mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-07 13:44:29 +00:00
c541bfda2f
Some generic PX30 SoMs found in the wild use UART3 as their debug output instead of UART2 (used for MMC) and UART5. Make it possible to use UART3 as early debug output, with the associated clock and pinmux configuration. Two sets of output pins are supported (M0/M1). Future users should also note that the pinmux default in the dts is to use the M1 pins while the Kconfig option takes M0 as a default. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
325 lines
8.4 KiB
C
325 lines
8.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2017 Rockchip Electronics Co., Ltd
|
|
*/
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <asm/armv8/mmu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-rockchip/grf_px30.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <asm/arch-rockchip/uart.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/arch-rockchip/cru_px30.h>
|
|
#include <dt-bindings/clock/px30-cru.h>
|
|
|
|
static struct mm_region px30_mem_map[] = {
|
|
{
|
|
.virt = 0x0UL,
|
|
.phys = 0x0UL,
|
|
.size = 0xff000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_INNER_SHARE
|
|
}, {
|
|
.virt = 0xff000000UL,
|
|
.phys = 0xff000000UL,
|
|
.size = 0x01000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* List terminator */
|
|
0,
|
|
}
|
|
};
|
|
|
|
struct mm_region *mem_map = px30_mem_map;
|
|
|
|
#define PMU_PWRDN_CON 0xff000018
|
|
#define PMUGRF_BASE 0xff010000
|
|
#define GRF_BASE 0xff140000
|
|
#define CRU_BASE 0xff2b0000
|
|
#define VIDEO_PHY_BASE 0xff2e0000
|
|
#define SERVICE_CORE_ADDR 0xff508000
|
|
#define DDR_FW_BASE 0xff534000
|
|
|
|
#define FW_DDR_CON 0x40
|
|
|
|
#define QOS_PRIORITY 0x08
|
|
|
|
#define QOS_PRIORITY_LEVEL(h, l) ((((h) & 3) << 8) | ((l) & 3))
|
|
|
|
/* GRF_GPIO1BH_IOMUX */
|
|
enum {
|
|
GPIO1B7_SHIFT = 12,
|
|
GPIO1B7_MASK = 0xf << GPIO1B7_SHIFT,
|
|
GPIO1B7_GPIO = 0,
|
|
GPIO1B7_FLASH_RDN,
|
|
GPIO1B7_UART3_RXM1,
|
|
GPIO1B7_SPI0_CLK,
|
|
|
|
GPIO1B6_SHIFT = 8,
|
|
GPIO1B6_MASK = 0xf << GPIO1B6_SHIFT,
|
|
GPIO1B6_GPIO = 0,
|
|
GPIO1B6_FLASH_CS1,
|
|
GPIO1B6_UART3_TXM1,
|
|
GPIO1B6_SPI0_CSN,
|
|
};
|
|
|
|
/* GRF_GPIO1CL_IOMUX */
|
|
enum {
|
|
GPIO1C1_SHIFT = 4,
|
|
GPIO1C1_MASK = 0xf << GPIO1C1_SHIFT,
|
|
GPIO1C1_GPIO = 0,
|
|
GPIO1C1_UART1_TX,
|
|
|
|
GPIO1C0_SHIFT = 0,
|
|
GPIO1C0_MASK = 0xf << GPIO1C0_SHIFT,
|
|
GPIO1C0_GPIO = 0,
|
|
GPIO1C0_UART1_RX,
|
|
};
|
|
|
|
/* GRF_GPIO1DL_IOMUX */
|
|
enum {
|
|
GPIO1D3_SHIFT = 12,
|
|
GPIO1D3_MASK = 0xf << GPIO1D3_SHIFT,
|
|
GPIO1D3_GPIO = 0,
|
|
GPIO1D3_SDMMC_D1,
|
|
GPIO1D3_UART2_RXM0,
|
|
|
|
GPIO1D2_SHIFT = 8,
|
|
GPIO1D2_MASK = 0xf << GPIO1D2_SHIFT,
|
|
GPIO1D2_GPIO = 0,
|
|
GPIO1D2_SDMMC_D0,
|
|
GPIO1D2_UART2_TXM0,
|
|
};
|
|
|
|
/* GRF_GPIO1DH_IOMUX */
|
|
enum {
|
|
GPIO1D7_SHIFT = 12,
|
|
GPIO1D7_MASK = 0xf << GPIO1D7_SHIFT,
|
|
GPIO1D7_GPIO = 0,
|
|
GPIO1D7_SDMMC_CMD,
|
|
|
|
GPIO1D6_SHIFT = 8,
|
|
GPIO1D6_MASK = 0xf << GPIO1D6_SHIFT,
|
|
GPIO1D6_GPIO = 0,
|
|
GPIO1D6_SDMMC_CLK,
|
|
|
|
GPIO1D5_SHIFT = 4,
|
|
GPIO1D5_MASK = 0xf << GPIO1D5_SHIFT,
|
|
GPIO1D5_GPIO = 0,
|
|
GPIO1D5_SDMMC_D3,
|
|
|
|
GPIO1D4_SHIFT = 0,
|
|
GPIO1D4_MASK = 0xf << GPIO1D4_SHIFT,
|
|
GPIO1D4_GPIO = 0,
|
|
GPIO1D4_SDMMC_D2,
|
|
};
|
|
|
|
/* GRF_GPIO2BH_IOMUX */
|
|
enum {
|
|
GPIO2B6_SHIFT = 8,
|
|
GPIO2B6_MASK = 0xf << GPIO2B6_SHIFT,
|
|
GPIO2B6_GPIO = 0,
|
|
GPIO2B6_CIF_D1M0,
|
|
GPIO2B6_UART2_RXM1,
|
|
|
|
GPIO2B4_SHIFT = 0,
|
|
GPIO2B4_MASK = 0xf << GPIO2B4_SHIFT,
|
|
GPIO2B4_GPIO = 0,
|
|
GPIO2B4_CIF_D0M0,
|
|
GPIO2B4_UART2_TXM1,
|
|
};
|
|
|
|
/* GRF_GPIO3AL_IOMUX */
|
|
enum {
|
|
GPIO3A2_SHIFT = 8,
|
|
GPIO3A2_MASK = 0xf << GPIO3A2_SHIFT,
|
|
GPIO3A2_GPIO = 0,
|
|
GPIO3A2_UART5_TX = 4,
|
|
|
|
GPIO3A1_SHIFT = 4,
|
|
GPIO3A1_MASK = 0xf << GPIO3A1_SHIFT,
|
|
GPIO3A1_GPIO = 0,
|
|
GPIO3A1_UART5_RX = 4,
|
|
};
|
|
|
|
/* PMUGRF_GPIO0CL_IOMUX */
|
|
enum {
|
|
GPIO0C1_SHIFT = 2,
|
|
GPIO0C1_MASK = 0x3 << GPIO0C1_SHIFT,
|
|
GPIO0C1_GPIO = 0,
|
|
GPIO0C1_PWM_3,
|
|
GPIO0C1_UART3_RXM0,
|
|
GPIO0C1_PMU_DEBUG4,
|
|
|
|
GPIO0C0_SHIFT = 0,
|
|
GPIO0C0_MASK = 0x3 << GPIO0C0_SHIFT,
|
|
GPIO0C0_GPIO = 0,
|
|
GPIO0C0_PWM_1,
|
|
GPIO0C0_UART3_TXM0,
|
|
GPIO0C0_PMU_DEBUG3,
|
|
};
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
static struct px30_grf * const grf = (void *)GRF_BASE;
|
|
u32 __maybe_unused val;
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/* We do some SoC one time setting here. */
|
|
/* Disable the ddr secure region setting to make it non-secure */
|
|
writel(0x0, DDR_FW_BASE + FW_DDR_CON);
|
|
|
|
/* Set cpu qos priority */
|
|
writel(QOS_PRIORITY_LEVEL(1, 1), SERVICE_CORE_ADDR + QOS_PRIORITY);
|
|
|
|
#if !defined(CONFIG_DEBUG_UART_BOARD_INIT) || \
|
|
(CONFIG_DEBUG_UART_BASE != 0xff160000) || \
|
|
(CONFIG_DEBUG_UART_CHANNEL != 0)
|
|
/* fix sdmmc pinmux if not using uart2-channel0 as debug uart */
|
|
rk_clrsetreg(&grf->gpio1dl_iomux,
|
|
GPIO1D3_MASK | GPIO1D2_MASK,
|
|
GPIO1D3_SDMMC_D1 << GPIO1D3_SHIFT |
|
|
GPIO1D2_SDMMC_D0 << GPIO1D2_SHIFT);
|
|
rk_clrsetreg(&grf->gpio1dh_iomux,
|
|
GPIO1D7_MASK | GPIO1D6_MASK | GPIO1D5_MASK | GPIO1D4_MASK,
|
|
GPIO1D7_SDMMC_CMD << GPIO1D7_SHIFT |
|
|
GPIO1D6_SDMMC_CLK << GPIO1D6_SHIFT |
|
|
GPIO1D5_SDMMC_D3 << GPIO1D5_SHIFT |
|
|
GPIO1D4_SDMMC_D2 << GPIO1D4_SHIFT);
|
|
#endif
|
|
|
|
#endif
|
|
|
|
/* Enable PD_VO (default disable at reset) */
|
|
rk_clrreg(PMU_PWRDN_CON, 1 << 13);
|
|
|
|
/* Disable video phy bandgap by default */
|
|
writel(0x82, VIDEO_PHY_BASE + 0x0000);
|
|
writel(0x05, VIDEO_PHY_BASE + 0x03ac);
|
|
|
|
/* Clear the force_jtag */
|
|
rk_clrreg(&grf->cpu_con[1], 1 << 7);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
|
|
void board_debug_uart_init(void)
|
|
{
|
|
#if defined(CONFIG_DEBUG_UART_BASE) && \
|
|
(CONFIG_DEBUG_UART_BASE == 0xff168000) && \
|
|
(CONFIG_DEBUG_UART_CHANNEL != 1)
|
|
static struct px30_pmugrf * const pmugrf = (void *)PMUGRF_BASE;
|
|
#endif
|
|
static struct px30_grf * const grf = (void *)GRF_BASE;
|
|
static struct px30_cru * const cru = (void *)CRU_BASE;
|
|
|
|
#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff158000)
|
|
/* uart_sel_clk default select 24MHz */
|
|
rk_clrsetreg(&cru->clksel_con[34],
|
|
UART1_PLL_SEL_MASK | UART1_DIV_CON_MASK,
|
|
UART1_PLL_SEL_24M << UART1_PLL_SEL_SHIFT | 0);
|
|
rk_clrsetreg(&cru->clksel_con[35],
|
|
UART1_CLK_SEL_MASK,
|
|
UART1_CLK_SEL_UART1 << UART1_CLK_SEL_SHIFT);
|
|
|
|
rk_clrsetreg(&grf->gpio1cl_iomux,
|
|
GPIO1C1_MASK | GPIO1C0_MASK,
|
|
GPIO1C1_UART1_TX << GPIO1C1_SHIFT |
|
|
GPIO1C0_UART1_RX << GPIO1C0_SHIFT);
|
|
#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff168000)
|
|
/* GRF_IOFUNC_CON0 */
|
|
enum {
|
|
CON_IOMUX_UART3SEL_SHIFT = 9,
|
|
CON_IOMUX_UART3SEL_MASK = 1 << CON_IOMUX_UART3SEL_SHIFT,
|
|
CON_IOMUX_UART3SEL_M0 = 0,
|
|
CON_IOMUX_UART3SEL_M1,
|
|
};
|
|
|
|
/* uart_sel_clk default select 24MHz */
|
|
rk_clrsetreg(&cru->clksel_con[40],
|
|
UART3_PLL_SEL_MASK | UART3_DIV_CON_MASK,
|
|
UART3_PLL_SEL_24M << UART3_PLL_SEL_SHIFT | 0);
|
|
rk_clrsetreg(&cru->clksel_con[41],
|
|
UART3_CLK_SEL_MASK,
|
|
UART3_CLK_SEL_UART3 << UART3_CLK_SEL_SHIFT);
|
|
|
|
#if (CONFIG_DEBUG_UART_CHANNEL == 1)
|
|
rk_clrsetreg(&grf->iofunc_con0,
|
|
CON_IOMUX_UART3SEL_MASK,
|
|
CON_IOMUX_UART3SEL_M1 << CON_IOMUX_UART3SEL_SHIFT);
|
|
|
|
rk_clrsetreg(&grf->gpio1bh_iomux,
|
|
GPIO1B7_MASK | GPIO1B6_MASK,
|
|
GPIO1B7_UART3_RXM1 << GPIO1B7_SHIFT |
|
|
GPIO1B6_UART3_TXM1 << GPIO1B6_SHIFT);
|
|
#else
|
|
rk_clrsetreg(&grf->iofunc_con0,
|
|
CON_IOMUX_UART3SEL_MASK,
|
|
CON_IOMUX_UART3SEL_M0 << CON_IOMUX_UART3SEL_SHIFT);
|
|
|
|
rk_clrsetreg(&pmugrf->gpio0cl_iomux,
|
|
GPIO0C1_MASK | GPIO0C0_MASK,
|
|
GPIO0C1_UART3_RXM0 << GPIO0C1_SHIFT |
|
|
GPIO0C0_UART3_TXM0 << GPIO0C0_SHIFT);
|
|
#endif /* CONFIG_DEBUG_UART_CHANNEL == 1 */
|
|
|
|
#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff178000)
|
|
/* uart_sel_clk default select 24MHz */
|
|
rk_clrsetreg(&cru->clksel_con[46],
|
|
UART5_PLL_SEL_MASK | UART5_DIV_CON_MASK,
|
|
UART5_PLL_SEL_24M << UART5_PLL_SEL_SHIFT | 0);
|
|
rk_clrsetreg(&cru->clksel_con[47],
|
|
UART5_CLK_SEL_MASK,
|
|
UART5_CLK_SEL_UART5 << UART5_CLK_SEL_SHIFT);
|
|
|
|
rk_clrsetreg(&grf->gpio3al_iomux,
|
|
GPIO3A2_MASK | GPIO3A1_MASK,
|
|
GPIO3A2_UART5_TX << GPIO3A2_SHIFT |
|
|
GPIO3A1_UART5_RX << GPIO3A1_SHIFT);
|
|
#else
|
|
/* GRF_IOFUNC_CON0 */
|
|
enum {
|
|
CON_IOMUX_UART2SEL_SHIFT = 10,
|
|
CON_IOMUX_UART2SEL_MASK = 3 << CON_IOMUX_UART2SEL_SHIFT,
|
|
CON_IOMUX_UART2SEL_M0 = 0,
|
|
CON_IOMUX_UART2SEL_M1,
|
|
CON_IOMUX_UART2SEL_USBPHY,
|
|
};
|
|
|
|
/* uart_sel_clk default select 24MHz */
|
|
rk_clrsetreg(&cru->clksel_con[37],
|
|
UART2_PLL_SEL_MASK | UART2_DIV_CON_MASK,
|
|
UART2_PLL_SEL_24M << UART2_PLL_SEL_SHIFT | 0);
|
|
rk_clrsetreg(&cru->clksel_con[38],
|
|
UART2_CLK_SEL_MASK,
|
|
UART2_CLK_SEL_UART2 << UART2_CLK_SEL_SHIFT);
|
|
|
|
#if (CONFIG_DEBUG_UART_CHANNEL == 1)
|
|
/* Enable early UART2 */
|
|
rk_clrsetreg(&grf->iofunc_con0,
|
|
CON_IOMUX_UART2SEL_MASK,
|
|
CON_IOMUX_UART2SEL_M1 << CON_IOMUX_UART2SEL_SHIFT);
|
|
|
|
rk_clrsetreg(&grf->gpio2bh_iomux,
|
|
GPIO2B6_MASK | GPIO2B4_MASK,
|
|
GPIO2B6_UART2_RXM1 << GPIO2B6_SHIFT |
|
|
GPIO2B4_UART2_TXM1 << GPIO2B4_SHIFT);
|
|
#else
|
|
rk_clrsetreg(&grf->iofunc_con0,
|
|
CON_IOMUX_UART2SEL_MASK,
|
|
CON_IOMUX_UART2SEL_M0 << CON_IOMUX_UART2SEL_SHIFT);
|
|
|
|
rk_clrsetreg(&grf->gpio1dl_iomux,
|
|
GPIO1D3_MASK | GPIO1D2_MASK,
|
|
GPIO1D3_UART2_RXM0 << GPIO1D3_SHIFT |
|
|
GPIO1D2_UART2_TXM0 << GPIO1D2_SHIFT);
|
|
#endif /* CONFIG_DEBUG_UART_CHANNEL == 1 */
|
|
|
|
#endif /* CONFIG_DEBUG_UART_BASE && CONFIG_DEBUG_UART_BASE == ... */
|
|
}
|
|
#endif /* CONFIG_DEBUG_UART_BOARD_INIT */
|