Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 08:57:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/ti/omap5912osk/omap5912osk.c
Wolfgang Denk f0c0b3a9e6 Fix incorrect use of getenv() before relocation 
A large number of boards incorrectly used getenv() in their board init
code running before relocation.  In some cases this caused U-Boot to
hang when certain environment variables grew too long.
Fix the code to use getenv_r().

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: The LEOX team <team@leox.org>
Cc: Michael Schwingen <michael@schwingen.org>
Cc: Georg Schardt <schardt@team-ctech.de>
Cc: Werner Pfister <Pfister_Werner@intercontrol.de>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Peter De Schrijver <p2@mind.be>
Cc: John Zhan <zhanz@sinovee.com>
Cc: Rishi Bhattacharya <rishi@ti.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
2011-05-12 19:48:42 +02:00

321 lines
9.1 KiB
C
Raw Blame History

/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* (C) Copyright 2003
* Texas Instruments, <www.ti.com>
* Kshitij Gupta <Kshitij@ti.com>
*
* (C) Copyright 2004
* Texas Instruments, <www.ti.com>
* Rishi Bhattacharya <rishi@ti.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#if defined(CONFIG_OMAP1610)
#include <./configs/omap1510.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
void flash__init (void);
void ether__init (void);
void set_muxconf_regs (void);
void peripheral_power_enable (void);
#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
static inline void delay (unsigned long loops)
{
__asm__ volatile ("1:\n"
"subs %0, %1, #1\n"
"bne 1b":"=r" (loops):"0" (loops));
}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init (void)
{
gd->bd->bi_arch_number = MACH_TYPE_OMAP_OSK;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x10000100;
/* Configure MUX settings */
set_muxconf_regs ();
peripheral_power_enable ();
/* this speeds up your boot a quite a bit. However to make it
* work, you need make sure your kernel startup flush bug is fixed.
* ... rkw ...
*/
icache_enable ();
flash__init ();
ether__init ();
return 0;
}
int misc_init_r (void)
{
/* currently empty */
return (0);
}
/******************************
Routine:
Description:
******************************/
void flash__init (void)
{
#define EMIFS_GlB_Config_REG 0xfffecc0c
unsigned int regval;
regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
/* Turn off write protection for flash devices. */
regval = regval | 0x0001;
*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
}
/*************************************************************
Routine:ether__init
Description: take the Ethernet controller out of reset and wait
for the EEPROM load to complete.
*************************************************************/
void ether__init (void)
{
#define ETH_CONTROL_REG 0x0480000b
int i;
*((volatile unsigned short *) 0xfffece08) = 0x03FF;
*((volatile unsigned short *) 0xfffb3824) = 0x8000;
*((volatile unsigned short *) 0xfffb3830) = 0x0000;
*((volatile unsigned short *) 0xfffb3834) = 0x0009;
*((volatile unsigned short *) 0xfffb3838) = 0x0009;
*((volatile unsigned short *) 0xfffb3818) = 0x0002;
*((volatile unsigned short *) 0xfffb382C) = 0x0048;
*((volatile unsigned short *) 0xfffb3824) = 0x8603;
udelay (3);
for (i=0;i<2000;i++);
*((volatile unsigned short *) 0xfffb381C) = 0x6610;
udelay (30);
for (i=0;i<10000;i++);
*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
udelay (3);
}
/******************************
Routine:
Description:
******************************/
int dram_init (void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
/******************************************************
Routine: set_muxconf_regs
Description: Setting up the configuration Mux registers
specific to the hardware
*******************************************************/
void set_muxconf_regs (void)
{
volatile unsigned int *MuxConfReg;
/* set each registers to its reset value; */
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
/* setup for UART1 */
*MuxConfReg &= ~(0x02000000); /* bit 25 */
/* setup for UART2 */
*MuxConfReg &= ~(0x01000000); /* bit 24 */
/* Disable Uwire CS Hi-Z */
*MuxConfReg |= 0x08000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_3);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_4);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_5);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_6);
/*setup mux for UART3 */
*MuxConfReg |= 0x00000001; /* bit3, 1, 0 (mux0 5,5,26) */
*MuxConfReg &= ~0x0000003e;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_7);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_8);
/* Disable Uwire CS Hi-Z */
*MuxConfReg |= 0x00001200; /*bit 9 for CS0 12 for CS3 */
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_9);
/* Need to turn on bits 21 and 12 in FUNC_MUX_CTRL_9 so the */
/* hardware will actually use TX and RTS based on bit 25 in */
/* FUNC_MUX_CTRL_0. I told you this thing was screwy! */
*MuxConfReg |= 0x00201000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_A);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_B);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_C);
/* setup for UART2 */
/* Need to turn on bits 27 and 24 in FUNC_MUX_CTRL_C so the */
/* hardware will actually use TX and RTS based on bit 24 in */
/* FUNC_MUX_CTRL_0. */
*MuxConfReg |= 0x09000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_D);
*MuxConfReg |= 0x00000020;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_0);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_1);
*MuxConfReg = 0x00000000;
/* mux setup for SD/MMC driver */
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_2);
*MuxConfReg &= 0xFFFE0FFF;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_3);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
/* bit 13 for MMC2 XOR_CLK */
*MuxConfReg &= ~(0x00002000);
/* bit 29 for UART 1 */
*MuxConfReg &= ~(0x00002000);
MuxConfReg =
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
/* Configure for USB. Turn on VBUS_CTRL and VBUS_MODE. */
*MuxConfReg |= 0x000C0000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int)USB_TRANSCEIVER_CTRL);
*MuxConfReg &= ~(0x00000070);
*MuxConfReg &= ~(0x00000008);
*MuxConfReg |= 0x00000003;
*MuxConfReg |= 0x00000180;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
/* bit 17, software controls VBUS */
*MuxConfReg &= ~(0x00020000);
/* Enable USB 48 and 12M clocks */
*MuxConfReg |= 0x00000200;
*MuxConfReg &= ~(0x00000180);
/*2.75V for MMCSDIO1 */
MuxConfReg =
(volatile unsigned int *) ((unsigned int) VOLTAGE_CTRL_0);
*MuxConfReg = 0x00001FE7;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_0);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_1);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_3);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_4);
*MuxConfReg = 0x00000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_4);
*MuxConfReg = 0x00000000;
/* Turn on UART2 48 MHZ clock */
MuxConfReg =
(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
*MuxConfReg |= 0x40000000;
MuxConfReg =
(volatile unsigned int *) ((unsigned int) USB_OTG_CTRL);
/* setup for USB VBus detection OMAP161x */
*MuxConfReg |= 0x00040000; /* bit 18 */
MuxConfReg =
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
/* PullUps for SD/MMC driver */
*MuxConfReg |= ~(0xFFFE0FFF);
MuxConfReg =
(volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0);
*MuxConfReg = COMP_MODE_ENABLE;
}
/******************************************************
Routine: peripheral_power_enable
Description: Enable the power for UART1
*******************************************************/
void peripheral_power_enable (void)
{
#define UART1_48MHZ_ENABLE ((unsigned short)0x0200)
#define SW_CLOCK_REQUEST ((volatile unsigned short *)0xFFFE0834)
*SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE;
}
/*
* Check Board Identity
*/
int checkboard(void)
{
char buf[64];
int i = getenv_f("serial#", buf, sizeof(buf));
puts("Board: OSK5912");
if (i > 0) {
puts(", serial# ");
puts(buf);
}
putc('\n');
return (0);
}
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_LAN91C96
rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
#endif
return rc;
}
#endif
Reference in a new issue View git blame Copy permalink