u-boot/arch/arm/mach-tegra/clock.c
Simon Glass 000f15fa15 dm: tegra: Convert clock_decode_periph_id() to support livetree
Adjust this to take a device as a parameter instead of a node.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28 12:02:47 -06:00

834 lines
22 KiB
C

/*
* Copyright (c) 2010-2015, NVIDIA CORPORATION. All rights reserved.
*
* SPDX-License-Identifier: GPL-2.0
*/
/* Tegra SoC common clock control functions */
#include <common.h>
#include <div64.h>
#include <dm.h>
#include <errno.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/ap.h>
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch-tegra/pmc.h>
#include <asm/arch-tegra/timer.h>
/*
* This is our record of the current clock rate of each clock. We don't
* fill all of these in since we are only really interested in clocks which
* we use as parents.
*/
static unsigned pll_rate[CLOCK_ID_COUNT];
/*
* The oscillator frequency is fixed to one of four set values. Based on this
* the other clocks are set up appropriately.
*/
static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
13000000,
19200000,
12000000,
26000000,
38400000,
48000000,
};
/* return 1 if a peripheral ID is in range */
#define clock_type_id_isvalid(id) ((id) >= 0 && \
(id) < CLOCK_TYPE_COUNT)
char pllp_valid = 1; /* PLLP is set up correctly */
/* return 1 if a periphc_internal_id is in range */
#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
(id) < PERIPHC_COUNT)
/* number of clock outputs of a PLL */
static const u8 pll_num_clkouts[] = {
1, /* PLLC */
1, /* PLLM */
4, /* PLLP */
1, /* PLLA */
0, /* PLLU */
0, /* PLLD */
};
int clock_get_osc_bypass(void)
{
struct clk_rst_ctlr *clkrst =
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
u32 reg;
reg = readl(&clkrst->crc_osc_ctrl);
return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
}
/* Returns a pointer to the registers of the given pll */
static struct clk_pll *get_pll(enum clock_id clkid)
{
struct clk_rst_ctlr *clkrst =
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
assert(clock_id_is_pll(clkid));
if (clkid >= (enum clock_id)TEGRA_CLK_PLLS) {
debug("%s: Invalid PLL %d\n", __func__, clkid);
return NULL;
}
return &clkrst->crc_pll[clkid];
}
__weak struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid)
{
return NULL;
}
int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
u32 *divp, u32 *cpcon, u32 *lfcon)
{
struct clk_pll *pll = get_pll(clkid);
struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];
u32 data;
assert(clkid != CLOCK_ID_USB);
/* Safety check, adds to code size but is small */
if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
return -1;
data = readl(&pll->pll_base);
*divm = (data >> pllinfo->m_shift) & pllinfo->m_mask;
*divn = (data >> pllinfo->n_shift) & pllinfo->n_mask;
*divp = (data >> pllinfo->p_shift) & pllinfo->p_mask;
data = readl(&pll->pll_misc);
/* NOTE: On T210, cpcon/lfcon no longer exist, moved to KCP/KVCO */
*cpcon = (data >> pllinfo->kcp_shift) & pllinfo->kcp_mask;
*lfcon = (data >> pllinfo->kvco_shift) & pllinfo->kvco_mask;
return 0;
}
unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
u32 divp, u32 cpcon, u32 lfcon)
{
struct clk_pll *pll = NULL;
struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];
struct clk_pll_simple *simple_pll = NULL;
u32 misc_data, data;
if (clkid < (enum clock_id)TEGRA_CLK_PLLS) {
pll = get_pll(clkid);
} else {
simple_pll = clock_get_simple_pll(clkid);
if (!simple_pll) {
debug("%s: Uknown simple PLL %d\n", __func__, clkid);
return 0;
}
}
/*
* pllinfo has the m/n/p and kcp/kvco mask and shift
* values for all of the PLLs used in U-Boot, with any
* SoC differences accounted for.
*
* Preserve EN_LOCKDET, etc.
*/
if (pll)
misc_data = readl(&pll->pll_misc);
else
misc_data = readl(&simple_pll->pll_misc);
misc_data &= ~(pllinfo->kcp_mask << pllinfo->kcp_shift);
misc_data |= cpcon << pllinfo->kcp_shift;
misc_data &= ~(pllinfo->kvco_mask << pllinfo->kvco_shift);
misc_data |= lfcon << pllinfo->kvco_shift;
data = (divm << pllinfo->m_shift) | (divn << pllinfo->n_shift);
data |= divp << pllinfo->p_shift;
data |= (1 << PLL_ENABLE_SHIFT); /* BYPASS s/b 0 already */
if (pll) {
writel(misc_data, &pll->pll_misc);
writel(data, &pll->pll_base);
} else {
writel(misc_data, &simple_pll->pll_misc);
writel(data, &simple_pll->pll_base);
}
/* calculate the stable time */
return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
}
void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
unsigned divisor)
{
u32 *reg = get_periph_source_reg(periph_id);
u32 value;
value = readl(reg);
value &= ~OUT_CLK_SOURCE_31_30_MASK;
value |= source << OUT_CLK_SOURCE_31_30_SHIFT;
value &= ~OUT_CLK_DIVISOR_MASK;
value |= divisor << OUT_CLK_DIVISOR_SHIFT;
writel(value, reg);
}
int clock_ll_set_source_bits(enum periph_id periph_id, int mux_bits,
unsigned source)
{
u32 *reg = get_periph_source_reg(periph_id);
switch (mux_bits) {
case MASK_BITS_31_30:
clrsetbits_le32(reg, OUT_CLK_SOURCE_31_30_MASK,
source << OUT_CLK_SOURCE_31_30_SHIFT);
break;
case MASK_BITS_31_29:
clrsetbits_le32(reg, OUT_CLK_SOURCE_31_29_MASK,
source << OUT_CLK_SOURCE_31_29_SHIFT);
break;
case MASK_BITS_31_28:
clrsetbits_le32(reg, OUT_CLK_SOURCE_31_28_MASK,
source << OUT_CLK_SOURCE_31_28_SHIFT);
break;
default:
return -1;
}
return 0;
}
static int clock_ll_get_source_bits(enum periph_id periph_id, int mux_bits)
{
u32 *reg = get_periph_source_reg(periph_id);
u32 val = readl(reg);
switch (mux_bits) {
case MASK_BITS_31_30:
val >>= OUT_CLK_SOURCE_31_30_SHIFT;
val &= OUT_CLK_SOURCE_31_30_MASK;
return val;
case MASK_BITS_31_29:
val >>= OUT_CLK_SOURCE_31_29_SHIFT;
val &= OUT_CLK_SOURCE_31_29_MASK;
return val;
case MASK_BITS_31_28:
val >>= OUT_CLK_SOURCE_31_28_SHIFT;
val &= OUT_CLK_SOURCE_31_28_MASK;
return val;
default:
return -1;
}
}
void clock_ll_set_source(enum periph_id periph_id, unsigned source)
{
clock_ll_set_source_bits(periph_id, MASK_BITS_31_30, source);
}
/**
* Given the parent's rate and the required rate for the children, this works
* out the peripheral clock divider to use, in 7.1 binary format.
*
* @param divider_bits number of divider bits (8 or 16)
* @param parent_rate clock rate of parent clock in Hz
* @param rate required clock rate for this clock
* @return divider which should be used
*/
static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
unsigned long rate)
{
u64 divider = parent_rate * 2;
unsigned max_divider = 1 << divider_bits;
divider += rate - 1;
do_div(divider, rate);
if ((s64)divider - 2 < 0)
return 0;
if ((s64)divider - 2 >= max_divider)
return -1;
return divider - 2;
}
int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout, unsigned rate)
{
struct clk_pll *pll = get_pll(clkid);
int data = 0, div = 0, offset = 0;
if (!clock_id_is_pll(clkid))
return -1;
if (pllout + 1 > pll_num_clkouts[clkid])
return -1;
div = clk_get_divider(8, pll_rate[clkid], rate);
if (div < 0)
return -1;
/* out2 and out4 are in the high part of the register */
if (pllout == PLL_OUT2 || pllout == PLL_OUT4)
offset = 16;
data = (div << PLL_OUT_RATIO_SHIFT) |
PLL_OUT_OVRRIDE | PLL_OUT_CLKEN | PLL_OUT_RSTN;
clrsetbits_le32(&pll->pll_out[pllout >> 1],
PLL_OUT_RATIO_MASK << offset, data << offset);
return 0;
}
/**
* Given the parent's rate and the divider in 7.1 format, this works out the
* resulting peripheral clock rate.
*
* @param parent_rate clock rate of parent clock in Hz
* @param divider which should be used in 7.1 format
* @return effective clock rate of peripheral
*/
static unsigned long get_rate_from_divider(unsigned long parent_rate,
int divider)
{
u64 rate;
rate = (u64)parent_rate * 2;
do_div(rate, divider + 2);
return rate;
}
unsigned long clock_get_periph_rate(enum periph_id periph_id,
enum clock_id parent)
{
u32 *reg = get_periph_source_reg(periph_id);
unsigned parent_rate = pll_rate[parent];
int div = (readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT;
switch (periph_id) {
case PERIPH_ID_UART1:
case PERIPH_ID_UART2:
case PERIPH_ID_UART3:
case PERIPH_ID_UART4:
case PERIPH_ID_UART5:
#ifdef CONFIG_TEGRA20
/* There's no divider for these clocks in this SoC. */
return parent_rate;
#else
/*
* This undoes the +2 in get_rate_from_divider() which I
* believe is incorrect. Ideally we would fix
* get_rate_from_divider(), but... Removing the +2 from
* get_rate_from_divider() would probably require remove the -2
* from the tail of clk_get_divider() since I believe that's
* only there to invert get_rate_from_divider()'s +2. Observe
* how find_best_divider() uses those two functions together.
* However, doing so breaks other stuff, such as Seaboard's
* display, likely due to clock_set_pllout()'s call to
* clk_get_divider(). Attempting to fix that by making
* clock_set_pllout() subtract 2 from clk_get_divider()'s
* return value doesn't help. In summary this clock driver is
* quite broken but I'm afraid I have no idea how to fix it
* without completely replacing it.
*
* Be careful to avoid a divide by zero error.
*/
if (div >= 1)
div -= 2;
break;
#endif
default:
break;
}
return get_rate_from_divider(parent_rate, div);
}
/**
* Find the best available 7.1 format divisor given a parent clock rate and
* required child clock rate. This function assumes that a second-stage
* divisor is available which can divide by powers of 2 from 1 to 256.
*
* @param divider_bits number of divider bits (8 or 16)
* @param parent_rate clock rate of parent clock in Hz
* @param rate required clock rate for this clock
* @param extra_div value for the second-stage divisor (not set if this
* function returns -1.
* @return divider which should be used, or -1 if nothing is valid
*
*/
static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
unsigned long rate, int *extra_div)
{
int shift;
int best_divider = -1;
int best_error = rate;
/* try dividers from 1 to 256 and find closest match */
for (shift = 0; shift <= 8 && best_error > 0; shift++) {
unsigned divided_parent = parent_rate >> shift;
int divider = clk_get_divider(divider_bits, divided_parent,
rate);
unsigned effective_rate = get_rate_from_divider(divided_parent,
divider);
int error = rate - effective_rate;
/* Given a valid divider, look for the lowest error */
if (divider != -1 && error < best_error) {
best_error = error;
*extra_div = 1 << shift;
best_divider = divider;
}
}
/* return what we found - *extra_div will already be set */
return best_divider;
}
/**
* Adjust peripheral PLL to use the given divider and source.
*
* @param periph_id peripheral to adjust
* @param source Source number (0-3 or 0-7)
* @param mux_bits Number of mux bits (2 or 4)
* @param divider Required divider in 7.1 or 15.1 format
* @return 0 if ok, -1 on error (requesting a parent clock which is not valid
* for this peripheral)
*/
static int adjust_periph_pll(enum periph_id periph_id, int source,
int mux_bits, unsigned divider)
{
u32 *reg = get_periph_source_reg(periph_id);
clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
divider << OUT_CLK_DIVISOR_SHIFT);
udelay(1);
/* work out the source clock and set it */
if (source < 0)
return -1;
clock_ll_set_source_bits(periph_id, mux_bits, source);
udelay(2);
return 0;
}
enum clock_id clock_get_periph_parent(enum periph_id periph_id)
{
int err, mux_bits, divider_bits, type;
int source;
err = get_periph_clock_info(periph_id, &mux_bits, &divider_bits, &type);
if (err)
return CLOCK_ID_NONE;
source = clock_ll_get_source_bits(periph_id, mux_bits);
return get_periph_clock_id(periph_id, source);
}
unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
enum clock_id parent, unsigned rate, int *extra_div)
{
unsigned effective_rate;
int mux_bits, divider_bits, source;
int divider;
int xdiv = 0;
/* work out the source clock and set it */
source = get_periph_clock_source(periph_id, parent, &mux_bits,
&divider_bits);
divider = find_best_divider(divider_bits, pll_rate[parent],
rate, &xdiv);
if (extra_div)
*extra_div = xdiv;
assert(divider >= 0);
if (adjust_periph_pll(periph_id, source, mux_bits, divider))
return -1U;
debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
get_periph_source_reg(periph_id),
readl(get_periph_source_reg(periph_id)));
/* Check what we ended up with. This shouldn't matter though */
effective_rate = clock_get_periph_rate(periph_id, parent);
if (extra_div)
effective_rate /= *extra_div;
if (rate != effective_rate)
debug("Requested clock rate %u not honored (got %u)\n",
rate, effective_rate);
return effective_rate;
}
unsigned clock_start_periph_pll(enum periph_id periph_id,
enum clock_id parent, unsigned rate)
{
unsigned effective_rate;
reset_set_enable(periph_id, 1);
clock_enable(periph_id);
effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
NULL);
reset_set_enable(periph_id, 0);
return effective_rate;
}
void clock_enable(enum periph_id clkid)
{
clock_set_enable(clkid, 1);
}
void clock_disable(enum periph_id clkid)
{
clock_set_enable(clkid, 0);
}
void reset_periph(enum periph_id periph_id, int us_delay)
{
/* Put peripheral into reset */
reset_set_enable(periph_id, 1);
udelay(us_delay);
/* Remove reset */
reset_set_enable(periph_id, 0);
udelay(us_delay);
}
void reset_cmplx_set_enable(int cpu, int which, int reset)
{
struct clk_rst_ctlr *clkrst =
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
u32 mask;
/* Form the mask, which depends on the cpu chosen (2 or 4) */
assert(cpu >= 0 && cpu < MAX_NUM_CPU);
mask = which << cpu;
/* either enable or disable those reset for that CPU */
if (reset)
writel(mask, &clkrst->crc_cpu_cmplx_set);
else
writel(mask, &clkrst->crc_cpu_cmplx_clr);
}
unsigned int __weak clk_m_get_rate(unsigned int parent_rate)
{
return parent_rate;
}
unsigned clock_get_rate(enum clock_id clkid)
{
struct clk_pll *pll;
u32 base, divm;
u64 parent_rate, rate;
struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];
parent_rate = osc_freq[clock_get_osc_freq()];
if (clkid == CLOCK_ID_OSC)
return parent_rate;
if (clkid == CLOCK_ID_CLK_M)
return clk_m_get_rate(parent_rate);
pll = get_pll(clkid);
if (!pll)
return 0;
base = readl(&pll->pll_base);
rate = parent_rate * ((base >> pllinfo->n_shift) & pllinfo->n_mask);
divm = (base >> pllinfo->m_shift) & pllinfo->m_mask;
/*
* PLLU uses p_mask/p_shift for VCO on all but T210,
* T210 uses normal DIVP. Handled in pllinfo table.
*/
#ifdef CONFIG_TEGRA210
/*
* PLLP's primary output (pllP_out0) on T210 is the VCO, and divp is
* not applied. pllP_out2 does have divp applied. All other pllP_outN
* are divided down from pllP_out0. We only support pllP_out0 in
* U-Boot at the time of writing this comment.
*/
if (clkid != CLOCK_ID_PERIPH)
#endif
divm <<= (base >> pllinfo->p_shift) & pllinfo->p_mask;
do_div(rate, divm);
return rate;
}
/**
* Set the output frequency you want for each PLL clock.
* PLL output frequencies are programmed by setting their N, M and P values.
* The governing equations are:
* VCO = (Fi / m) * n, Fo = VCO / (2^p)
* where Fo is the output frequency from the PLL.
* Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
* 216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
* Please see Tegra TRM section 5.3 to get the detail for PLL Programming
*
* @param n PLL feedback divider(DIVN)
* @param m PLL input divider(DIVN)
* @param p post divider(DIVP)
* @param cpcon base PLL charge pump(CPCON)
* @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
* be overridden), 1 if PLL is already correct
*/
int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
{
u32 base_reg, misc_reg;
struct clk_pll *pll;
struct clk_pll_info *pllinfo = &tegra_pll_info_table[clkid];
pll = get_pll(clkid);
base_reg = readl(&pll->pll_base);
/* Set BYPASS, m, n and p to PLL_BASE */
base_reg &= ~(pllinfo->m_mask << pllinfo->m_shift);
base_reg |= m << pllinfo->m_shift;
base_reg &= ~(pllinfo->n_mask << pllinfo->n_shift);
base_reg |= n << pllinfo->n_shift;
base_reg &= ~(pllinfo->p_mask << pllinfo->p_shift);
base_reg |= p << pllinfo->p_shift;
if (clkid == CLOCK_ID_PERIPH) {
/*
* If the PLL is already set up, check that it is correct
* and record this info for clock_verify() to check.
*/
if (base_reg & PLL_BASE_OVRRIDE_MASK) {
base_reg |= PLL_ENABLE_MASK;
if (base_reg != readl(&pll->pll_base))
pllp_valid = 0;
return pllp_valid ? 1 : -1;
}
base_reg |= PLL_BASE_OVRRIDE_MASK;
}
base_reg |= PLL_BYPASS_MASK;
writel(base_reg, &pll->pll_base);
/* Set cpcon (KCP) to PLL_MISC */
misc_reg = readl(&pll->pll_misc);
misc_reg &= ~(pllinfo->kcp_mask << pllinfo->kcp_shift);
misc_reg |= cpcon << pllinfo->kcp_shift;
writel(misc_reg, &pll->pll_misc);
/* Enable PLL */
base_reg |= PLL_ENABLE_MASK;
writel(base_reg, &pll->pll_base);
/* Disable BYPASS */
base_reg &= ~PLL_BYPASS_MASK;
writel(base_reg, &pll->pll_base);
return 0;
}
void clock_ll_start_uart(enum periph_id periph_id)
{
/* Assert UART reset and enable clock */
reset_set_enable(periph_id, 1);
clock_enable(periph_id);
clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
/* wait for 2us */
udelay(2);
/* De-assert reset to UART */
reset_set_enable(periph_id, 0);
}
#if CONFIG_IS_ENABLED(OF_CONTROL)
int clock_decode_periph_id(struct udevice *dev)
{
enum periph_id id;
u32 cell[2];
int err;
err = dev_read_u32_array(dev, "clocks", cell, ARRAY_SIZE(cell));
if (err)
return -1;
id = clk_id_to_periph_id(cell[1]);
assert(clock_periph_id_isvalid(id));
return id;
}
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
int clock_verify(void)
{
struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
u32 reg = readl(&pll->pll_base);
if (!pllp_valid) {
printf("Warning: PLLP %x is not correct\n", reg);
return -1;
}
debug("PLLP %x is correct\n", reg);
return 0;
}
void clock_init(void)
{
int i;
pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
pll_rate[CLOCK_ID_USB] = clock_get_rate(CLOCK_ID_USB);
pll_rate[CLOCK_ID_DISPLAY] = clock_get_rate(CLOCK_ID_DISPLAY);
pll_rate[CLOCK_ID_XCPU] = clock_get_rate(CLOCK_ID_XCPU);
pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
pll_rate[CLOCK_ID_CLK_M] = clock_get_rate(CLOCK_ID_CLK_M);
debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
debug("CLKM = %d\n", pll_rate[CLOCK_ID_CLK_M]);
debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]);
debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
debug("PLLU = %d\n", pll_rate[CLOCK_ID_USB]);
debug("PLLD = %d\n", pll_rate[CLOCK_ID_DISPLAY]);
debug("PLLX = %d\n", pll_rate[CLOCK_ID_XCPU]);
for (i = 0; periph_clk_init_table[i].periph_id != -1; i++) {
enum periph_id periph_id;
enum clock_id parent;
int source, mux_bits, divider_bits;
periph_id = periph_clk_init_table[i].periph_id;
parent = periph_clk_init_table[i].parent_clock_id;
source = get_periph_clock_source(periph_id, parent, &mux_bits,
&divider_bits);
clock_ll_set_source_bits(periph_id, mux_bits, source);
}
}
static void set_avp_clock_source(u32 src)
{
struct clk_rst_ctlr *clkrst =
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
u32 val;
val = (src << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) |
(src << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) |
(src << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) |
(src << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) |
(SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT);
writel(val, &clkrst->crc_sclk_brst_pol);
udelay(3);
}
/*
* This function is useful on Tegra30, and any later SoCs that have compatible
* PLLP configuration registers.
* NOTE: Not used on Tegra210 - see tegra210_setup_pllp in T210 clock.c
*/
void tegra30_set_up_pllp(void)
{
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
u32 reg;
/*
* Based on the Tegra TRM, the system clock (which is the AVP clock) can
* run up to 275MHz. On power on, the default sytem clock source is set
* to PLLP_OUT0. This function sets PLLP's (hence PLLP_OUT0's) rate to
* 408MHz which is beyond system clock's upper limit.
*
* The fix is to set the system clock to CLK_M before initializing PLLP,
* and then switch back to PLLP_OUT4, which has an appropriate divider
* configured, after PLLP has been configured
*/
set_avp_clock_source(SCLK_SOURCE_CLKM);
/*
* PLLP output frequency set to 408Mhz
* PLLC output frequency set to 228Mhz
*/
switch (clock_get_osc_freq()) {
case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
clock_set_rate(CLOCK_ID_CGENERAL, 456, 12, 1, 8);
break;
case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
break;
case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
break;
case CLOCK_OSC_FREQ_19_2:
default:
/*
* These are not supported. It is too early to print a
* message and the UART likely won't work anyway due to the
* oscillator being wrong.
*/
break;
}
/* Set PLLP_OUT1, 2, 3 & 4 freqs to 9.6, 48, 102 & 204MHz */
/* OUT1, 2 */
/* Assert RSTN before enable */
reg = PLLP_OUT2_RSTN_EN | PLLP_OUT1_RSTN_EN;
writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
/* Set divisor and reenable */
reg = (IN_408_OUT_48_DIVISOR << PLLP_OUT2_RATIO)
| PLLP_OUT2_OVR | PLLP_OUT2_CLKEN | PLLP_OUT2_RSTN_DIS
| (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO)
| PLLP_OUT1_OVR | PLLP_OUT1_CLKEN | PLLP_OUT1_RSTN_DIS;
writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
/* OUT3, 4 */
/* Assert RSTN before enable */
reg = PLLP_OUT4_RSTN_EN | PLLP_OUT3_RSTN_EN;
writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
/* Set divisor and reenable */
reg = (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO)
| PLLP_OUT4_OVR | PLLP_OUT4_CLKEN | PLLP_OUT4_RSTN_DIS
| (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO)
| PLLP_OUT3_OVR | PLLP_OUT3_CLKEN | PLLP_OUT3_RSTN_DIS;
writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
set_avp_clock_source(SCLK_SOURCE_PLLP_OUT4);
}
int clock_external_output(int clk_id)
{
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
if (clk_id >= 1 && clk_id <= 3) {
setbits_le32(&pmc->pmc_clk_out_cntrl,
1 << (2 + (clk_id - 1) * 8));
} else {
printf("%s: Unknown output clock id %d\n", __func__, clk_id);
return -EINVAL;
}
return 0;
}
__weak bool clock_early_init_done(void)
{
return true;
}