u-boot/board/congatec/Kconfig
Stefan Roese 82ceba2ca2 x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support
This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM,
installed on the congatec Qseven 2.0 evaluation carrier board
(conga-QEVAL).

Its port is very similar to the MinnowboardMAX port and also uses
the Intel FSP as described in doc/README.x86.

Currently supported are the following interfaces / devices:
- UART (via Winbond legacy SuperIO chip on carrier board)
- Ethernet (PCIe Intel I210 / E1000)
- SPI including SPI NOR as boot-device
- USB 2.0
- SATA via U-Boot SCSI IF
- eMMC
- Video (HDMI output @ 800x600)
- PCIe

Not supported yet is:
- I2C
- USB 3.0

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:27 +08:00

29 lines
722 B
Text

#
# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
if VENDOR_CONGATEC
choice
prompt "Mainboard model"
optional
config TARGET_CONGA_QEVAL20_QA3_E3845
bool "congatec QEVAL 2.0 & conga-QA3/E3845"
help
This is the congatec Qseven 2.0 evaluation carrier board
(conga-QEVAL) equipped with the conga-QA3/E3845-4G SoM.
It contains an Atom E3845 with Ethernet, micro-SD, USB 2,
USB 3, SATA, serial console and HDMI 1.3 video out.
It requires some binary blobs - see README.x86 for details.
Note that PCIE_ECAM_BASE is set up by the FSP so the value used
by U-Boot matches that value.
endchoice
source "board/congatec/conga-qeval20-qa3-e3845/Kconfig"
endif