u-boot/include/configs/h2200.h
Nikita Kiryanov 181bd9dc61 kconfig: add config option for shell prompt
Add option to set shell prompt string from menuconfig and migrate
boards globally.

The migration is done as follows:
- Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
  entry moved to their defconfig files.
- Boards that defined some kind of #ifdef logic which selects the
  CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
  right before the #ifdef logic and were left alone.
- This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
  CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h
  files. This results in a streamlined default value across platforms, and
  includes the following files: spear-common, sunxi-common, mv-common,
  ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
- Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were
  not updated in their respective defconfig files under the assumption that
  since they did not explicitly define a value, they're fine with whatever
  the default is.
- On the other hand, boards that relied on a value defined in some
  <boards>_common.h file such as woodburn_common, rpi-common,
  bur_am335x_common, ls2085a_common, siemens_am33x_common, and
  omap3_evm_common, had their values moved to the respective defconfig files.
- The define V_PROMPT was removed, since it is not used anywhere except for
  assigning a value for CONFIG_SYS_PROMPT.

Cc: Tom Rini <trini@konsulko.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
[trini: Add spring, sniper, smartweb to conversion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-13 07:19:33 -04:00

162 lines
3.9 KiB
C

/*
* iPAQ h2200 board configuration
*
* Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define MACH_TYPE_H2200 341
#define CONFIG_MACH_TYPE MACH_TYPE_H2200
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_CPU_PXA25X 1
#define CONFIG_BOARD_H2200
#define CONFIG_SYS_NO_FLASH
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE
#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
#define CONFIG_ENV_SIZE 0x00040000
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
/*
* iPAQ 1st stage bootloader loads 2nd stage bootloader
* at address 0xa0040000 but bootloader requires header
* which is 0x1000 long.
*
* --- Header begin ---
* .word 0xea0003fe ; b 0x1000
*
* .org 0x40
* .ascii "ECEC"
*
* .org 0x1000
* --- Header end ---
*/
#define CONFIG_SYS_TEXT_BASE 0xa0041000
/*
* Static chips
*/
#define CONFIG_SYS_MSC0_VAL 0x246c7ffc
#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
/*
* PCMCIA and CF Interfaces
*/
#define CONFIG_SYS_MECR_VAL 0x00000000
#define CONFIG_SYS_MCMEM0_VAL 0x00000000
#define CONFIG_SYS_MCMEM1_VAL 0x00000000
#define CONFIG_SYS_MCATT0_VAL 0x00000000
#define CONFIG_SYS_MCATT1_VAL 0x00000000
#define CONFIG_SYS_MCIO0_VAL 0x00000000
#define CONFIG_SYS_MCIO1_VAL 0x00000000
#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
#define CONFIG_SYS_SXCNFG_VAL 0x00040004
#define CONFIG_SYS_MDREFR_VAL 0x0099E018
#define CONFIG_SYS_MDCNFG_VAL 0x01C801CB
#define CONFIG_SYS_MDMRS_VAL 0x00220022
#define CONFIG_SYS_PSSR_VAL 0x00000000
#define CONFIG_SYS_CKEN 0x00004840
#define CONFIG_SYS_CCCR 0x00000161
/*
* GPIOs
*/
#define CONFIG_SYS_GPSR0_VAL 0x01000000
#define CONFIG_SYS_GPSR1_VAL 0x00000000
#define CONFIG_SYS_GPSR2_VAL 0x00010000
#define CONFIG_SYS_GPCR0_VAL 0x00000000
#define CONFIG_SYS_GPCR1_VAL 0x00000000
#define CONFIG_SYS_GPCR2_VAL 0x00000000
#define CONFIG_SYS_GPDR0_VAL 0xF7E38C00
#define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83
#define CONFIG_SYS_GPDR2_VAL 0x000157FF
#define CONFIG_SYS_GAFR0_L_VAL 0x80401000
#define CONFIG_SYS_GAFR0_U_VAL 0x00000112
#define CONFIG_SYS_GAFR1_L_VAL 0x600A9550
#define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA
#define CONFIG_SYS_GAFR2_L_VAL 0x20000000
#define CONFIG_SYS_GAFR2_U_VAL 0x00000000
/*
* Serial port
*/
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART
#define CONFIG_CONS_INDEX 3
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
#define CONFIG_FIT
#define CONFIG_FIT_DISABLE_SHA256
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
/* Monitor Command Prompt */
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "$ "
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 256
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_USB_DEV_PULLUP_GPIO 33
/* USB VBUS GPIO 3 */
#define CONFIG_CMD_PING
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTCOMMAND \
"setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
"if bootp ; then setenv downloaded 1 ; fi ; done ; " \
"source :script ; " \
"bootm ; "
#define CONFIG_USB_GADGET_PXA2XX
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_SUBSET
#define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
#define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02"
#define CONFIG_EXTRA_ENV_SETTINGS \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0"
#endif /* __CONFIG_H */