Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-07 13:44:29 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/gateworks/gw_ventana/gw_ventana.c
Simon Glass e7dcf5645f env: Drop environment.h header file where not needed 
This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00

1376 lines
36 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2013 Gateworks Corporation
*
* Author: Tim Harvey <tharvey@gateworks.com>
*/
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/sata.h>
#include <asm/mach-imx/spi.h>
#include <asm/mach-imx/video.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <dm.h>
#include <dm/platform_data/serial_mxc.h>
#include <env.h>
#include <hwconfig.h>
#include <i2c.h>
#include <fdt_support.h>
#include <fsl_esdhc_imx.h>
#include <jffs2/load_kernel.h>
#include <linux/ctype.h>
#include <miiphy.h>
#include <mtd_node.h>
#include <netdev.h>
#include <pci.h>
#include <power/pmic.h>
#include <power/ltc3676_pmic.h>
#include <power/pfuze100_pmic.h>
#include <fdt_support.h>
#include <jffs2/load_kernel.h>
#include <spi_flash.h>
#include "gsc.h"
#include "common.h"
DECLARE_GLOBAL_DATA_PTR;
/*
* EEPROM board info struct populated by read_eeprom so that we only have to
* read it once.
*/
struct ventana_board_info ventana_info;
static int board_type;
/* ENET */
static iomux_v3_cfg_t const enet_pads[] = {
IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK |
MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL |
MUX_PAD_CTRL(ENET_PAD_CTRL)),
/* PHY nRST */
IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | DIO_PAD_CFG),
};
#ifdef CONFIG_CMD_NAND
static iomux_v3_cfg_t const nfc_pads[] = {
IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static void setup_gpmi_nand(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
/* config gpmi nand iomux */
SETUP_IOMUX_PADS(nfc_pads);
/* config gpmi and bch clock to 100 MHz */
clrsetbits_le32(&mxc_ccm->cs2cdr,
MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
/* enable gpmi and bch clock gating */
setbits_le32(&mxc_ccm->CCGR4,
MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
/* enable apbh clock gating */
setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
}
#endif
static void setup_iomux_enet(int gpio)
{
SETUP_IOMUX_PADS(enet_pads);
/* toggle PHY_RST# */
gpio_request(gpio, "phy_rst#");
gpio_direction_output(gpio, 0);
mdelay(10);
gpio_set_value(gpio, 1);
mdelay(100);
}
#ifdef CONFIG_USB_EHCI_MX6
static iomux_v3_cfg_t const usb_pads[] = {
IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | DIO_PAD_CFG),
IOMUX_PADS(PAD_KEY_COL4__USB_OTG_OC | DIO_PAD_CFG),
/* OTG PWR */
IOMUX_PADS(PAD_EIM_D22__GPIO3_IO22 | DIO_PAD_CFG),
};
int board_ehci_hcd_init(int port)
{
int gpio;
SETUP_IOMUX_PADS(usb_pads);
/* Reset USB HUB */
switch (board_type) {
case GW53xx:
case GW552x:
case GW5906:
gpio = (IMX_GPIO_NR(1, 9));
break;
case GW54proto:
case GW54xx:
gpio = (IMX_GPIO_NR(1, 16));
break;
default:
return 0;
}
/* request and toggle hub rst */
gpio_request(gpio, "usb_hub_rst#");
gpio_direction_output(gpio, 0);
mdelay(2);
gpio_set_value(gpio, 1);
return 0;
}
int board_ehci_power(int port, int on)
{
/* enable OTG VBUS */
if (!port && board_type < GW_UNKNOWN) {
if (gpio_cfg[board_type].otgpwr_en)
gpio_set_value(gpio_cfg[board_type].otgpwr_en, on);
}
return 0;
}
#endif /* CONFIG_USB_EHCI_MX6 */
#ifdef CONFIG_MXC_SPI
iomux_v3_cfg_t const ecspi1_pads[] = {
/* SS1 */
IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(SPI_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
};
int board_spi_cs_gpio(unsigned bus, unsigned cs)
{
return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -1;
}
static void setup_spi(void)
{
gpio_request(IMX_GPIO_NR(3, 19), "spi_cs");
gpio_direction_output(IMX_GPIO_NR(3, 19), 1);
SETUP_IOMUX_PADS(ecspi1_pads);
}
#endif
/* configure eth0 PHY board-specific LED behavior */
int board_phy_config(struct phy_device *phydev)
{
unsigned short val;
/* Marvel 88E1510 */
if (phydev->phy_id == 0x1410dd1) {
/*
* Page 3, Register 16: LED[2:0] Function Control Register
* LED[0] (SPD:Amber) R16_3.3:0 to 0111: on-GbE link
* LED[1] (LNK:Green) R16_3.7:4 to 0001: on-link, blink-activity
*/
phy_write(phydev, MDIO_DEVAD_NONE, 22, 3);
val = phy_read(phydev, MDIO_DEVAD_NONE, 16);
val &= 0xff00;
val |= 0x0017;
phy_write(phydev, MDIO_DEVAD_NONE, 16, val);
phy_write(phydev, MDIO_DEVAD_NONE, 22, 0);
}
/* TI DP83867 */
else if (phydev->phy_id == 0x2000a231) {
/* configure register 0x170 for ref CLKOUT */
phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x001f);
phy_write(phydev, MDIO_DEVAD_NONE, 14, 0x0170);
phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x401f);
val = phy_read(phydev, MDIO_DEVAD_NONE, 14);
val &= ~0x1f00;
val |= 0x0b00; /* chD tx clock*/
phy_write(phydev, MDIO_DEVAD_NONE, 14, val);
}
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
#ifdef CONFIG_MV88E61XX_SWITCH
int mv88e61xx_hw_reset(struct phy_device *phydev)
{
struct mii_dev *bus = phydev->bus;
/* GPIO[0] output, CLK125 */
debug("enabling RGMII_REFCLK\n");
bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0,
0x1a /*MV_SCRATCH_MISC*/,
(1 << 15) | (0x62 /*MV_GPIO_DIR*/ << 8) | 0xfe);
bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0,
0x1a /*MV_SCRATCH_MISC*/,
(1 << 15) | (0x68 /*MV_GPIO01_CNTL*/ << 8) | 7);
/* RGMII delay - Physical Control register bit[15:14] */
debug("setting port%d RGMII rx/tx delay\n", CONFIG_MV88E61XX_CPU_PORT);
/* forced 1000mbps full-duplex link */
bus->write(bus, 0x10 + CONFIG_MV88E61XX_CPU_PORT, 0, 1, 0xc0fe);
phydev->autoneg = AUTONEG_DISABLE;
phydev->speed = SPEED_1000;
phydev->duplex = DUPLEX_FULL;
/* LED configuration: 7:4-green (8=Activity) 3:0 amber (8=Link) */
bus->write(bus, 0x10, 0, 0x16, 0x8088);
bus->write(bus, 0x11, 0, 0x16, 0x8088);
bus->write(bus, 0x12, 0, 0x16, 0x8088);
bus->write(bus, 0x13, 0, 0x16, 0x8088);
return 0;
}
#endif // CONFIG_MV88E61XX_SWITCH
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_FEC_MXC
struct ventana_board_info *info = &ventana_info;
if (test_bit(EECONFIG_ETH0, info->config)) {
setup_iomux_enet(GP_PHY_RST);
cpu_eth_init(bis);
}
#endif
#ifdef CONFIG_E1000
e1000_initialize(bis);
#endif
#ifdef CONFIG_CI_UDC
/* For otg ethernet*/
usb_eth_initialize(bis);
#endif
/* default to the first detected enet dev */
if (!env_get("ethprime")) {
struct eth_device *dev = eth_get_dev_by_index(0);
if (dev) {
env_set("ethprime", dev->name);
printf("set ethprime to %s\n", env_get("ethprime"));
}
}
return 0;
}
#if defined(CONFIG_VIDEO_IPUV3)
static void enable_hdmi(struct display_info_t const *dev)
{
imx_enable_hdmi_phy();
}
static int detect_i2c(struct display_info_t const *dev)
{
return i2c_set_bus_num(dev->bus) == 0 &&
i2c_probe(dev->addr) == 0;
}
static void enable_lvds(struct display_info_t const *dev)
{
struct iomuxc *iomux = (struct iomuxc *)
IOMUXC_BASE_ADDR;
/* set CH0 data width to 24bit (IOMUXC_GPR2:5 0=18bit, 1=24bit) */
u32 reg = readl(&iomux->gpr[2]);
reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
writel(reg, &iomux->gpr[2]);
/* Enable Backlight */
gpio_request(IMX_GPIO_NR(1, 10), "bklt_gpio");
gpio_direction_output(IMX_GPIO_NR(1, 10), 0);
gpio_request(IMX_GPIO_NR(1, 18), "bklt_en");
SETUP_IOMUX_PAD(PAD_SD1_CMD__GPIO1_IO18 | DIO_PAD_CFG);
gpio_direction_output(IMX_GPIO_NR(1, 18), 1);
}
struct display_info_t const displays[] = {{
/* HDMI Output */
.bus = -1,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = detect_hdmi,
.enable = enable_hdmi,
.mode = {
.name = "HDMI",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
/* Freescale MXC-LVDS1: HannStar HSD100PXN1-A00 w/ egalx_ts cont */
.bus = 2,
.addr = 0x4,
.pixfmt = IPU_PIX_FMT_LVDS666,
.detect = detect_i2c,
.enable = enable_lvds,
.mode = {
.name = "Hannstar-XGA",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
/* DLC700JMG-T-4 */
.bus = 2,
.addr = 0x38,
.detect = NULL,
.enable = enable_lvds,
.pixfmt = IPU_PIX_FMT_LVDS666,
.mode = {
.name = "DLC700JMGT4",
.refresh = 60,
.xres = 1024, /* 1024x600active pixels */
.yres = 600,
.pixclock = 15385, /* 64MHz */
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
/* DLC800FIG-T-3 */
.bus = 2,
.addr = 0x14,
.detect = NULL,
.enable = enable_lvds,
.pixfmt = IPU_PIX_FMT_LVDS666,
.mode = {
.name = "DLC800FIGT3",
.refresh = 60,
.xres = 1024, /* 1024x768 active pixels */
.yres = 768,
.pixclock = 15385, /* 64MHz */
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} }, {
.bus = 2,
.addr = 0x5d,
.detect = detect_i2c,
.enable = enable_lvds,
.pixfmt = IPU_PIX_FMT_LVDS666,
.mode = {
.name = "Z101WX01",
.refresh = 60,
.xres = 1280,
.yres = 800,
.pixclock = 15385, /* 64MHz */
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
}
},
};
size_t display_count = ARRAY_SIZE(displays);
static void setup_display(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
int reg;
enable_ipu_clock();
imx_setup_hdmi();
/* Turn on LDB0,IPU,IPU DI0 clocks */
reg = __raw_readl(&mxc_ccm->CCGR3);
reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
writel(reg, &mxc_ccm->CCGR3);
/* set LDB0, LDB1 clk select to 011/011 */
reg = readl(&mxc_ccm->cs2cdr);
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
|MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
|(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->cs2cdr);
reg = readl(&mxc_ccm->cscmr2);
reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
writel(reg, &mxc_ccm->cscmr2);
reg = readl(&mxc_ccm->chsccdr);
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
<<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->chsccdr);
reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
|IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
|IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
|IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
|IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
|IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
|IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
|IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
|IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
writel(reg, &iomux->gpr[2]);
reg = readl(&iomux->gpr[3]);
reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
<<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
writel(reg, &iomux->gpr[3]);
/* LVDS Backlight GPIO on LVDS connector - output low */
SETUP_IOMUX_PAD(PAD_SD2_CLK__GPIO1_IO10 | DIO_PAD_CFG);
gpio_direction_output(IMX_GPIO_NR(1, 10), 0);
}
#endif /* CONFIG_VIDEO_IPUV3 */
/* setup board specific PMIC */
int power_init_board(void)
{
setup_pmic();
return 0;
}
#if defined(CONFIG_CMD_PCI)
int imx6_pcie_toggle_reset(void)
{
if (board_type < GW_UNKNOWN) {
uint pin = gpio_cfg[board_type].pcie_rst;
gpio_request(pin, "pci_rst#");
gpio_direction_output(pin, 0);
mdelay(50);
gpio_direction_output(pin, 1);
}
return 0;
}
/*
* Most Ventana boards have a PLX PEX860x PCIe switch onboard and use its
* GPIO's as PERST# signals for its downstream ports - configure the GPIO's
* properly and assert reset for 100ms.
*/
#define MAX_PCI_DEVS 32
struct pci_dev {
pci_dev_t devfn;
unsigned short vendor;
unsigned short device;
unsigned short class;
unsigned short busno; /* subbordinate busno */
struct pci_dev *ppar;
};
struct pci_dev pci_devs[MAX_PCI_DEVS];
int pci_devno;
int pci_bridgeno;
void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev,
unsigned short vendor, unsigned short device,
unsigned short class)
{
int i;
u32 dw;
struct pci_dev *pdev = &pci_devs[pci_devno++];
debug("%s: %02d:%02d.%02d: %04x:%04x\n", __func__,
PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev), vendor, device);
/* store array of devs for later use in device-tree fixup */
pdev->devfn = dev;
pdev->vendor = vendor;
pdev->device = device;
pdev->class = class;
pdev->ppar = NULL;
if (class == PCI_CLASS_BRIDGE_PCI)
pdev->busno = ++pci_bridgeno;
else
pdev->busno = 0;
/* fixup RC - it should be 00:00.0 not 00:01.0 */
if (PCI_BUS(dev) == 0)
pdev->devfn = 0;
/* find dev's parent */
for (i = 0; i < pci_devno; i++) {
if (pci_devs[i].busno == PCI_BUS(pdev->devfn)) {
pdev->ppar = &pci_devs[i];
break;
}
}
/* assert downstream PERST# */
if (vendor == PCI_VENDOR_ID_PLX &&
(device & 0xfff0) == 0x8600 &&
PCI_DEV(dev) == 0 && PCI_FUNC(dev) == 0) {
debug("configuring PLX 860X downstream PERST#\n");
pci_hose_read_config_dword(hose, dev, 0x62c, &dw);
dw |= 0xaaa8; /* GPIO1-7 outputs */
pci_hose_write_config_dword(hose, dev, 0x62c, dw);
pci_hose_read_config_dword(hose, dev, 0x644, &dw);
dw |= 0xfe; /* GPIO1-7 output high */
pci_hose_write_config_dword(hose, dev, 0x644, dw);
mdelay(100);
}
}
#endif /* CONFIG_CMD_PCI */
#ifdef CONFIG_SERIAL_TAG
/*
* called when setting up ATAGS before booting kernel
* populate serialnum from the following (in order of priority):
* serial# env var
* eeprom
*/
void get_board_serial(struct tag_serialnr *serialnr)
{
char *serial = env_get("serial#");
if (serial) {
serialnr->high = 0;
serialnr->low = simple_strtoul(serial, NULL, 10);
} else if (ventana_info.model[0]) {
serialnr->high = 0;
serialnr->low = ventana_info.serial;
} else {
serialnr->high = 0;
serialnr->low = 0;
}
}
#endif
/*
* Board Support
*/
int board_early_init_f(void)
{
setup_iomux_uart();
#if defined(CONFIG_VIDEO_IPUV3)
setup_display();
#endif
return 0;
}
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
return 0;
}
int board_init(void)
{
struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
clrsetbits_le32(&iomuxc_regs->gpr[1],
IOMUXC_GPR1_OTG_ID_MASK,
IOMUXC_GPR1_OTG_ID_GPIO1);
/* address of linux boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
/* read Gateworks EEPROM into global struct (used later) */
setup_ventana_i2c(0);
board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
#ifdef CONFIG_CMD_NAND
if (gpio_cfg[board_type].nand)
setup_gpmi_nand();
#endif
#ifdef CONFIG_MXC_SPI
setup_spi();
#endif
setup_ventana_i2c(1);
setup_ventana_i2c(2);
#ifdef CONFIG_SATA
setup_sata();
#endif
setup_iomux_gpio(board_type, &ventana_info);
return 0;
}
#if defined(CONFIG_DISPLAY_BOARDINFO_LATE)
/*
* called during late init (after relocation and after board_init())
* by virtue of CONFIG_DISPLAY_BOARDINFO_LATE as we needed i2c initialized and
* EEPROM read.
*/
int checkboard(void)
{
struct ventana_board_info *info = &ventana_info;
unsigned char buf[4];
const char *p;
int quiet; /* Quiet or minimal output mode */
quiet = 0;
p = env_get("quiet");
if (p)
quiet = simple_strtol(p, NULL, 10);
else
env_set("quiet", "0");
puts("\nGateworks Corporation Copyright 2014\n");
if (info->model[0]) {
printf("Model: %s\n", info->model);
printf("MFGDate: %02x-%02x-%02x%02x\n",
info->mfgdate[0], info->mfgdate[1],
info->mfgdate[2], info->mfgdate[3]);
printf("Serial:%d\n", info->serial);
} else {
puts("Invalid EEPROM - board will not function fully\n");
}
if (quiet)
return 0;
/* Display GSC firmware revision/CRC/status */
gsc_info(0);
/* Display RTC */
if (!gsc_i2c_read(GSC_RTC_ADDR, 0x00, 1, buf, 4)) {
printf("RTC: %d\n",
buf[0] | buf[1]<<8 | buf[2]<<16 | buf[3]<<24);
}
return 0;
}
#endif
#ifdef CONFIG_CMD_BMODE
/*
* BOOT_CFG1, BOOT_CFG2, BOOT_CFG3, BOOT_CFG4
* see Table 8-11 and Table 5-9
* BOOT_CFG1[7] = 1 (boot from NAND)
* BOOT_CFG1[5] = 0 - raw NAND
* BOOT_CFG1[4] = 0 - default pad settings
* BOOT_CFG1[3:2] = 00 - devices = 1
* BOOT_CFG1[1:0] = 00 - Row Address Cycles = 3
* BOOT_CFG2[4:3] = 00 - Boot Search Count = 2
* BOOT_CFG2[2:1] = 01 - Pages In Block = 64
* BOOT_CFG2[0] = 0 - Reset time 12ms
*/
static const struct boot_mode board_boot_modes[] = {
/* NAND: 64pages per block, 3 row addr cycles, 2 copies of FCB/DBBT */
{ "nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00) },
{ "emmc2", MAKE_CFGVAL(0x60, 0x48, 0x00, 0x00) }, /* GW5600 */
{ "emmc3", MAKE_CFGVAL(0x60, 0x50, 0x00, 0x00) }, /* GW5903/4/5 */
{ NULL, 0 },
};
#endif
/* late init */
int misc_init_r(void)
{
struct ventana_board_info *info = &ventana_info;
char buf[256];
int i;
/* set env vars based on EEPROM data */
if (ventana_info.model[0]) {
char str[16], fdt[36];
char *p;
const char *cputype = "";
/*
* FDT name will be prefixed with CPU type. Three versions
* will be created each increasingly generic and bootloader
* env scripts will try loading each from most specific to
* least.
*/
if (is_cpu_type(MXC_CPU_MX6Q) ||
is_cpu_type(MXC_CPU_MX6D))
cputype = "imx6q";
else if (is_cpu_type(MXC_CPU_MX6DL) ||
is_cpu_type(MXC_CPU_MX6SOLO))
cputype = "imx6dl";
env_set("soctype", cputype);
if (8 << (ventana_info.nand_flash_size-1) >= 2048)
env_set("flash_layout", "large");
else
env_set("flash_layout", "normal");
memset(str, 0, sizeof(str));
for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++)
str[i] = tolower(info->model[i]);
env_set("model", str);
if (!env_get("fdt_file")) {
sprintf(fdt, "%s-%s.dtb", cputype, str);
env_set("fdt_file", fdt);
}
p = strchr(str, '-');
if (p) {
*p++ = 0;
env_set("model_base", str);
sprintf(fdt, "%s-%s.dtb", cputype, str);
env_set("fdt_file1", fdt);
if (board_type != GW551x &&
board_type != GW552x &&
board_type != GW553x &&
board_type != GW560x)
str[4] = 'x';
str[5] = 'x';
str[6] = 0;
sprintf(fdt, "%s-%s.dtb", cputype, str);
env_set("fdt_file2", fdt);
}
/* initialize env from EEPROM */
if (test_bit(EECONFIG_ETH0, info->config) &&
!env_get("ethaddr")) {
eth_env_set_enetaddr("ethaddr", info->mac0);
}
if (test_bit(EECONFIG_ETH1, info->config) &&
!env_get("eth1addr")) {
eth_env_set_enetaddr("eth1addr", info->mac1);
}
/* board serial-number */
sprintf(str, "%6d", info->serial);
env_set("serial#", str);
/* memory MB */
sprintf(str, "%d", (int) (gd->ram_size >> 20));
env_set("mem_mb", str);
}
/* Set a non-initialized hwconfig based on board configuration */
if (!strcmp(env_get("hwconfig"), "_UNKNOWN_")) {
buf[0] = 0;
if (gpio_cfg[board_type].rs232_en)
strcat(buf, "rs232;");
for (i = 0; i < gpio_cfg[board_type].dio_num; i++) {
char buf1[32];
sprintf(buf1, "dio%d:mode=gpio;", i);
if (strlen(buf) + strlen(buf1) < sizeof(buf))
strcat(buf, buf1);
}
env_set("hwconfig", buf);
}
/* setup baseboard specific GPIO based on board and env */
setup_board_gpio(board_type, info);
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
/* disable boot watchdog */
gsc_boot_wd_disable();
return 0;
}
#ifdef CONFIG_OF_BOARD_SETUP
static int ft_sethdmiinfmt(void *blob, char *mode)
{
int off;
if (!mode)
return -EINVAL;
off = fdt_node_offset_by_compatible(blob, -1, "nxp,tda1997x");
if (off < 0)
return off;
if (0 == strcasecmp(mode, "yuv422bt656")) {
u8 cfg[] = { 0x00, 0x00, 0x00, 0x82, 0x81, 0x00,
0x00, 0x00, 0x00 };
mode = "422_ccir";
fdt_setprop(blob, off, "vidout_fmt", mode, strlen(mode) + 1);
fdt_setprop_u32(blob, off, "vidout_trc", 1);
fdt_setprop_u32(blob, off, "vidout_blc", 1);
fdt_setprop(blob, off, "vidout_portcfg", cfg, sizeof(cfg));
printf(" set HDMI input mode to %s\n", mode);
} else if (0 == strcasecmp(mode, "yuv422smp")) {
u8 cfg[] = { 0x00, 0x00, 0x00, 0x88, 0x87, 0x00,
0x82, 0x81, 0x00 };
mode = "422_smp";
fdt_setprop(blob, off, "vidout_fmt", mode, strlen(mode) + 1);
fdt_setprop_u32(blob, off, "vidout_trc", 0);
fdt_setprop_u32(blob, off, "vidout_blc", 0);
fdt_setprop(blob, off, "vidout_portcfg", cfg, sizeof(cfg));
printf(" set HDMI input mode to %s\n", mode);
} else {
return -EINVAL;
}
return 0;
}
#if defined(CONFIG_CMD_PCI)
#define PCI_ID(x) ( \
(PCI_BUS(x->devfn)<<16)| \
(PCI_DEV(x->devfn)<<11)| \
(PCI_FUNC(x->devfn)<<8) \
)
int fdt_add_pci_node(void *blob, int par, struct pci_dev *dev)
{
uint32_t reg[5];
char node[32];
int np;
sprintf(node, "pcie@%d,%d,%d", PCI_BUS(dev->devfn),
PCI_DEV(dev->devfn), PCI_FUNC(dev->devfn));
np = fdt_subnode_offset(blob, par, node);
if (np >= 0)
return np;
np = fdt_add_subnode(blob, par, node);
if (np < 0) {
printf(" %s failed: no space\n", __func__);
return np;
}
memset(reg, 0, sizeof(reg));
reg[0] = cpu_to_fdt32(PCI_ID(dev));
fdt_setprop(blob, np, "reg", reg, sizeof(reg));
return np;
}
/* build a path of nested PCI devs for all bridges passed through */
int fdt_add_pci_path(void *blob, struct pci_dev *dev)
{
struct pci_dev *bridges[MAX_PCI_DEVS];
int k, np;
/* build list of parents */
np = fdt_node_offset_by_compatible(blob, -1, "fsl,imx6q-pcie");
if (np < 0)
return np;
k = 0;
while (dev) {
bridges[k++] = dev;
dev = dev->ppar;
};
/* now add them the to DT in reverse order */
while (k--) {
np = fdt_add_pci_node(blob, np, bridges[k]);
if (np < 0)
break;
}
return np;
}
/*
* The GW16082 has a hardware errata errata such that it's
* INTA/B/C/D are mis-mapped to its four slots (slot12-15). Because
* of this normal PCI interrupt swizzling will not work so we will
* provide an irq-map via device-tree.
*/
int fdt_fixup_gw16082(void *blob, int np, struct pci_dev *dev)
{
int len;
int host;
uint32_t imap_new[8*4*4];
const uint32_t *imap;
uint32_t irq[4];
uint32_t reg[4];
int i;
/* build irq-map based on host controllers map */
host = fdt_node_offset_by_compatible(blob, -1, "fsl,imx6q-pcie");
if (host < 0) {
printf(" %s failed: missing host\n", __func__);
return host;
}
/* use interrupt data from root complex's node */
imap = fdt_getprop(blob, host, "interrupt-map", &len);
if (!imap || len != 128) {
printf(" %s failed: invalid interrupt-map\n",
__func__);
return -FDT_ERR_NOTFOUND;
}
/* obtain irq's of host controller in pin order */
for (i = 0; i < 4; i++)
irq[(fdt32_to_cpu(imap[(i*8)+3])-1)%4] = imap[(i*8)+6];
/*
* determine number of swizzles necessary:
* For each bridge we pass through we need to swizzle
* the number of the slot we are on.
*/
struct pci_dev *d;
int b;
b = 0;
d = dev->ppar;
while(d && d->ppar) {
b += PCI_DEV(d->devfn);
d = d->ppar;
}
/* create new irq mappings for slots12-15
* <skt> <idsel> <slot> <skt-inta> <skt-intb>
* J3 AD28 12 INTD INTA
* J4 AD29 13 INTC INTD
* J5 AD30 14 INTB INTC
* J2 AD31 15 INTA INTB
*/
for (i = 0; i < 4; i++) {
/* addr matches bus:dev:func */
u32 addr = dev->busno << 16 | (12+i) << 11;
/* default cells from root complex */
memcpy(&imap_new[i*32], imap, 128);
/* first cell is PCI device address (BDF) */
imap_new[(i*32)+(0*8)+0] = cpu_to_fdt32(addr);
imap_new[(i*32)+(1*8)+0] = cpu_to_fdt32(addr);
imap_new[(i*32)+(2*8)+0] = cpu_to_fdt32(addr);
imap_new[(i*32)+(3*8)+0] = cpu_to_fdt32(addr);
/* third cell is pin */
imap_new[(i*32)+(0*8)+3] = cpu_to_fdt32(1);
imap_new[(i*32)+(1*8)+3] = cpu_to_fdt32(2);
imap_new[(i*32)+(2*8)+3] = cpu_to_fdt32(3);
imap_new[(i*32)+(3*8)+3] = cpu_to_fdt32(4);
/* sixth cell is relative interrupt */
imap_new[(i*32)+(0*8)+6] = irq[(15-(12+i)+b+0)%4];
imap_new[(i*32)+(1*8)+6] = irq[(15-(12+i)+b+1)%4];
imap_new[(i*32)+(2*8)+6] = irq[(15-(12+i)+b+2)%4];
imap_new[(i*32)+(3*8)+6] = irq[(15-(12+i)+b+3)%4];
}
fdt_setprop(blob, np, "interrupt-map", imap_new,
sizeof(imap_new));
reg[0] = cpu_to_fdt32(0xfff00);
reg[1] = 0;
reg[2] = 0;
reg[3] = cpu_to_fdt32(0x7);
fdt_setprop(blob, np, "interrupt-map-mask", reg, sizeof(reg));
fdt_setprop_cell(blob, np, "#interrupt-cells", 1);
fdt_setprop_string(blob, np, "device_type", "pci");
fdt_setprop_cell(blob, np, "#address-cells", 3);
fdt_setprop_cell(blob, np, "#size-cells", 2);
printf(" Added custom interrupt-map for GW16082\n");
return 0;
}
/* The sky2 GigE MAC obtains it's MAC addr from device-tree by default */
int fdt_fixup_sky2(void *blob, int np, struct pci_dev *dev)
{
char *tmp, *end;
char mac[16];
unsigned char mac_addr[6];
int j;
sprintf(mac, "eth1addr");
tmp = env_get(mac);
if (tmp) {
for (j = 0; j < 6; j++) {
mac_addr[j] = tmp ?
simple_strtoul(tmp, &end,16) : 0;
if (tmp)
tmp = (*end) ? end+1 : end;
}
fdt_setprop(blob, np, "local-mac-address", mac_addr,
sizeof(mac_addr));
printf(" Added mac addr for eth1\n");
return 0;
}
return -1;
}
/*
* PCI DT nodes must be nested therefore if we need to apply a DT fixup
* we will walk the PCI bus and add bridge nodes up to the device receiving
* the fixup.
*/
void ft_board_pci_fixup(void *blob, bd_t *bd)
{
int i, np;
struct pci_dev *dev;
for (i = 0; i < pci_devno; i++) {
dev = &pci_devs[i];
/*
* The GW16082 consists of a TI XIO2001 PCIe-to-PCI bridge and
* an EEPROM at i2c1-0x50.
*/
if ((dev->vendor == PCI_VENDOR_ID_TI) &&
(dev->device == 0x8240) &&
(i2c_set_bus_num(1) == 0) &&
(i2c_probe(0x50) == 0))
{
np = fdt_add_pci_path(blob, dev);
if (np > 0)
fdt_fixup_gw16082(blob, np, dev);
}
/* ethernet1 mac address */
else if ((dev->vendor == PCI_VENDOR_ID_MARVELL) &&
(dev->device == 0x4380))
{
np = fdt_add_pci_path(blob, dev);
if (np > 0)
fdt_fixup_sky2(blob, np, dev);
}
}
}
#endif /* if defined(CONFIG_CMD_PCI) */
void ft_board_wdog_fixup(void *blob, phys_addr_t addr)
{
int off = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", addr);
if (off) {
fdt_delprop(blob, off, "ext-reset-output");
fdt_delprop(blob, off, "fsl,ext-reset-output");
}
}
/*
* called prior to booting kernel or by 'fdt boardsetup' command
*
* unless 'fdt_noauto' env var is set we will update the following in the DTB:
* - mtd partitions based on mtdparts/mtdids env
* - system-serial (board serial num from EEPROM)
* - board (full model from EEPROM)
* - peripherals removed from DTB if not loaded on board (per EEPROM config)
*/
#define WDOG1_ADDR 0x20bc000
#define WDOG2_ADDR 0x20c0000
#define GPIO3_ADDR 0x20a4000
#define USDHC3_ADDR 0x2198000
#define PWM0_ADDR 0x2080000
int ft_board_setup(void *blob, bd_t *bd)
{
struct ventana_board_info *info = &ventana_info;
struct ventana_eeprom_config *cfg;
static const struct node_info nodes[] = {
{ "sst,w25q256", MTD_DEV_TYPE_NOR, }, /* SPI flash */
{ "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
};
const char *model = env_get("model");
const char *display = env_get("display");
int i;
char rev = 0;
/* determine board revision */
for (i = sizeof(ventana_info.model) - 1; i > 0; i--) {
if (ventana_info.model[i] >= 'A') {
rev = ventana_info.model[i];
break;
}
}
if (env_get("fdt_noauto")) {
puts(" Skiping ft_board_setup (fdt_noauto defined)\n");
return 0;
}
if (test_bit(EECONFIG_NAND, info->config)) {
/* Update partition nodes using info from mtdparts env var */
puts(" Updating MTD partitions...\n");
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
}
/* Update display timings from display env var */
if (display) {
if (fdt_fixup_display(blob, fdt_get_alias(blob, "lvds0"),
display) >= 0)
printf(" Set display timings for %s...\n", display);
}
printf(" Adjusting FDT per EEPROM for %s...\n", model);
/* board serial number */
fdt_setprop(blob, 0, "system-serial", env_get("serial#"),
strlen(env_get("serial#")) + 1);
/* board (model contains model from device-tree) */
fdt_setprop(blob, 0, "board", info->model,
strlen((const char *)info->model) + 1);
/* set desired digital video capture format */
ft_sethdmiinfmt(blob, env_get("hdmiinfmt"));
/*
* Board model specific fixups
*/
switch (board_type) {
case GW51xx:
/*
* disable wdog node for GW51xx-A/B to work around
* errata causing wdog timer to be unreliable.
*/
if (rev >= 'A' && rev < 'C') {
i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt",
WDOG1_ADDR);
if (i)
fdt_status_disabled(blob, i);
}
/* GW51xx-E adds WDOG1_B external reset */
if (rev < 'E')
ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
case GW52xx:
/* GW522x Uses GPIO3_IO23 instead of GPIO1_IO29 */
if (info->model[4] == '2') {
u32 handle = 0;
u32 *range = NULL;
i = fdt_node_offset_by_compatible(blob, -1,
"fsl,imx6q-pcie");
if (i)
range = (u32 *)fdt_getprop(blob, i,
"reset-gpio", NULL);
if (range) {
i = fdt_node_offset_by_compat_reg(blob,
"fsl,imx6q-gpio", GPIO3_ADDR);
if (i)
handle = fdt_get_phandle(blob, i);
if (handle) {
range[0] = cpu_to_fdt32(handle);
range[1] = cpu_to_fdt32(23);
}
}
/* these have broken usd_vsel */
if (strstr((const char *)info->model, "SP318-B") ||
strstr((const char *)info->model, "SP331-B"))
gpio_cfg[board_type].usd_vsel = 0;
/* GW522x-B adds WDOG1_B external reset */
if (rev < 'B')
ft_board_wdog_fixup(blob, WDOG1_ADDR);
}
/* GW520x-E adds WDOG1_B external reset */
else if (info->model[4] == '0' && rev < 'E')
ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
case GW53xx:
/* GW53xx-E adds WDOG1_B external reset */
if (rev < 'E')
ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
case GW54xx:
/*
* disable serial2 node for GW54xx for compatibility with older
* 3.10.x kernel that improperly had this node enabled in the DT
*/
fdt_set_status_by_alias(blob, "serial2", FDT_STATUS_DISABLED,
0);
/* GW54xx-E adds WDOG2_B external reset */
if (rev < 'E')
ft_board_wdog_fixup(blob, WDOG2_ADDR);
break;
case GW551x:
/*
* isolate CSI0_DATA_EN for GW551x-A to work around errata
* causing non functional digital video in (it is not hooked up)
*/
if (rev == 'A') {
u32 *range = NULL;
int len;
const u32 *handle = NULL;
i = fdt_node_offset_by_compatible(blob, -1,
"fsl,imx-tda1997x-video");
if (i)
handle = fdt_getprop(blob, i, "pinctrl-0",
NULL);
if (handle)
i = fdt_node_offset_by_phandle(blob,
fdt32_to_cpu(*handle));
if (i)
range = (u32 *)fdt_getprop(blob, i, "fsl,pins",
&len);
if (range) {
len /= sizeof(u32);
for (i = 0; i < len; i += 6) {
u32 mux_reg = fdt32_to_cpu(range[i+0]);
u32 conf_reg = fdt32_to_cpu(range[i+1]);
/* mux PAD_CSI0_DATA_EN to GPIO */
if (is_cpu_type(MXC_CPU_MX6Q) &&
mux_reg == 0x260 &&
conf_reg == 0x630)
range[i+3] = cpu_to_fdt32(0x5);
else if (!is_cpu_type(MXC_CPU_MX6Q) &&
mux_reg == 0x08c &&
conf_reg == 0x3a0)
range[i+3] = cpu_to_fdt32(0x5);
}
fdt_setprop_inplace(blob, i, "fsl,pins", range,
len);
}
/* set BT656 video format */
ft_sethdmiinfmt(blob, "yuv422bt656");
}
/* GW551x-C adds WDOG1_B external reset */
if (rev < 'C')
ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
case GW5901:
case GW5902:
/* GW5901/GW5901 revB adds WDOG1_B as an external reset */
if (rev < 'B')
ft_board_wdog_fixup(blob, WDOG1_ADDR);
break;
}
/* Configure DIO */
for (i = 0; i < gpio_cfg[board_type].dio_num; i++) {
struct dio_cfg *cfg = &gpio_cfg[board_type].dio_cfg[i];
char arg[10];
sprintf(arg, "dio%d", i);
if (!hwconfig(arg))
continue;
if (hwconfig_subarg_cmp(arg, "mode", "pwm") && cfg->pwm_param)
{
phys_addr_t addr;
int off;
printf(" Enabling pwm%d for DIO%d\n",
cfg->pwm_param, i);
addr = PWM0_ADDR + (0x4000 * (cfg->pwm_param - 1));
off = fdt_node_offset_by_compat_reg(blob,
"fsl,imx6q-pwm",
addr);
if (off)
fdt_status_okay(blob, off);
}
}
/* remove no-1-8-v if UHS-I support is present */
if (gpio_cfg[board_type].usd_vsel) {
debug("Enabling UHS-I support\n");
i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-usdhc",
USDHC3_ADDR);
if (i)
fdt_delprop(blob, i, "no-1-8-v");
}
#if defined(CONFIG_CMD_PCI)
if (!env_get("nopcifixup"))
ft_board_pci_fixup(blob, bd);
#endif
/*
* Peripheral Config:
* remove nodes by alias path if EEPROM config tells us the
* peripheral is not loaded on the board.
*/
if (env_get("fdt_noconfig")) {
puts(" Skiping periperhal config (fdt_noconfig defined)\n");
return 0;
}
cfg = econfig;
while (cfg->name) {
if (!test_bit(cfg->bit, info->config)) {
fdt_del_node_and_alias(blob, cfg->dtalias ?
cfg->dtalias : cfg->name);
}
cfg++;
}
return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */
static struct mxc_serial_platdata ventana_mxc_serial_plat = {
.reg = (struct mxc_uart *)UART2_BASE,
};
U_BOOT_DEVICE(ventana_serial) = {
.name = "serial_mxc",
.platdata = &ventana_mxc_serial_plat,
};
Reference in a new issue View git blame Copy permalink