mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 00:49:43 +00:00
7594c51ae6
When building with W=1 errors like the one below is seen: board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning: no previous prototype for ‘overwrite_console’ [-Wmissing-prototypes] int overwrite_console(void) Fix the build warnings by including <input.h>. Signed-off-by: Diego Dorta <diego.dorta@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
326 lines
8.8 KiB
C
326 lines
8.8 KiB
C
/*
|
|
* (C) Copyright 2014
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* Based on:
|
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm/mach-imx/boot_mode.h>
|
|
#include <asm/mach-imx/mxc_i2c.h>
|
|
#include <asm/mach-imx/video.h>
|
|
#include <mmc.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <miiphy.h>
|
|
#include <netdev.h>
|
|
#include <asm/arch/mxc_hdmi.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <linux/fb.h>
|
|
#include <ipu_pixfmt.h>
|
|
#include <input.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <pwm.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
|
|
PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
|
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
|
|
|
#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
|
|
|
|
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
|
|
|
|
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
|
|
|
#define DISP_PAD_CTRL (0x10)
|
|
|
|
#define ECSPI4_CS1 IMX_GPIO_NR(5, 2)
|
|
|
|
#if (CONFIG_SYS_BOARD_VERSION == 1)
|
|
#include "./aristainetos-v1.c"
|
|
#elif ((CONFIG_SYS_BOARD_VERSION == 2) || (CONFIG_SYS_BOARD_VERSION == 3))
|
|
#include "./aristainetos-v2.c"
|
|
#endif
|
|
|
|
|
|
struct i2c_pads_info i2c_pad_info1 = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC,
|
|
.gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
|
|
.gp = IMX_GPIO_NR(5, 27)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
|
|
.gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
|
|
.gp = IMX_GPIO_NR(5, 26)
|
|
}
|
|
};
|
|
|
|
struct i2c_pads_info i2c_pad_info2 = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
|
|
.gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
|
|
.gp = IMX_GPIO_NR(4, 12)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
|
|
.gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC,
|
|
.gp = IMX_GPIO_NR(4, 13)
|
|
}
|
|
};
|
|
|
|
iomux_v3_cfg_t const usdhc1_pads[] = {
|
|
MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
};
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = imx_ddr_size();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
struct fsl_esdhc_cfg usdhc_cfg[2] = {
|
|
{USDHC1_BASE_ADDR},
|
|
{USDHC2_BASE_ADDR},
|
|
};
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
|
|
imx_iomux_v3_setup_multiple_pads(usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
|
|
#if (CONFIG_SYS_BOARD_VERSION == 2)
|
|
/*
|
|
* usdhc2 has a levelshifter on the carrier board Rev. DV1,
|
|
* that will automatically detect the driving direction.
|
|
* During initialisation this isn't working correctly,
|
|
* which causes DAT3 to be driven low towards the SD-card.
|
|
* This causes a SD-card enetring the SPI-Mode
|
|
* and therefore getting inaccessible until next power cycle.
|
|
* As workaround we drive the DAT3 line as GPIO and set it high.
|
|
* This makes usdhc2 unusable in u-boot, but works for the
|
|
* initialisation in Linux
|
|
*/
|
|
imx_iomux_v3_setup_pad(MX6_PAD_SD2_DAT3__GPIO1_IO12 |
|
|
MUX_PAD_CTRL(NO_PAD_CTRL));
|
|
gpio_direction_output(IMX_GPIO_NR(1, 12) , 1);
|
|
#endif
|
|
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Do not overwrite the console
|
|
* Use always serial for U-Boot console
|
|
*/
|
|
int overwrite_console(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
struct display_info_t const displays[] = {
|
|
{
|
|
.bus = -1,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB24,
|
|
.detect = NULL,
|
|
.enable = enable_lvds,
|
|
.mode = {
|
|
.name = "lb07wv8",
|
|
.refresh = 60,
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.pixclock = 30066,
|
|
.left_margin = 88,
|
|
.right_margin = 88,
|
|
.upper_margin = 20,
|
|
.lower_margin = 20,
|
|
.hsync_len = 80,
|
|
.vsync_len = 5,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
}
|
|
}
|
|
#if ((CONFIG_SYS_BOARD_VERSION == 2) || (CONFIG_SYS_BOARD_VERSION == 3))
|
|
, {
|
|
.bus = -1,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB24,
|
|
.detect = NULL,
|
|
.enable = enable_spi_display,
|
|
.mode = {
|
|
.name = "lg4573",
|
|
.refresh = 57,
|
|
.xres = 480,
|
|
.yres = 800,
|
|
.pixclock = 37037,
|
|
.left_margin = 59,
|
|
.right_margin = 10,
|
|
.upper_margin = 15,
|
|
.lower_margin = 15,
|
|
.hsync_len = 10,
|
|
.vsync_len = 15,
|
|
.sync = FB_SYNC_EXT | FB_SYNC_HOR_HIGH_ACT |
|
|
FB_SYNC_VERT_HIGH_ACT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
}
|
|
}
|
|
#endif
|
|
};
|
|
size_t display_count = ARRAY_SIZE(displays);
|
|
|
|
/* no console on this board */
|
|
int board_cfb_skip(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
iomux_v3_cfg_t nfc_pads[] = {
|
|
MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
MX6_PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
static void setup_gpmi_nand(void)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
/* config gpmi nand iomux */
|
|
imx_iomux_v3_setup_multiple_pads(nfc_pads,
|
|
ARRAY_SIZE(nfc_pads));
|
|
|
|
/* gate ENFC_CLK_ROOT clock first,before clk source switch */
|
|
clrbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
|
|
|
|
/* config gpmi and bch clock to 100 MHz */
|
|
clrsetbits_le32(&mxc_ccm->cs2cdr,
|
|
MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
|
|
MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
|
|
MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
|
|
MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
|
|
MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
|
|
MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
|
|
|
|
/* enable ENFC_CLK_ROOT clock */
|
|
setbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
|
|
|
|
/* enable gpmi and bch clock gating */
|
|
setbits_le32(&mxc_ccm->CCGR4,
|
|
MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
|
|
MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
|
|
MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
|
|
MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
|
|
MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
|
|
|
|
/* enable apbh clock gating */
|
|
setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
|
|
setup_spi();
|
|
|
|
setup_i2c(0, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
|
|
&i2c_pad_info1);
|
|
setup_i2c(1, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
|
|
&i2c_pad_info2);
|
|
setup_i2c(2, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
|
|
&i2c_pad_info3);
|
|
setup_i2c4();
|
|
|
|
/* SPI NOR Flash read only */
|
|
gpio_request(CONFIG_GPIO_ENABLE_SPI_FLASH, "ena_spi_nor");
|
|
gpio_direction_output(CONFIG_GPIO_ENABLE_SPI_FLASH, 0);
|
|
gpio_free(CONFIG_GPIO_ENABLE_SPI_FLASH);
|
|
|
|
setup_board_gpio();
|
|
setup_gpmi_nand();
|
|
setup_board_spi();
|
|
|
|
/* GPIO_1 for USB_OTG_ID */
|
|
clrsetbits_le32(&iomux->gpr[1], IOMUXC_GPR1_USB_OTG_ID_SEL_MASK, 0);
|
|
imx_iomux_v3_setup_multiple_pads(misc_pads, ARRAY_SIZE(misc_pads));
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
printf("Board: %s\n", CONFIG_BOARDNAME);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_USB_EHCI_MX6
|
|
int board_ehci_hcd_init(int port)
|
|
{
|
|
int ret;
|
|
|
|
ret = gpio_request(ARISTAINETOS_USB_H1_PWR, "usb-h1-pwr");
|
|
if (!ret)
|
|
gpio_direction_output(ARISTAINETOS_USB_H1_PWR, 1);
|
|
ret = gpio_request(ARISTAINETOS_USB_OTG_PWR, "usb-OTG-pwr");
|
|
if (!ret)
|
|
gpio_direction_output(ARISTAINETOS_USB_OTG_PWR, 1);
|
|
return 0;
|
|
}
|
|
|
|
int board_ehci_power(int port, int on)
|
|
{
|
|
if (port)
|
|
gpio_set_value(ARISTAINETOS_USB_OTG_PWR, on);
|
|
else
|
|
gpio_set_value(ARISTAINETOS_USB_H1_PWR, on);
|
|
return 0;
|
|
}
|
|
#endif
|