u-boot/include/asm-ppc/e300.h
Rafal Jaworowski 8993e54b6f [ADS5121] Support for the ADS5121 board
The following MPC5121e subsystems are supported:

- low-level CPU init
- NOR Boot Flash (common CFI driver)
- DDR SDRAM
- FEC
- I2C
- Watchdog

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
2007-07-27 14:43:59 +02:00

126 lines
4.2 KiB
C

/*
* Copyright 2004 Freescale Semiconductor, Inc.
* Liberty Eran (liberty@freescale.com)
*/
#ifndef __E300_H__
#define __E300_H__
#define PVR_E300C1 0x80830000
#define PVR_E300C2 0x80840000
#define PVR_E300C3 0x80850000
#define PVR_E300C4 0x80860000
/*
* Hardware Implementation-Dependent Register 0 (HID0)
*/
/* #define HID0 1008 already defined in processor.h */
#define HID0_MASK_MACHINE_CHECK 0x00000000
#define HID0_ENABLE_MACHINE_CHECK 0x80000000
#define HID0_DISABLE_CACHE_PARITY 0x00000000
#define HID0_ENABLE_CACHE_PARITY 0x40000000
#define HID0_DISABLE_ADDRESS_PARITY 0x00000000 /* on mpc8349ads must be disabled */
#define HID0_ENABLE_ADDRESS_PARITY 0x20000000
#define HID0_DISABLE_DATA_PARITY 0x00000000 /* on mpc8349ads must be disabled */
#define HID0_ENABLE_DATE_PARITY 0x10000000
#define HID0_CORE_CLK_OUT 0x00000000
#define HID0_CORE_CLK_OUT_DIV_2 0x08000000
#define HID0_ENABLE_ARTRY_OUT_PRECHARGE 0x00000000 /* on mpc8349ads must be enabled */
#define HID0_DISABLE_ARTRY_OUT_PRECHARGE 0x01000000
#define HID0_DISABLE_DOSE_MODE 0x00000000
#define HID0_ENABLE_DOSE_MODE 0x00800000
#define HID0_DISABLE_NAP_MODE 0x00000000
#define HID0_ENABLE_NAP_MODE 0x00400000
#define HID0_DISABLE_SLEEP_MODE 0x00000000
#define HID0_ENABLE_SLEEP_MODE 0x00200000
#define HID0_DISABLE_DYNAMIC_POWER_MANAGMENT 0x00000000
#define HID0_ENABLE_DYNAMIC_POWER_MANAGMENT 0x00100000
#define HID0_SOFT_RESET 0x00010000
#define HID0_DISABLE_INSTRUCTION_CACHE 0x00000000
#define HID0_ENABLE_INSTRUCTION_CACHE 0x00008000
#define HID0_DISABLE_DATA_CACHE 0x00000000
#define HID0_ENABLE_DATA_CACHE 0x00004000
#define HID0_LOCK_INSTRUCTION_CACHE 0x00002000
#define HID0_LOCK_DATA_CACHE 0x00001000
#define HID0_INVALIDATE_INSTRUCTION_CACHE 0x00000800
#define HID0_INVALIDATE_DATA_CACHE 0x00000400
#define HID0_DISABLE_M_BIT 0x00000000
#define HID0_ENABLE_M_BIT 0x00000080
#define HID0_FBIOB 0x00000010
#define HID0_DISABLE_ADDRESS_BROADCAST 0x00000000
#define HID0_ENABLE_ADDRESS_BROADCAST 0x00000008
#define HID0_ENABLE_NOOP_DCACHE_INSTRUCTION 0x00000000
#define HID0_DISABLE_NOOP_DCACHE_INSTRUCTION 0x00000001
/*
* Hardware Implementation-Dependent Register 2 (HID2)
*/
#define HID2 1011
#define HID2_LET 0x08000000
#define HID2_HBE 0x00040000
#define HID2_IWLCK_000 0x00000000 /* no ways locked */
#define HID2_IWLCK_001 0x00002000 /* way 0 locked */
#define HID2_IWLCK_010 0x00004000 /* way 0 through way 1 locked */
#define HID2_IWLCK_011 0x00006000 /* way 0 through way 2 locked */
#define HID2_IWLCK_100 0x00008000 /* way 0 through way 3 locked */
#define HID2_IWLCK_101 0x0000A000 /* way 0 through way 4 locked */
#define HID2_IWLCK_110 0x0000C000 /* way 0 through way 5 locked */
/* BAT (block address translation */
#define BATU_BEPI_MSK 0xfffe0000
#define BATU_BL_MSK 0x00001ffc
#define BATU_BL_128K 0x00000000
#define BATU_BL_256K 0x00000004
#define BATU_BL_512K 0x0000000c
#define BATU_BL_1M 0x0000001c
#define BATU_BL_2M 0x0000003c
#define BATU_BL_4M 0x0000007c
#define BATU_BL_8M 0x000000fc
#define BATU_BL_16M 0x000001fc
#define BATU_BL_32M 0x000003fc
#define BATU_BL_64M 0x000007fc
#define BATU_BL_128M 0x00000ffc
#define BATU_BL_256M 0x00001ffc
#define BATU_VS 0x00000002
#define BATU_VP 0x00000001
#define BATL_BRPN_MSK 0xfffe0000
#define BATL_WIMG_MSK 0x00000078
#define BATL_WRITETHROUGH 0x00000040
#define BATL_CACHEINHIBIT 0x00000020
#define BATL_MEMCOHERENCE 0x00000010
#define BATL_GUARDEDSTORAGE 0x00000008
#define BATL_PP_MSK 0x00000003
#define BATL_PP_00 0x00000000 /* No access */
#define BATL_PP_01 0x00000001 /* Read-only */
#define BATL_PP_10 0x00000002 /* Read-write */
#define BATL_PP_11 0x00000003
#endif /* __E300_H__ */