Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-11 13:56:30 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/cpu/ppc4xx/40x_spd_sdram.c
Stefan Roese 36d830c983 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files 
Since the existing 4xx SPD SDRAM initialization routines for the
405 SDRAM controller and the 440 DDR controller don't have much in
common this patch splits both drivers into different files.

This is in preparation for the 440 DDR2 controller support (440SP/e).

Signed-off-by: Stefan Roese <sr@denx.de>
2007-02-20 10:35:42 +01:00

469 lines
12 KiB
C
Raw Blame History

/*
* cpu/ppc4xx/40x_spd_sdram.c
* This SPD SDRAM detection code supports IBM/AMCC PPC44x cpu with a
* SDRAM controller. Those are all current 405 PPC's.
*
* (C) Copyright 2001
* Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
*
* Based on code by:
*
* Kenneth Johansson ,Ericsson AB.
* kenneth.johansson@etx.ericsson.se
*
* hacked up by bill hunter. fixed so we could run before
* serial_init and console_init. previous version avoided this by
* running out of cache memory during serial/console init, then running
* this code later.
*
* (C) Copyright 2002
* Jun Gu, Artesyn Technology, jung@artesyncp.com
* Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
*
* (C) Copyright 2005
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <i2c.h>
#include <ppc4xx.h>
#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_440)
/*
* Set default values
*/
#ifndef CFG_I2C_SPEED
#define CFG_I2C_SPEED 50000
#endif
#ifndef CFG_I2C_SLAVE
#define CFG_I2C_SLAVE 0xFE
#endif
#define ONE_BILLION 1000000000
#define SDRAM0_CFG_DCE 0x80000000
#define SDRAM0_CFG_SRE 0x40000000
#define SDRAM0_CFG_PME 0x20000000
#define SDRAM0_CFG_MEMCHK 0x10000000
#define SDRAM0_CFG_REGEN 0x08000000
#define SDRAM0_CFG_ECCDD 0x00400000
#define SDRAM0_CFG_EMDULR 0x00200000
#define SDRAM0_CFG_DRW_SHIFT (31-6)
#define SDRAM0_CFG_BRPF_SHIFT (31-8)
#define SDRAM0_TR_CASL_SHIFT (31-8)
#define SDRAM0_TR_PTA_SHIFT (31-13)
#define SDRAM0_TR_CTP_SHIFT (31-15)
#define SDRAM0_TR_LDF_SHIFT (31-17)
#define SDRAM0_TR_RFTA_SHIFT (31-29)
#define SDRAM0_TR_RCD_SHIFT (31-31)
#define SDRAM0_RTR_SHIFT (31-15)
#define SDRAM0_ECCCFG_SHIFT (31-11)
/* SDRAM0_CFG enable macro */
#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
#define SDRAM0_BXCR_SZ_MASK 0x000e0000
#define SDRAM0_BXCR_AM_MASK 0x0000e000
#define SDRAM0_BXCR_SZ_SHIFT (31-14)
#define SDRAM0_BXCR_AM_SHIFT (31-18)
#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
#ifdef CONFIG_SPDDRAM_SILENT
# define SPD_ERR(x) do { return 0; } while (0)
#else
# define SPD_ERR(x) do { printf(x); return(0); } while (0)
#endif
#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
/* function prototypes */
int spd_read(uint addr);
/*
* This function is reading data from the DIMM module EEPROM over the SPD bus
* and uses that to program the sdram controller.
*
* This works on boards that has the same schematics that the AMCC walnut has.
*
* Input: null for default I2C spd functions or a pointer to a custom function
* returning spd_data.
*/
long int spd_sdram(int(read_spd)(uint addr))
{
int tmp,row,col;
int total_size,bank_size,bank_code;
int ecc_on;
int mode;
int bank_cnt;
int sdram0_pmit=0x07c00000;
#ifndef CONFIG_405EP /* not on PPC405EP */
int sdram0_besr0=-1;
int sdram0_besr1=-1;
int sdram0_eccesr=-1;
#endif
int sdram0_ecccfg;
int sdram0_rtr=0;
int sdram0_tr=0;
int sdram0_b0cr;
int sdram0_b1cr;
int sdram0_b2cr;
int sdram0_b3cr;
int sdram0_cfg=0;
int t_rp;
int t_rcd;
int t_ras;
int t_rc;
int min_cas;
PPC405_SYS_INFO sys_info;
unsigned long bus_period_x_10;
/*
* get the board info
*/
get_sys_info(&sys_info);
bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
if (read_spd == 0){
read_spd=spd_read;
/*
* Make sure I2C controller is initialized
* before continuing.
*/
i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
}
/* Make shure we are using SDRAM */
if (read_spd(2) != 0x04) {
SPD_ERR("SDRAM - non SDRAM memory module found\n");
}
/* ------------------------------------------------------------------
* configure memory timing register
*
* data from DIMM:
* 27 IN Row Precharge Time ( t RP)
* 29 MIN RAS to CAS Delay ( t RCD)
* 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
* -------------------------------------------------------------------*/
/*
* first figure out which cas latency mode to use
* use the min supported mode
*/
tmp = read_spd(127) & 0x6;
if (tmp == 0x02) { /* only cas = 2 supported */
min_cas = 2;
/* t_ck = read_spd(9); */
/* t_ac = read_spd(10); */
} else if (tmp == 0x04) { /* only cas = 3 supported */
min_cas = 3;
/* t_ck = read_spd(9); */
/* t_ac = read_spd(10); */
} else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
min_cas = 2;
/* t_ck = read_spd(23); */
/* t_ac = read_spd(24); */
} else {
SPD_ERR("SDRAM - unsupported CAS latency \n");
}
/* get some timing values, t_rp,t_rcd,t_ras,t_rc
*/
t_rp = read_spd(27);
t_rcd = read_spd(29);
t_ras = read_spd(30);
t_rc = t_ras + t_rp;
/* The following timing calcs subtract 1 before deviding.
* this has effect of using ceiling instead of floor rounding,
* and also subtracting 1 to convert number to reg value
*/
/* set up CASL */
sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
/* set up PTA */
sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
/* set up CTP */
tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
if (tmp < 1)
tmp = 1;
sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
/* set LDF = 2 cycles, reg value = 1 */
sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
/* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
if (tmp < 0)
tmp = 0;
if (tmp > 6)
tmp = 6;
sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
/* set RCD = t_rcd/bus_period*/
sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
/*------------------------------------------------------------------
* configure RTR register
* -------------------------------------------------------------------*/
row = read_spd(3);
col = read_spd(4);
tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
switch (tmp) {
case 0x00:
tmp = 15625;
break;
case 0x01:
tmp = 15625 / 4;
break;
case 0x02:
tmp = 15625 / 2;
break;
case 0x03:
tmp = 15625 * 2;
break;
case 0x04:
tmp = 15625 * 4;
break;
case 0x05:
tmp = 15625 * 8;
break;
default:
SPD_ERR("SDRAM - Bad refresh period \n");
}
/* convert from nsec to bus cycles */
tmp = (tmp * 10) / bus_period_x_10;
sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
/*------------------------------------------------------------------
* determine the number of banks used
* -------------------------------------------------------------------*/
/* byte 7:6 is module data width */
if (read_spd(7) != 0)
SPD_ERR("SDRAM - unsupported module width\n");
tmp = read_spd(6);
if (tmp < 32)
SPD_ERR("SDRAM - unsupported module width\n");
else if (tmp < 64)
bank_cnt = 1; /* one bank per sdram side */
else if (tmp < 73)
bank_cnt = 2; /* need two banks per side */
else if (tmp < 161)
bank_cnt = 4; /* need four banks per side */
else
SPD_ERR("SDRAM - unsupported module width\n");
/* byte 5 is the module row count (refered to as dimm "sides") */
tmp = read_spd(5);
if (tmp == 1)
;
else if (tmp==2)
bank_cnt *= 2;
else if (tmp==4)
bank_cnt *= 4;
else
bank_cnt = 8; /* 8 is an error code */
if (bank_cnt > 4) /* we only have 4 banks to work with */
SPD_ERR("SDRAM - unsupported module rows for this width\n");
/* now check for ECC ability of module. We only support ECC
* on 32 bit wide devices with 8 bit ECC.
*/
if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
ecc_on = 1;
} else {
sdram0_ecccfg = 0;
ecc_on = 0;
}
/*------------------------------------------------------------------
* calculate total size
* -------------------------------------------------------------------*/
/* calculate total size and do sanity check */
tmp = read_spd(31);
total_size = 1 << 22; /* total_size = 4MB */
/* now multiply 4M by the smallest device row density */
/* note that we don't support asymetric rows */
while (((tmp & 0x0001) == 0) && (tmp != 0)) {
total_size = total_size << 1;
tmp = tmp >> 1;
}
total_size *= read_spd(5); /* mult by module rows (dimm sides) */
/*------------------------------------------------------------------
* map rows * cols * banks to a mode
* -------------------------------------------------------------------*/
switch (row) {
case 11:
switch (col) {
case 8:
mode=4; /* mode 5 */
break;
case 9:
case 10:
mode=0; /* mode 1 */
break;
default:
SPD_ERR("SDRAM - unsupported mode\n");
}
break;
case 12:
switch (col) {
case 8:
mode=3; /* mode 4 */
break;
case 9:
case 10:
mode=1; /* mode 2 */
break;
default:
SPD_ERR("SDRAM - unsupported mode\n");
}
break;
case 13:
switch (col) {
case 8:
mode=5; /* mode 6 */
break;
case 9:
case 10:
if (read_spd(17) == 2)
mode = 6; /* mode 7 */
else
mode = 2; /* mode 3 */
break;
case 11:
mode = 2; /* mode 3 */
break;
default:
SPD_ERR("SDRAM - unsupported mode\n");
}
break;
default:
SPD_ERR("SDRAM - unsupported mode\n");
}
/*------------------------------------------------------------------
* using the calculated values, compute the bank
* config register values.
* -------------------------------------------------------------------*/
sdram0_b1cr = 0;
sdram0_b2cr = 0;
sdram0_b3cr = 0;
/* compute the size of each bank */
bank_size = total_size / bank_cnt;
/* convert bank size to bank size code for ppc4xx
by takeing log2(bank_size) - 22 */
tmp = bank_size; /* start with tmp = bank_size */
bank_code = 0; /* and bank_code = 0 */
while (tmp > 1) { /* this takes log2 of tmp */
bank_code++; /* and stores result in bank_code */
tmp = tmp >> 1;
} /* bank_code is now log2(bank_size) */
bank_code -= 22; /* subtract 22 to get the code */
tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
sdram0_b0cr = (bank_size * 0) | tmp;
#ifndef CONFIG_405EP /* not on PPC405EP */
if (bank_cnt > 1)
sdram0_b2cr = (bank_size * 1) | tmp;
if (bank_cnt > 2)
sdram0_b1cr = (bank_size * 2) | tmp;
if (bank_cnt > 3)
sdram0_b3cr = (bank_size * 3) | tmp;
#else
/* PPC405EP chip only supports two SDRAM banks */
if (bank_cnt > 1)
sdram0_b1cr = (bank_size * 1) | tmp;
if (bank_cnt > 2)
total_size = 2 * bank_size;
#endif
/*
* enable sdram controller DCE=1
* enable burst read prefetch to 32 bytes BRPF=2
* leave other functions off
*/
/*------------------------------------------------------------------
* now that we've done our calculations, we are ready to
* program all the registers.
* -------------------------------------------------------------------*/
#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
/* disable memcontroller so updates work */
mtsdram0( mem_mcopt1, 0 );
#ifndef CONFIG_405EP /* not on PPC405EP */
mtsdram0( mem_besra , sdram0_besr0 );
mtsdram0( mem_besrb , sdram0_besr1 );
mtsdram0( mem_ecccf , sdram0_ecccfg );
mtsdram0( mem_eccerr, sdram0_eccesr );
#endif
mtsdram0( mem_rtr , sdram0_rtr );
mtsdram0( mem_pmit , sdram0_pmit );
mtsdram0( mem_mb0cf , sdram0_b0cr );
mtsdram0( mem_mb1cf , sdram0_b1cr );
#ifndef CONFIG_405EP /* not on PPC405EP */
mtsdram0( mem_mb2cf , sdram0_b2cr );
mtsdram0( mem_mb3cf , sdram0_b3cr );
#endif
mtsdram0( mem_sdtr1 , sdram0_tr );
/* SDRAM have a power on delay, 500 micro should do */
udelay(500);
sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
if (ecc_on)
sdram0_cfg |= SDRAM0_CFG_MEMCHK;
mtsdram0(mem_mcopt1, sdram0_cfg);
return (total_size);
}
int spd_read(uint addr)
{
uchar data[2];
if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0)
return (int)data[0];
else
return 0;
}
#endif /* CONFIG_SPD_EEPROM */
Reference in a new issue View git blame Copy permalink