u-boot/include/netdev.h
Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00

136 lines
4.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2008
* Benjamin Warren, biggerbadderben@gmail.com
*/
/*
* netdev.h - definitions an prototypes for network devices
*/
#ifndef _NETDEV_H_
#define _NETDEV_H_
#include <phy_interface.h>
struct udevice;
/*
* Board and CPU-specific initialization functions
* board_eth_init() has highest priority. cpu_eth_init() only
* gets called if board_eth_init() isn't instantiated or fails.
* Return values:
* 0: success
* -1: failure
*/
int board_eth_init(struct bd_info *bis);
int board_interface_eth_init(struct udevice *dev,
phy_interface_t interface_type);
int cpu_eth_init(struct bd_info *bis);
/* Driver initialization prototypes */
int at91emac_register(struct bd_info *bis, unsigned long iobase);
int ax88180_initialize(struct bd_info *bis);
int bcm_sf2_eth_register(struct bd_info *bis, u8 dev_num);
int bfin_EMAC_initialize(struct bd_info *bis);
int calxedaxgmac_initialize(u32 id, ulong base_addr);
int cs8900_initialize(u8 dev_num, int base_addr);
int dc21x4x_initialize(struct bd_info *bis);
int designware_initialize(ulong base_addr, u32 interface);
int dm9000_initialize(struct bd_info *bis);
int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
int e1000_initialize(struct bd_info *bis);
int eepro100_initialize(struct bd_info *bis);
int ep93xx_eth_initialize(u8 dev_num, int base_addr);
int eth_3com_initialize (struct bd_info * bis);
int ethoc_initialize(u8 dev_num, int base_addr);
int fec_initialize (struct bd_info *bis);
int fecmxc_initialize(struct bd_info *bis);
int fecmxc_initialize_multi(struct bd_info *bis, int dev_id, int phy_id,
uint32_t addr);
int ftmac100_initialize(struct bd_info *bits);
int ftmac110_initialize(struct bd_info *bits);
void gt6426x_eth_initialize(struct bd_info *bis);
int ks8851_mll_initialize(u8 dev_num, int base_addr);
int lan91c96_initialize(u8 dev_num, int base_addr);
int lpc32xx_eth_initialize(struct bd_info *bis);
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
int mcdmafec_initialize(struct bd_info *bis);
int mcffec_initialize(struct bd_info *bis);
int mvgbe_initialize(struct bd_info *bis);
int mvneta_initialize(struct bd_info *bis, int base_addr, int devnum,
int phy_addr);
int natsemi_initialize(struct bd_info *bis);
int ne2k_register(void);
int npe_initialize(struct bd_info *bis);
int ns8382x_initialize(struct bd_info *bis);
int pcnet_initialize(struct bd_info *bis);
int ppc_4xx_eth_initialize (struct bd_info *bis);
int rtl8139_initialize(struct bd_info *bis);
int rtl8169_initialize(struct bd_info *bis);
int scc_initialize(struct bd_info *bis);
int sh_eth_initialize(struct bd_info *bis);
int skge_initialize(struct bd_info *bis);
int smc91111_initialize(u8 dev_num, int base_addr);
int smc911x_initialize(u8 dev_num, int base_addr);
int uec_standard_init(struct bd_info *bis);
int uli526x_initialize(struct bd_info *bis);
int armada100_fec_register(unsigned long base_addr);
/* Boards with PCI network controllers can call this from their board_eth_init()
* function to initialize whatever's on board.
* Return value is total # of devices found */
static inline int pci_eth_init(struct bd_info *bis)
{
int num = 0;
#ifdef CONFIG_PCI
#ifdef CONFIG_EEPRO100
num += eepro100_initialize(bis);
#endif
#ifdef CONFIG_TULIP
num += dc21x4x_initialize(bis);
#endif
#ifdef CONFIG_E1000
num += e1000_initialize(bis);
#endif
#ifdef CONFIG_PCNET
num += pcnet_initialize(bis);
#endif
#ifdef CONFIG_NATSEMI
num += natsemi_initialize(bis);
#endif
#ifdef CONFIG_NS8382X
num += ns8382x_initialize(bis);
#endif
#if defined(CONFIG_RTL8139)
num += rtl8139_initialize(bis);
#endif
#if defined(CONFIG_RTL8169)
num += rtl8169_initialize(bis);
#endif
#if defined(CONFIG_ULI526X)
num += uli526x_initialize(bis);
#endif
#endif /* CONFIG_PCI */
return num;
}
struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id);
#ifdef CONFIG_PHYLIB
struct phy_device;
int fec_probe(struct bd_info *bd, int dev_id, uint32_t base_addr,
struct mii_dev *bus, struct phy_device *phydev);
#else
/*
* Allow FEC to fine-tune MII configuration on boards which require this.
*/
struct eth_device;
int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
#endif
#endif /* _NETDEV_H_ */