u-boot/board/AndesTech/adp-ae3xx/adp-ae3xx.c
rick be71a179bd nds32: eth: Support ftmac100 DM.
Support Andestech eth ftmac100 device tree flow on AG101P/AE3XX platform.
Verification:
 Boot linux kernel via dhcp and bootm ok.

 NDS32 # setenv bootm_size 0x2000000;setenv fdt_high 0x1f00000;
 NDS32 # dhcp 0x600000 10.0.4.97:boomimage-310y-ae300-spi.bin
 BOOTP broadcast 1
 BOOTP broadcast 2
 BOOTP broadcast 3
 BOOTP broadcast 4
 DHCP client bound to address 10.0.4.178 (4899 ms)
	Using mac@e0100000 device
	TFTP from server 10.0.4.97; our IP address is 10.0.4.178
	Filename 'boomimage-310y-ae300-spi.bin'.
	Load address: 0x600000
	Loading: #################################################################
	         #################################################################
	         #################################################################
...
...
	         ###################################
	         233.4 KiB/s
					 done
					 Bytes transferred = 13872076 (d3abcc hex)
	NDS32 # dhcp 0x2000000 10.0.4.97:ae300.dtb
	BOOTP broadcast 1
	BOOTP broadcast 2
	BOOTP broadcast 3
	BOOTP broadcast 4
	DHCP client bound to address 10.0.4.178 (4592 ms)
	Using mac@e0100000 device
	TFTP from server 10.0.4.97; our IP address is 10.0.4.178
	Filename 'ae300.dtb'.
	Load address: 0x2000000
	Loading: #
	         82 KiB/s
					 done
					 Bytes transferred = 2378 (94a hex)
	NDS32 # bootm 0x600000 - 0x2000000
	 Image Name:
	 Created:      2017-03-22   6:52:03 UTC
	 Image Type:   NDS32 Linux Kernel Image (uncompressed)
	 Data Size:    13872012 Bytes = 13.2 MiB
	 Load Address: 0000c000
	 Entry Point:  0000c000
	 Verifying Checksum ... OK
	 Booting using the fdt blob at 0x2000000
	 Loading Kernel Image ... OK
	 Loading Device Tree to 01efc000, end 01eff949 ... OK
	 Linux version 3.10.102-20375-gb0034c1-dirty (rick@app09)
	(gcc version 4.9.3 (2016-07-06_nds32le-linux-glibc-v3_experimental) )
  #293 PREEMPT Wed Mar 22 14:49:28 CST 2017
	CPU: NDS32 N13, AndesCore ID(wb), CPU_VER 0x0d11103f(id 13, rev 17, cfg 4159)
...
...
Signed-off-by: rick <rick@andestech.com>
2017-05-23 13:48:27 +08:00

86 lines
1.9 KiB
C

/*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#if defined(CONFIG_FTMAC100) && !defined(CONFIG_DM_ETH)
#include <netdev.h>
#endif
#include <linux/io.h>
#include <faraday/ftsdc010.h>
#include <faraday/ftsmc020.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Miscellaneous platform dependent initializations
*/
int board_init(void)
{
/*
* refer to BOOT_PARAMETER_PA_BASE within
* "linux/arch/nds32/include/asm/misc_spec.h"
*/
printf("Board: %s\n" , CONFIG_SYS_BOARD);
gd->bd->bi_arch_number = MACH_TYPE_ADPAE3XX;
gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
return 0;
}
int dram_init(void)
{
unsigned long sdram_base = PHYS_SDRAM_0;
unsigned long expected_size = PHYS_SDRAM_0_SIZE + PHYS_SDRAM_1_SIZE;
unsigned long actual_size;
actual_size = get_ram_size((void *)sdram_base, expected_size);
gd->ram_size = actual_size;
if (expected_size != actual_size) {
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
}
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_0;
gd->bd->bi_dram[0].size = PHYS_SDRAM_0_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_1;
gd->bd->bi_dram[1].size = PHYS_SDRAM_1_SIZE;
return 0;
}
#if defined(CONFIG_FTMAC100) && !defined(CONFIG_DM_ETH)
int board_eth_init(bd_t *bd)
{
return ftmac100_initialize(bd);
}
#endif
ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
{
if (banknum == 0) { /* non-CFI boot flash */
info->portwidth = FLASH_CFI_8BIT;
info->chipwidth = FLASH_CFI_BY8;
info->interface = FLASH_CFI_X8;
return 1;
} else {
return 0;
}
}
int board_mmc_init(bd_t *bis)
{
#ifndef CONFIG_DM_MMC
#ifdef CONFIG_FTSDC010
ftsdc010_mmc_init(0);
#endif
#endif
return 0;
}