u-boot/drivers/usb/mtu3/mtu3_host.c
Chunfeng Yun e09b88cd08 usb: add MediaTek USB3 DRD driver
This patch adds support for the MediaTek USB3 DRD controller,
its host side is based on xHCI, this driver supports device mode
and host mode.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-20 00:49:05 +02:00

141 lines
3.6 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* mtu3_dr.c - dual role switch and host glue layer
*
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
*/
#include <dm/lists.h>
#include <linux/iopoll.h>
#include "mtu3.h"
#include "mtu3_dr.h"
static void host_ports_num_get(struct mtu3_host *u3h)
{
u32 xhci_cap;
xhci_cap = mtu3_readl(u3h->ippc_base, U3D_SSUSB_IP_XHCI_CAP);
u3h->u2_ports = SSUSB_IP_XHCI_U2_PORT_NUM(xhci_cap);
u3h->u3_ports = SSUSB_IP_XHCI_U3_PORT_NUM(xhci_cap);
dev_dbg(u3h->dev, "host - u2_ports:%d, u3_ports:%d\n",
u3h->u2_ports, u3h->u3_ports);
}
/* only configure ports will be used later */
static int ssusb_host_enable(struct mtu3_host *u3h)
{
void __iomem *ibase = u3h->ippc_base;
int num_u3p = u3h->u3_ports;
int num_u2p = u3h->u2_ports;
int u3_ports_disabed;
u32 check_clk;
u32 value;
int i;
/* power on host ip */
mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
/* power on and enable u3 ports except skipped ones */
u3_ports_disabed = 0;
for (i = 0; i < num_u3p; i++) {
if ((0x1 << i) & u3h->u3p_dis_msk) {
u3_ports_disabed++;
continue;
}
value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
value |= SSUSB_U3_PORT_HOST_SEL;
mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
}
/* power on and enable all u2 ports */
for (i = 0; i < num_u2p; i++) {
value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
value &= ~(SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS);
value |= SSUSB_U2_PORT_HOST_SEL;
mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
}
check_clk = SSUSB_XHCI_RST_B_STS;
if (num_u3p > u3_ports_disabed)
check_clk = SSUSB_U3_MAC_RST_B_STS;
return ssusb_check_clocks(u3h->ssusb, check_clk);
}
static void ssusb_host_disable(struct mtu3_host *u3h)
{
void __iomem *ibase = u3h->ippc_base;
int num_u3p = u3h->u3_ports;
int num_u2p = u3h->u2_ports;
u32 value;
int i;
/* power down and disable u3 ports except skipped ones */
for (i = 0; i < num_u3p; i++) {
if ((0x1 << i) & u3h->u3p_dis_msk)
continue;
value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
value |= SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS;
mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
}
/* power down and disable all u2 ports */
for (i = 0; i < num_u2p; i++) {
value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
value |= SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS;
mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
}
/* power down host ip */
mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
}
/*
* If host supports multiple ports, the VBUSes(5V) of ports except port0
* which supports OTG are better to be enabled by default in DTS.
* Because the host driver will keep link with devices attached when system
* enters suspend mode, so no need to control VBUSes after initialization.
*/
int ssusb_host_init(struct ssusb_mtk *ssusb)
{
struct mtu3_host *u3h = ssusb->u3h;
struct udevice *dev = u3h->dev;
int ret;
u3h->ssusb = ssusb;
u3h->hcd = ssusb->mac_base;
u3h->ippc_base = ssusb->ippc_base;
/* optional property, ignore the error */
dev_read_u32(dev, "mediatek,u3p-dis-msk", &u3h->u3p_dis_msk);
host_ports_num_get(u3h);
ret = ssusb_host_enable(u3h);
if (ret)
return ret;
ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
ret = regulator_set_enable(ssusb->vbus_supply, true);
if (ret < 0 && ret != -ENOSYS) {
dev_err(dev, "failed to enable vbus %d!\n", ret);
return ret;
}
dev_info(dev, "%s done...\n", __func__);
return 0;
}
void ssusb_host_exit(struct ssusb_mtk *ssusb)
{
regulator_set_enable(ssusb->vbus_supply, false);
ssusb_host_disable(ssusb->u3h);
}