Khoronzhuk, Ivan e165b1d34c dma: ti-edma3: introduce edma3 driver ... The EDMA3 controller’s primary purpose is to service data transfers that you program between two memory-mapped slave endpoints on the device. Typical usage includes, but is not limited to the following: - Servicing software-driven paging transfers (e.g., transfers from external memory, such as SDRAM to internal device memory, such as DSP L2 SRAM) - Servicing event-driven peripherals, such as a serial port - Performing sorting or sub-frame extraction of various data structures - Offloading data transfers from the main device DSP(s) - See the device-specific data manual for specific peripherals that are accessible via the EDMA3 controller Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>		2014-10-23 11:27:29 -04:00
..
apbh_dma.c	dma: apbh: Add special circular mode for LCD	2013-08-09 21:48:34 +02:00
fsl_dma.c	cosmetic: replace MIN, MAX with min, max	2014-09-24 18:30:29 -04:00
Kconfig	kconfig: add blank Kconfig files	2014-09-24 18:30:28 -04:00
keystone_nav.c	dma: keystone_nav: generalize driver usage	2014-10-23 11:27:04 -04:00
keystone_nav_cfg.c	dma: keystone_nav: generalize driver usage	2014-10-23 11:27:04 -04:00
Makefile	dma: ti-edma3: introduce edma3 driver	2014-10-23 11:27:29 -04:00
MCD_dmaApi.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
MCD_tasks.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
MCD_tasksInit.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
ti-edma3.c	dma: ti-edma3: introduce edma3 driver	2014-10-23 11:27:29 -04:00