <0x0 0x40000000 0 0x80000000>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart3;
|
|
};
|
|
};
|
|
|
|
&A53_0 {
|
|
cpu-supply = <®_vdd_arm>;
|
|
};
|
|
|
|
&A53_1 {
|
|
cpu-supply = <®_vdd_arm>;
|
|
};
|
|
|
|
&A53_2 {
|
|
cpu-supply = <®_vdd_arm>;
|
|
};
|
|
|
|
&A53_3 {
|
|
cpu-supply = <®_vdd_arm>;
|
|
};
|
|
|
|
&ddrc {
|
|
operating-points-v2 = <&ddrc_opp_table>;
|
|
|
|
ddrc_opp_table: opp-table {
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-25M {
|
|
opp-hz = /bits/ 64 <25000000>;
|
|
};
|
|
|
|
opp-100M {
|
|
opp-hz = /bits/ 64 <100000000>;
|
|
};
|
|
|
|
opp-750M {
|
|
opp-hz = /bits/ 64 <750000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ecspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
|
|
spi-max-frequency = <80000000>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pca9450: pmic@25 {
|
|
compatible = "nxp,pca9450a";
|
|
reg = <0x25>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
|
|
|
regulators {
|
|
reg_vdd_soc: BUCK1 {
|
|
regulator-name = "buck1";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <3125>;
|
|
nxp,dvs-run-voltage = <850000>;
|
|
nxp,dvs-standby-voltage = <800000>;
|
|
};
|
|
|
|
reg_vdd_arm: BUCK2 {
|
|
regulator-name = "buck2";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <3125>;
|
|
nxp,dvs-run-voltage = <950000>;
|
|
nxp,dvs-standby-voltage = <850000>;
|
|
};
|
|
|
|
reg_vdd_dram: BUCK3 {
|
|
regulator-name = "buck3";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_vdd_3v3: BUCK4 {
|
|
regulator-name = "buck4";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_vdd_1v8: BUCK5 {
|
|
regulator-name = "buck5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_nvcc_dram: BUCK6 {
|
|
regulator-name = "buck6";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_nvcc_snvs: LDO1 {
|
|
regulator-name = "ldo1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_vdd_snvs: LDO2 {
|
|
regulator-name = "ldo2";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_vdda: LDO3 {
|
|
regulator-name = "ldo3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_vdd_phy: LDO4 {
|
|
regulator-name = "ldo4";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_nvcc_sd: LDO5 {
|
|
regulator-name = "ldo5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart3 { /* console */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
|
vmmc-supply = <®_vdd_3v3>;
|
|
vqmmc-supply = <®_vdd_1v8>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
|
|
MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
|
|
MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
|
|
MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
|
|
MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
|
|
>;
|
|
};
|
|
|
|
pinctrl_pmic: pmicgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141
|
|
MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x141
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
|
|
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
|
|
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
|
|
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
|
|
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
|
|
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
|
|
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
|
|
MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0
|
|
MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0
|
|
MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0
|
|
MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0
|
|
MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019
|
|
MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
|
|
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
|
|
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
|
|
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
|
|
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
|
|
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
|
|
MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4
|
|
MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4
|
|
MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4
|
|
MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4
|
|
MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019
|
|
MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
|
|
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
|
|
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
|
|
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
|
|
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
|
|
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
|
|
MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6
|
|
MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6
|
|
MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6
|
|
MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6
|
|
MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019
|
|
MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196
|
|
>;
|
|
};
|
|
|
|
pinctrl_wdog: wdoggrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
|
|
>;
|
|
};
|
|
};
|