u-boot/board/Marvell/db-88f6820-gp
Chris Packham 01c541e0e6 arm: mvebu: correct comments around cas_wl/cas_l
The order of members in struct hws_topology_map is cas_wl, cas_l. The
comments in the original db-88f6820-gp.c had this wrong and have been
copied to other Armada-385 based boards. Practically this hasn't made a
difference since all these boards set both cas_wl and cas_l to 0
(autodetect) but if there were ever a board that did need to set these
explicitly they would run into unexpected issued.

Update the comments to reflect the correct order of structure members.

Reported-by: Tobi Wulff <tobi.wulff@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2017-11-30 08:30:59 +01:00
..
db-88f6820-gp.c arm: mvebu: correct comments around cas_wl/cas_l 2017-11-30 08:30:59 +01:00
kwbimage.cfg arm: mvebu: Add DM and OF_CONTROL support to SPL 2016-01-14 14:08:59 +01:00
MAINTAINERS arm: mvebu: db-88f6820-gp: Add MAINTAINERS file 2015-07-10 14:51:31 +02:00
Makefile arm: mvebu: Add Armada A38x DB-88F6820-GP board support 2015-05-05 14:32:05 +02:00
README arm: mvebu: db-88f6820: Add SPL support with DDR init code 2015-07-23 10:39:35 +02:00

Update from original Marvell U-Boot to mainline U-Boot:
-------------------------------------------------------

The resulting image including the SPL binary with the
full DDR setup is "u-boot-spl.kwb".

To update the SPI NOR flash, please use the following
command:

=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\
sf update 2000000 0 60000

Note that the original Marvell U-Boot seems to have
problems with the "sf update" command. This does not
work reliable. So here this command should be used:

=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\
sf erase 0 60000;sf write 2000000 0 60000