u-boot/board/h2200/h2200.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

73 lines
1.3 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* iPAQ h2200 board configuration
*
* Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
*/
#include <common.h>
#include <asm/arch/pxa.h>
#include <asm/arch/pxa-regs.h>
#include <asm/io.h>
#include <usb.h>
#include <asm/mach-types.h>
DECLARE_GLOBAL_DATA_PTR;
int board_eth_init(bd_t *bis)
{
usb_eth_initialize(bis);
return 0;
}
void reset_cpu(ulong ignore)
{
/* Enable VLIO interface on Hamcop */
writeb(0x1, 0x4000);
/* Reset board (cold reset) */
writeb(0xff, 0x4002);
}
int board_init(void)
{
/* We have RAM, disable cache */
dcache_disable();
icache_disable();
gd->bd->bi_arch_number = MACH_TYPE_H2200;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
/* Let host see that device is disconnected */
udc_disconnect();
mdelay(500);
return 0;
}
int dram_init(void)
{
/*
* Everything except MSC0 was already set up by
* 1st stage bootloader.
*
* This setting enables access to companion chip.
*/
clrsetbits_le32(MSC0, 0xffffffff, CONFIG_SYS_MSC0_VAL);
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
return 0;
}
#ifdef CONFIG_USB_GADGET_PXA2XX
int board_usb_init(int index, enum usb_init_type init)
{
return 0;
}
int board_usb_cleanup(int index, enum usb_init_type init)
{
return 0;
}
#endif