Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-02 01:19:49 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/imx8mn-venice-gw7902.dts
Tim Harvey 53a2b6bd5d imx8m{m,n}-venice-gw7902: add support for GPY111 phy 
The TI DP83867 phy has been replaced with the MaxLinear GPY111 phy
due to part availability. Add support for it:
 - increase post-reset time to 300ms per datasheet
 - add tx-delay/rx-delay config

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:24 +02:00

899 lines
19 KiB
Text
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2022 Gateworks Corporation
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/net/ti-dp83867.h>
#include "imx8mn.dtsi"
/ {
model = "Gateworks Venice GW7902 i.MX8MN board";
compatible = "gw,imx8mn-gw7902", "fsl,imx8mn";
aliases {
usb0 = &usbotg1;
};
chosen {
stdout-path = &uart2;
};
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0 0x80000000>;
};
can20m: can20m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <20000000>;
clock-output-names = "can20m";
};
gpio-keys {
compatible = "gpio-keys";
user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
interrupts = <0>;
};
key-erased {
label = "key_erased";
linux,code = <BTN_2>;
interrupt-parent = <&gsc>;
interrupts = <1>;
};
eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
interrupts = <5>;
};
switch-hold {
label = "switch_hold";
linux,code = <BTN_5>;
interrupt-parent = <&gsc>;
interrupts = <7>;
};
};
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
label = "panel1";
gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
label = "panel2";
gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led-2 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
label = "panel3";
gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led-3 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
label = "panel4";
gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led-4 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
label = "panel5";
gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pps>;
gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
status = "okay";
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_usb1_vbus: regulator-usb1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb1>;
compatible = "regulator-fixed";
regulator-name = "usb_usb1_vbus";
gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_wifi: regulator-wifi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_wl>;
compatible = "regulator-fixed";
regulator-name = "wifi";
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&A53_0 {
cpu-supply = <&buck2>;
};
&A53_1 {
cpu-supply = <&buck2>;
};
&A53_2 {
cpu-supply = <&buck2>;
};
&A53_3 {
cpu-supply = <&buck2>;
};
&ddrc {
operating-points-v2 = <&ddrc_opp_table>;
ddrc_opp_table: opp-table {
compatible = "operating-points-v2";
opp-25M {
opp-hz = /bits/ 64 <25000000>;
};
opp-100M {
opp-hz = /bits/ 64 <100000000>;
};
opp-750M {
opp-hz = /bits/ 64 <750000000>;
};
};
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
can@0 {
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&can20m>;
oscillator-frequency = <20000000>;
interrupt-parent = <&gpio2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
spi-max-frequency = <10000000>;
};
};
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
local-mac-address = [00 00 00 00 00 00];
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
/* TI DP83867 props */
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
/* GPY111 props */
rx-internal-delay-ps = <2000>;
tx-internal-delay-ps = <2500>;
};
};
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
gsc: gsc@20 {
compatible = "gw,gsc";
reg = <0x20>;
pinctrl-0 = <&pinctrl_gsc>;
interrupt-parent = <&gpio2>;
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
adc {
compatible = "gw,gsc-adc";
#address-cells = <1>;
#size-cells = <0>;
channel@6 {
gw,mode = <0>;
reg = <0x06>;
label = "temp";
};
channel@8 {
gw,mode = <1>;
reg = <0x08>;
label = "vdd_bat";
};
channel@82 {
gw,mode = <2>;
reg = <0x82>;
label = "vin";
gw,voltage-divider-ohms = <22100 1000>;
gw,voltage-offset-microvolt = <700000>;
};
channel@84 {
gw,mode = <2>;
reg = <0x84>;
label = "vin_4p0";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@86 {
gw,mode = <2>;
reg = <0x86>;
label = "vdd_3p3";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@88 {
gw,mode = <2>;
reg = <0x88>;
label = "vdd_0p9";
};
channel@8c {
gw,mode = <2>;
reg = <0x8c>;
label = "vdd_soc";
};
channel@8e {
gw,mode = <2>;
reg = <0x8e>;
label = "vdd_arm";
};
channel@90 {
gw,mode = <2>;
reg = <0x90>;
label = "vdd_1p8";
};
channel@92 {
gw,mode = <2>;
reg = <0x92>;
label = "vdd_dram";
};
channel@98 {
gw,mode = <2>;
reg = <0x98>;
label = "vdd_1p0";
};
channel@9a {
gw,mode = <2>;
reg = <0x9a>;
label = "vdd_2p5";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@9c {
gw,mode = <2>;
reg = <0x9c>;
label = "vdd_5p0";
gw,voltage-divider-ohms = <10000 10000>;
};
channel@a2 {
gw,mode = <2>;
reg = <0xa2>;
label = "vdd_gsc";
gw,voltage-divider-ohms = <10000 10000>;
};
};
};
gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gsc>;
interrupts = <4>;
};
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio3>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clock-output-names = "clk-32k-out";
regulators {
/* vdd_soc: 0.805-0.900V (typ=0.8V) */
BUCK1 {
regulator-name = "buck1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
};
/* vdd_arm: 0.805-1.0V (typ=0.9V) */
buck2: BUCK2 {
regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <1000000>;
rohm,dvs-idle-voltage = <900000>;
};
/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
/* vdd_3p3 */
BUCK4 {
regulator-name = "buck4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
/* vdd_1p8 */
BUCK5 {
regulator-name = "buck5";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
regulator-always-on;
};
/* vdd_dram */
BUCK6 {
regulator-name = "buck6";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
regulator-always-on;
};
/* nvcc_snvs_1p8 */
LDO1 {
regulator-name = "ldo1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <1900000>;
regulator-boot-on;
regulator-always-on;
};
/* vdd_snvs_0p8 */
LDO2 {
regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
};
/* vdda_1p8 */
LDO3 {
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
LDO4 {
regulator-name = "ldo4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
LDO6 {
regulator-name = "ldo6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
};
};
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
};
eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
accelerometer@19 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_accel>;
compatible = "st,lis2de12";
reg = <0x19>;
st,drdy-int-pin = <1>;
interrupt-parent = <&gpio1>;
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "INT1";
};
secure-element@60 {
compatible = "nxp,se050";
reg = <0x60>;
};
};
/* off-board header */
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
/* off-board header */
&i2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
};
/* off-board header */
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
assigned-clock-rates = <24576000>;
status = "okay";
};
/* RS232/RS485/RS422 selectable */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
status = "okay";
};
/* RS232 console */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
/* bluetooth HCI */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
status = "okay";
bluetooth {
compatible = "brcm,bcm4330-bt";
shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
};
};
/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usbotg1 {
dr_mode = "host";
vbus-supply = <&reg_usb1_vbus>;
disable-over-current;
status = "okay";
};
/* SDIO WiFi */
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
non-removable;
vmmc-supply = <&reg_wifi>;
status = "okay";
};
/* eMMC */
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
non-removable;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */
MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RST# */
MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */
MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */
MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */
MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* APP GPIO2 */
MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* UART2_EN# */
MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x40000041 /* MIPI_GPIO1 */
MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* MIPI_GPIO2 */
MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* MIPI_GPIO3/PWM2 */
MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* MIPI_GPIO4/PWM3 */
>;
};
pinctrl_accel: accelgrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x159
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* RST# */
MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* IRQ# */
MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x141
MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x141
>;
};
pinctrl_gsc: gscgrp {
fsl,pins = <
MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
>;
};
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x40000019
MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x40000019
MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x40000019
MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x40000019
MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x40000019
>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x141 /* PPS */
>;
};
pinctrl_reg_wl: regwlgrp {
fsl,pins = <
MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 /* WLAN_WLON */
>;
};
pinctrl_reg_usb1: regusb1grp {
fsl,pins = <
MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x41
>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
>;
};
pinctrl_spi1: spi1grp {
fsl,pins = <
MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40
MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3 0x140 /* CAN_IRQ# */
>;
};
pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82
MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82
MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82
MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 /* SS0 */
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
>;
};
pinctrl_uart1_gpio: uart1gpiogrp {
fsl,pins = <
MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x40000110 /* HALF */
MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000110 /* TERM */
MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x40000110 /* RS485 */
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
>;
};
pinctrl_uart3_gpio: uart3_gpiogrp {
fsl,pins = <
MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 /* BT_EN# */
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x140 /* CTS */
MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x140 /* RTS */
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x141 /* GNSS_GASP */
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
>;
};
};
Reference in a new issue View git blame Copy permalink