u-boot/arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts
Marcel Ziswiler 0b42fdca2d imx8mp: synchronise device tree with linux
Synchronise device tree with linux v6.1-rc3.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8m{m,n,p}-venice-*
2022-11-08 17:35:00 +01:00

175 lines
3.8 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 NXP
* Copyright (c) 2019 Engicam srl
* Copyright (c) 2020 Amarula Solutions(India)
*/
/dts-v1/;
#include "imx8mp.dtsi"
#include "imx8mp-icore-mx8mp.dtsi"
#include <dt-bindings/usb/pd.h>
/ {
model = "Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit";
compatible = "engicam,icore-mx8mp-edimm2.2", "engicam,icore-mx8mp",
"fsl,imx8mp";
chosen {
stdout-path = &uart2;
};
reg_usb1_vbus: regulator-usb1 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb1>;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "usb1_host_vbus";
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "VSD_3V3";
};
};
/* Ethernet */
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
phy-handle = <&ethphy0>;
phy-mode = "rgmii-id";
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@7 {
compatible = "ethernet-phy-ieee802.3-c22";
micrel,led-mode = <0>;
reg = <7>;
};
};
};
/* console */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&usb3_phy0 {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&usb_dwc3_0 {
dr_mode = "host";
status = "okay";
};
&usb3_phy1 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&usb_dwc3_1 {
dr_mode = "host";
status = "okay";
};
/* SDCARD */
&usdhc2 {
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
pinctrl-names = "default" ;
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
vmmc-supply = <&reg_usdhc2_vmmc>;
status = "okay";
};
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x10
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x40
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x40
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140
MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140
MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS 0x140
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
>;
};
pinctrl_reg_usb1: regusb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x10
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
>;
};
};