Cooper Jr., Franklin df5ec72d7a ARM: dts: keystone-k2g: Remove skeleton.dtsi ... Adding the unit address to the memory node was causing the below error: Warning (reg_format): "reg" property in /memory has invalid length (8 bytes) (#address-cells == 2, #size-cells == 2) Further debugging showed that this was due to the memory node added by default to skeleton.dtsi which was being included in keystone-k2g.dtsi. Adding a missing node was all that was needed to remove this deprecated dtsi file from the SoC dtsi. With skeleton.dtsi removed the dtc compiler no longer complained about including the unit address for the memory node. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>		2017-07-10 14:26:00 -04:00
..
cpu	arm64: use psci reset on snapdragon	2017-07-06 16:17:13 -04:00
dts	ARM: dts: keystone-k2g: Remove skeleton.dtsi	2017-07-10 14:26:00 -04:00
imx-common	drivers: pci: imx: add imx_pcie_remove function	2017-05-31 10:09:03 +02:00
include	ti816x: Enable ethernet support	2017-06-28 11:43:39 -04:00
lib	Revert "armv7m: Disable D-cache when booting nommu(ARMv7M) Linux kernel"	2017-06-29 21:18:48 -04:00
mach-aspeed	aspeed: Refactor SCU to use consistent mask & shift	2017-05-08 11:57:35 -04:00
mach-at91	ARM: atmel: Rename MA5D4EVK	2017-06-29 13:30:27 -04:00
mach-bcm283x	bcm2835_wdt: support for the BCM2835/2836 watchdog	2017-05-09 20:30:08 -04:00
mach-davinci	common: arm: davinci: Move header file out of common	2017-06-05 12:31:23 -04:00
mach-exynos	Kconfig: Finish migration of hashing commands	2017-05-31 19:38:14 -04:00
mach-highbank	ARM: highbank: move SoC sources to mach-highbank	2015-02-21 08:23:51 -05:00
mach-integrator	integrator: switch to DM serial port	2015-08-12 20:47:49 -04:00
mach-keystone	ARM: k2g: Program DDRPHY_DATX8 registers via mask and value variables	2017-07-10 14:25:57 -04:00
mach-kirkwood	Kconfig: Add a CONFIG_IDE option	2017-05-22 12:45:27 -04:00
mach-meson	board_f: Drop setup_dram_config() wrapper	2017-04-05 16:36:51 -04:00
mach-mvebu	dm: Rename dev_addr..() functions	2017-06-01 07:03:01 -06:00
mach-omap2	ti816x: Add additional boot device detection logic	2017-06-23 10:38:03 -04:00
mach-orion5x	board_f: Drop setup_dram_config() wrapper	2017-04-05 16:36:51 -04:00
mach-rmobile	mmc: sh_sdhi: Add MMC version 5.0 support	2017-06-09 20:25:16 +09:00
mach-rockchip	rockchip: rk3288: Allow setting up clocks in U-Boot proper	2017-06-09 13:45:34 -06:00
mach-s5pc1xx	arm: s5pc1xx: move SoC to mach-s5pc1xx	2015-11-30 17:17:01 +09:00
mach-snapdragon	dm: Rename dev_addr..() functions	2017-06-01 07:03:01 -06:00
mach-socfpga	Convert CONFIG_SPL_BOARD_INIT to Kconfig	2017-05-22 07:29:48 -04:00
mach-sti	board: Add STMicroelectronics STiH410-B2260 support	2017-03-14 20:40:21 -04:00
mach-stm32	stm32: Correct positioning of declaration	2017-07-06 16:17:17 -04:00
mach-sunxi	sunxi: add LPDDR3 timing from stock boot0	2017-06-08 22:37:55 +05:30
mach-tegra	ARM: tegra: remove Whistler support	2017-06-12 13:03:50 -07:00
mach-uniphier	ARM: uniphier: fix various sparse warnings	2017-06-25 06:06:09 +09:00
mach-versatile	arm: Remove versatileab board	2015-09-11 15:01:25 -04:00
mach-zynq	arm: zynq: Add Kconfig option for any DDR specific initialization	2017-06-20 16:41:44 +02:00
thumb1/include/asm/proc-armv	arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD	2015-11-10 15:03:48 +01:00
config.mk	arm: Always keep the dtb section on objcopy	2017-06-05 14:13:11 -04:00
Kconfig	ARM: make memset and memcpy prompt message more clearly	2017-06-29 09:51:06 -04:00
Kconfig.debug
Makefile	ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig	2017-04-27 16:49:08 -04:00