u-boot/arch/mips/dts/Makefile
Mauro Condarelli 3fd0231432 mips: Add support for SoM "VoCore2".
Small patch to add support for VoCore/VoCore2 board.

VoCore is open hardware and runs OpenWrt/LEDE.
It has WIFI, USB, UART, 20+ GPIOs but is only one inch square.
It will help you to make a smart house, study embedded system
or even make the tiniest router in the world.

Details about this SoM can be found at "https://vocore.io/v2.html".

Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-27 20:30:14 +02:00

43 lines
1.7 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0+
dtb-$(CONFIG_ARCH_MTMIPS) += \
gardena-smart-gateway-mt7688.dtb \
linkit-smart-7688.dtb
dtb-$(CONFIG_TARGET_AP121) += ap121.dtb
dtb-$(CONFIG_TARGET_AP143) += ap143.dtb
dtb-$(CONFIG_TARGET_AP152) += ap152.dtb
dtb-$(CONFIG_TARGET_BOSTON) += img,boston.dtb
dtb-$(CONFIG_TARGET_MALTA) += mti,malta.dtb
dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb
dtb-$(CONFIG_TARGET_XILFPGA) += nexys4ddr.dtb
dtb-$(CONFIG_BOARD_BROADCOM_BCM968380GERG) += brcm,bcm968380gerg.dtb
dtb-$(CONFIG_BOARD_COMTREND_AR5315U) += comtrend,ar-5315u.dtb
dtb-$(CONFIG_BOARD_COMTREND_AR5387UN) += comtrend,ar-5387un.dtb
dtb-$(CONFIG_BOARD_COMTREND_CT5361) += comtrend,ct-5361.dtb
dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb
dtb-$(CONFIG_BOARD_COMTREND_WAP5813N) += comtrend,wap-5813n.dtb
dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb
dtb-$(CONFIG_BOARD_MT7628_RFB) += mediatek,mt7628-rfb.dtb
dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb
dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb
dtb-$(CONFIG_BOARD_SFR_NB4_SER) += sfr,nb4-ser.dtb
dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
dtb-$(CONFIG_BOARD_VOCORE2) += vocore_vocore2.dtb
dtb-$(CONFIG_TARGET_JZ4780_CI20) += ci20.dtb
dtb-$(CONFIG_SOC_LUTON) += luton_pcb090.dtb luton_pcb091.dtb
dtb-$(CONFIG_SOC_OCELOT) += ocelot_pcb120.dtb ocelot_pcb123.dtb
dtb-$(CONFIG_SOC_JR2) += jr2_pcb110.dtb jr2_pcb111.dtb serval2_pcb112.dtb
dtb-$(CONFIG_SOC_SERVALT) += servalt_pcb116.dtb
dtb-$(CONFIG_SOC_SERVAL) += serval_pcb105.dtb serval_pcb106.dtb
targets += $(dtb-y)
# Add any required device tree compiler flags here
DTC_FLAGS +=
PHONY += dtbs
dtbs: $(addprefix $(obj)/, $(dtb-y))
@:
clean-files := *.dtb