mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
3b904ccb93
Replace COBJS-y with appropriate driver config names. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
536 lines
13 KiB
C
536 lines
13 KiB
C
/*
|
|
* (C) Copyright 2002 Wolfgang Grandegger, wg@denx.de.
|
|
*
|
|
* This driver for AMD PCnet network controllers is derived from the
|
|
* Linux driver pcnet32.c written 1996-1999 by Thomas Bogendoerfer.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <asm/io.h>
|
|
#include <pci.h>
|
|
|
|
#if 0
|
|
#define PCNET_DEBUG_LEVEL 0 /* 0=off, 1=init, 2=rx/tx */
|
|
#endif
|
|
|
|
#if PCNET_DEBUG_LEVEL > 0
|
|
#define PCNET_DEBUG1(fmt,args...) printf (fmt ,##args)
|
|
#if PCNET_DEBUG_LEVEL > 1
|
|
#define PCNET_DEBUG2(fmt,args...) printf (fmt ,##args)
|
|
#else
|
|
#define PCNET_DEBUG2(fmt,args...)
|
|
#endif
|
|
#else
|
|
#define PCNET_DEBUG1(fmt,args...)
|
|
#define PCNET_DEBUG2(fmt,args...)
|
|
#endif
|
|
|
|
#if !defined(CONF_PCNET_79C973) && defined(CONF_PCNET_79C975)
|
|
#error "Macro for PCnet chip version is not defined!"
|
|
#endif
|
|
|
|
/*
|
|
* Set the number of Tx and Rx buffers, using Log_2(# buffers).
|
|
* Reasonable default values are 4 Tx buffers, and 16 Rx buffers.
|
|
* That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4).
|
|
*/
|
|
#define PCNET_LOG_TX_BUFFERS 0
|
|
#define PCNET_LOG_RX_BUFFERS 2
|
|
|
|
#define TX_RING_SIZE (1 << (PCNET_LOG_TX_BUFFERS))
|
|
#define TX_RING_LEN_BITS ((PCNET_LOG_TX_BUFFERS) << 12)
|
|
|
|
#define RX_RING_SIZE (1 << (PCNET_LOG_RX_BUFFERS))
|
|
#define RX_RING_LEN_BITS ((PCNET_LOG_RX_BUFFERS) << 4)
|
|
|
|
#define PKT_BUF_SZ 1544
|
|
|
|
/* The PCNET Rx and Tx ring descriptors. */
|
|
struct pcnet_rx_head {
|
|
u32 base;
|
|
s16 buf_length;
|
|
s16 status;
|
|
u32 msg_length;
|
|
u32 reserved;
|
|
};
|
|
|
|
struct pcnet_tx_head {
|
|
u32 base;
|
|
s16 length;
|
|
s16 status;
|
|
u32 misc;
|
|
u32 reserved;
|
|
};
|
|
|
|
/* The PCNET 32-Bit initialization block, described in databook. */
|
|
struct pcnet_init_block {
|
|
u16 mode;
|
|
u16 tlen_rlen;
|
|
u8 phys_addr[6];
|
|
u16 reserved;
|
|
u32 filter[2];
|
|
/* Receive and transmit ring base, along with extra bits. */
|
|
u32 rx_ring;
|
|
u32 tx_ring;
|
|
u32 reserved2;
|
|
};
|
|
|
|
typedef struct pcnet_priv {
|
|
struct pcnet_rx_head rx_ring[RX_RING_SIZE];
|
|
struct pcnet_tx_head tx_ring[TX_RING_SIZE];
|
|
struct pcnet_init_block init_block;
|
|
/* Receive Buffer space */
|
|
unsigned char rx_buf[RX_RING_SIZE][PKT_BUF_SZ + 4];
|
|
int cur_rx;
|
|
int cur_tx;
|
|
} pcnet_priv_t;
|
|
|
|
static pcnet_priv_t *lp;
|
|
|
|
/* Offsets from base I/O address for WIO mode */
|
|
#define PCNET_RDP 0x10
|
|
#define PCNET_RAP 0x12
|
|
#define PCNET_RESET 0x14
|
|
#define PCNET_BDP 0x16
|
|
|
|
static u16 pcnet_read_csr (struct eth_device *dev, int index)
|
|
{
|
|
outw (index, dev->iobase + PCNET_RAP);
|
|
return inw (dev->iobase + PCNET_RDP);
|
|
}
|
|
|
|
static void pcnet_write_csr (struct eth_device *dev, int index, u16 val)
|
|
{
|
|
outw (index, dev->iobase + PCNET_RAP);
|
|
outw (val, dev->iobase + PCNET_RDP);
|
|
}
|
|
|
|
static u16 pcnet_read_bcr (struct eth_device *dev, int index)
|
|
{
|
|
outw (index, dev->iobase + PCNET_RAP);
|
|
return inw (dev->iobase + PCNET_BDP);
|
|
}
|
|
|
|
static void pcnet_write_bcr (struct eth_device *dev, int index, u16 val)
|
|
{
|
|
outw (index, dev->iobase + PCNET_RAP);
|
|
outw (val, dev->iobase + PCNET_BDP);
|
|
}
|
|
|
|
static void pcnet_reset (struct eth_device *dev)
|
|
{
|
|
inw (dev->iobase + PCNET_RESET);
|
|
}
|
|
|
|
static int pcnet_check (struct eth_device *dev)
|
|
{
|
|
outw (88, dev->iobase + PCNET_RAP);
|
|
return (inw (dev->iobase + PCNET_RAP) == 88);
|
|
}
|
|
|
|
static int pcnet_init (struct eth_device *dev, bd_t * bis);
|
|
static int pcnet_send (struct eth_device *dev, volatile void *packet,
|
|
int length);
|
|
static int pcnet_recv (struct eth_device *dev);
|
|
static void pcnet_halt (struct eth_device *dev);
|
|
static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_num);
|
|
|
|
#define PCI_TO_MEM(d,a) pci_phys_to_mem((pci_dev_t)d->priv, (u_long)(a))
|
|
#define PCI_TO_MEM_LE(d,a) (u32)(cpu_to_le32(PCI_TO_MEM(d,a)))
|
|
|
|
static struct pci_device_id supported[] = {
|
|
{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE},
|
|
{}
|
|
};
|
|
|
|
|
|
int pcnet_initialize (bd_t * bis)
|
|
{
|
|
pci_dev_t devbusfn;
|
|
struct eth_device *dev;
|
|
u16 command, status;
|
|
int dev_nr = 0;
|
|
|
|
PCNET_DEBUG1 ("\npcnet_initialize...\n");
|
|
|
|
for (dev_nr = 0;; dev_nr++) {
|
|
|
|
/*
|
|
* Find the PCnet PCI device(s).
|
|
*/
|
|
if ((devbusfn = pci_find_devices (supported, dev_nr)) < 0) {
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Allocate and pre-fill the device structure.
|
|
*/
|
|
dev = (struct eth_device *) malloc (sizeof *dev);
|
|
dev->priv = (void *) devbusfn;
|
|
sprintf (dev->name, "pcnet#%d", dev_nr);
|
|
|
|
/*
|
|
* Setup the PCI device.
|
|
*/
|
|
pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
|
|
(unsigned int *) &dev->iobase);
|
|
dev->iobase=pci_io_to_phys (devbusfn, dev->iobase);
|
|
dev->iobase &= ~0xf;
|
|
|
|
PCNET_DEBUG1 ("%s: devbusfn=0x%x iobase=0x%x: ",
|
|
dev->name, devbusfn, dev->iobase);
|
|
|
|
command = PCI_COMMAND_IO | PCI_COMMAND_MASTER;
|
|
pci_write_config_word (devbusfn, PCI_COMMAND, command);
|
|
pci_read_config_word (devbusfn, PCI_COMMAND, &status);
|
|
if ((status & command) != command) {
|
|
printf ("%s: Couldn't enable IO access or Bus Mastering\n", dev->name);
|
|
free (dev);
|
|
continue;
|
|
}
|
|
|
|
pci_write_config_byte (devbusfn, PCI_LATENCY_TIMER, 0x40);
|
|
|
|
/*
|
|
* Probe the PCnet chip.
|
|
*/
|
|
if (pcnet_probe (dev, bis, dev_nr) < 0) {
|
|
free (dev);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Setup device structure and register the driver.
|
|
*/
|
|
dev->init = pcnet_init;
|
|
dev->halt = pcnet_halt;
|
|
dev->send = pcnet_send;
|
|
dev->recv = pcnet_recv;
|
|
|
|
eth_register (dev);
|
|
}
|
|
|
|
udelay (10 * 1000);
|
|
|
|
return dev_nr;
|
|
}
|
|
|
|
static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
|
|
{
|
|
int chip_version;
|
|
char *chipname;
|
|
|
|
#ifdef PCNET_HAS_PROM
|
|
int i;
|
|
#endif
|
|
|
|
/* Reset the PCnet controller */
|
|
pcnet_reset (dev);
|
|
|
|
/* Check if register access is working */
|
|
if (pcnet_read_csr (dev, 0) != 4 || !pcnet_check (dev)) {
|
|
printf ("%s: CSR register access check failed\n", dev->name);
|
|
return -1;
|
|
}
|
|
|
|
/* Identify the chip */
|
|
chip_version =
|
|
pcnet_read_csr (dev, 88) | (pcnet_read_csr (dev, 89) << 16);
|
|
if ((chip_version & 0xfff) != 0x003)
|
|
return -1;
|
|
chip_version = (chip_version >> 12) & 0xffff;
|
|
switch (chip_version) {
|
|
case 0x2621:
|
|
chipname = "PCnet/PCI II 79C970A"; /* PCI */
|
|
break;
|
|
#ifdef CONFIG_PCNET_79C973
|
|
case 0x2625:
|
|
chipname = "PCnet/FAST III 79C973"; /* PCI */
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_PCNET_79C975
|
|
case 0x2627:
|
|
chipname = "PCnet/FAST III 79C975"; /* PCI */
|
|
break;
|
|
#endif
|
|
default:
|
|
printf ("%s: PCnet version %#x not supported\n",
|
|
dev->name, chip_version);
|
|
return -1;
|
|
}
|
|
|
|
PCNET_DEBUG1 ("AMD %s\n", chipname);
|
|
|
|
#ifdef PCNET_HAS_PROM
|
|
/*
|
|
* In most chips, after a chip reset, the ethernet address is read from
|
|
* the station address PROM at the base address and programmed into the
|
|
* "Physical Address Registers" CSR12-14.
|
|
*/
|
|
for (i = 0; i < 3; i++) {
|
|
unsigned int val;
|
|
|
|
val = pcnet_read_csr (dev, i + 12) & 0x0ffff;
|
|
/* There may be endianness issues here. */
|
|
dev->enetaddr[2 * i] = val & 0x0ff;
|
|
dev->enetaddr[2 * i + 1] = (val >> 8) & 0x0ff;
|
|
}
|
|
#endif /* PCNET_HAS_PROM */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcnet_init (struct eth_device *dev, bd_t * bis)
|
|
{
|
|
int i, val;
|
|
u32 addr;
|
|
|
|
PCNET_DEBUG1 ("%s: pcnet_init...\n", dev->name);
|
|
|
|
/* Switch pcnet to 32bit mode */
|
|
pcnet_write_bcr (dev, 20, 2);
|
|
|
|
#ifdef CONFIG_PN62
|
|
/* Setup LED registers */
|
|
val = pcnet_read_bcr (dev, 2) | 0x1000;
|
|
pcnet_write_bcr (dev, 2, val); /* enable LEDPE */
|
|
pcnet_write_bcr (dev, 4, 0x5080); /* 100MBit */
|
|
pcnet_write_bcr (dev, 5, 0x40c0); /* LNKSE */
|
|
pcnet_write_bcr (dev, 6, 0x4090); /* TX Activity */
|
|
pcnet_write_bcr (dev, 7, 0x4084); /* RX Activity */
|
|
#endif
|
|
|
|
/* Set/reset autoselect bit */
|
|
val = pcnet_read_bcr (dev, 2) & ~2;
|
|
val |= 2;
|
|
pcnet_write_bcr (dev, 2, val);
|
|
|
|
/* Enable auto negotiate, setup, disable fd */
|
|
val = pcnet_read_bcr (dev, 32) & ~0x98;
|
|
val |= 0x20;
|
|
pcnet_write_bcr (dev, 32, val);
|
|
|
|
/*
|
|
* We only maintain one structure because the drivers will never
|
|
* be used concurrently. In 32bit mode the RX and TX ring entries
|
|
* must be aligned on 16-byte boundaries.
|
|
*/
|
|
if (lp == NULL) {
|
|
addr = (u32) malloc (sizeof (pcnet_priv_t) + 0x10);
|
|
addr = (addr + 0xf) & ~0xf;
|
|
lp = (pcnet_priv_t *) addr;
|
|
}
|
|
|
|
lp->init_block.mode = cpu_to_le16 (0x0000);
|
|
lp->init_block.filter[0] = 0x00000000;
|
|
lp->init_block.filter[1] = 0x00000000;
|
|
|
|
/*
|
|
* Initialize the Rx ring.
|
|
*/
|
|
lp->cur_rx = 0;
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
lp->rx_ring[i].base = PCI_TO_MEM_LE (dev, lp->rx_buf[i]);
|
|
lp->rx_ring[i].buf_length = cpu_to_le16 (-PKT_BUF_SZ);
|
|
lp->rx_ring[i].status = cpu_to_le16 (0x8000);
|
|
PCNET_DEBUG1
|
|
("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n", i,
|
|
lp->rx_ring[i].base, lp->rx_ring[i].buf_length,
|
|
lp->rx_ring[i].status);
|
|
}
|
|
|
|
/*
|
|
* Initialize the Tx ring. The Tx buffer address is filled in as
|
|
* needed, but we do need to clear the upper ownership bit.
|
|
*/
|
|
lp->cur_tx = 0;
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
lp->tx_ring[i].base = 0;
|
|
lp->tx_ring[i].status = 0;
|
|
}
|
|
|
|
/*
|
|
* Setup Init Block.
|
|
*/
|
|
PCNET_DEBUG1 ("Init block at 0x%p: MAC", &lp->init_block);
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
lp->init_block.phys_addr[i] = dev->enetaddr[i];
|
|
PCNET_DEBUG1 (" %02x", lp->init_block.phys_addr[i]);
|
|
}
|
|
|
|
lp->init_block.tlen_rlen = cpu_to_le16 (TX_RING_LEN_BITS |
|
|
RX_RING_LEN_BITS);
|
|
lp->init_block.rx_ring = PCI_TO_MEM_LE (dev, lp->rx_ring);
|
|
lp->init_block.tx_ring = PCI_TO_MEM_LE (dev, lp->tx_ring);
|
|
|
|
PCNET_DEBUG1 ("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
|
|
lp->init_block.tlen_rlen,
|
|
lp->init_block.rx_ring, lp->init_block.tx_ring);
|
|
|
|
/*
|
|
* Tell the controller where the Init Block is located.
|
|
*/
|
|
addr = PCI_TO_MEM (dev, &lp->init_block);
|
|
pcnet_write_csr (dev, 1, addr & 0xffff);
|
|
pcnet_write_csr (dev, 2, (addr >> 16) & 0xffff);
|
|
|
|
pcnet_write_csr (dev, 4, 0x0915);
|
|
pcnet_write_csr (dev, 0, 0x0001); /* start */
|
|
|
|
/* Wait for Init Done bit */
|
|
for (i = 10000; i > 0; i--) {
|
|
if (pcnet_read_csr (dev, 0) & 0x0100)
|
|
break;
|
|
udelay (10);
|
|
}
|
|
if (i <= 0) {
|
|
printf ("%s: TIMEOUT: controller init failed\n", dev->name);
|
|
pcnet_reset (dev);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Finally start network controller operation.
|
|
*/
|
|
pcnet_write_csr (dev, 0, 0x0002);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcnet_send (struct eth_device *dev, volatile void *packet,
|
|
int pkt_len)
|
|
{
|
|
int i, status;
|
|
struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx];
|
|
|
|
PCNET_DEBUG2 ("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len,
|
|
packet);
|
|
|
|
/* Wait for completion by testing the OWN bit */
|
|
for (i = 1000; i > 0; i--) {
|
|
status = le16_to_cpu (entry->status);
|
|
if ((status & 0x8000) == 0)
|
|
break;
|
|
udelay (100);
|
|
PCNET_DEBUG2 (".");
|
|
}
|
|
if (i <= 0) {
|
|
printf ("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
|
|
dev->name, lp->cur_tx, status);
|
|
pkt_len = 0;
|
|
goto failure;
|
|
}
|
|
|
|
/*
|
|
* Setup Tx ring. Caution: the write order is important here,
|
|
* set the status with the "ownership" bits last.
|
|
*/
|
|
status = 0x8300;
|
|
entry->length = le16_to_cpu (-pkt_len);
|
|
entry->misc = 0x00000000;
|
|
entry->base = PCI_TO_MEM_LE (dev, packet);
|
|
entry->status = le16_to_cpu (status);
|
|
|
|
/* Trigger an immediate send poll. */
|
|
pcnet_write_csr (dev, 0, 0x0008);
|
|
|
|
failure:
|
|
if (++lp->cur_tx >= TX_RING_SIZE)
|
|
lp->cur_tx = 0;
|
|
|
|
PCNET_DEBUG2 ("done\n");
|
|
return pkt_len;
|
|
}
|
|
|
|
static int pcnet_recv (struct eth_device *dev)
|
|
{
|
|
struct pcnet_rx_head *entry;
|
|
int pkt_len = 0;
|
|
u16 status;
|
|
|
|
while (1) {
|
|
entry = &lp->rx_ring[lp->cur_rx];
|
|
/*
|
|
* If we own the next entry, it's a new packet. Send it up.
|
|
*/
|
|
if (((status = le16_to_cpu (entry->status)) & 0x8000) != 0) {
|
|
break;
|
|
}
|
|
status >>= 8;
|
|
|
|
if (status != 0x03) { /* There was an error. */
|
|
|
|
printf ("%s: Rx%d", dev->name, lp->cur_rx);
|
|
PCNET_DEBUG1 (" (status=0x%x)", status);
|
|
if (status & 0x20)
|
|
printf (" Frame");
|
|
if (status & 0x10)
|
|
printf (" Overflow");
|
|
if (status & 0x08)
|
|
printf (" CRC");
|
|
if (status & 0x04)
|
|
printf (" Fifo");
|
|
printf (" Error\n");
|
|
entry->status &= le16_to_cpu (0x03ff);
|
|
|
|
} else {
|
|
|
|
pkt_len =
|
|
(le32_to_cpu (entry->msg_length) & 0xfff) - 4;
|
|
if (pkt_len < 60) {
|
|
printf ("%s: Rx%d: invalid packet length %d\n", dev->name, lp->cur_rx, pkt_len);
|
|
} else {
|
|
NetReceive (lp->rx_buf[lp->cur_rx], pkt_len);
|
|
PCNET_DEBUG2 ("Rx%d: %d bytes from 0x%p\n",
|
|
lp->cur_rx, pkt_len,
|
|
lp->rx_buf[lp->cur_rx]);
|
|
}
|
|
}
|
|
entry->status |= cpu_to_le16 (0x8000);
|
|
|
|
if (++lp->cur_rx >= RX_RING_SIZE)
|
|
lp->cur_rx = 0;
|
|
}
|
|
return pkt_len;
|
|
}
|
|
|
|
static void pcnet_halt (struct eth_device *dev)
|
|
{
|
|
int i;
|
|
|
|
PCNET_DEBUG1 ("%s: pcnet_halt...\n", dev->name);
|
|
|
|
/* Reset the PCnet controller */
|
|
pcnet_reset (dev);
|
|
|
|
/* Wait for Stop bit */
|
|
for (i = 1000; i > 0; i--) {
|
|
if (pcnet_read_csr (dev, 0) & 0x4)
|
|
break;
|
|
udelay (10);
|
|
}
|
|
if (i <= 0) {
|
|
printf ("%s: TIMEOUT: controller reset failed\n", dev->name);
|
|
}
|
|
}
|