u-boot/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
Tom Rini 98f92001b3 am33xx: Add required includes to some omap/am33xx code
- In arch/arm/cpu/armv7/omap-common/timer.c,
  drivers/mtd/nand/omap_gpmc.c and drivers/net/cpsw.c add #include files
  that the driver needs but had been relying on <config.h> to bring in.
- In arch/arm/cpu/armv7/omap-common/lowlevel_init.S add <config.h>
- In am335x_evm.h and pcm051.h don't globally include
  <asm/arch/hardware.h> and <asm/arch/cpu.h> but just <asm/arch/omap.h>
  as that is the only include which defines things the config uses.

Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Tom Rini <trini@ti.com>
2013-03-24 12:49:11 -04:00

90 lines
2.5 KiB
ArmAsm

/*
* Board specific setup info
*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
*
* Author :
* Aneesh V <aneesh@ti.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <asm/arch/omap.h>
#include <asm/arch/spl.h>
#include <linux/linkage.h>
ENTRY(save_boot_params)
/*
* See if the rom code passed pointer is valid:
* It is not valid if it is not in non-secure SRAM
* This may happen if you are booting with the help of
* debugger
*/
ldr r2, =NON_SECURE_SRAM_START
cmp r2, r0
bgt 1f
ldr r2, =NON_SECURE_SRAM_END
cmp r2, r0
blt 1f
/*
* store the boot params passed from rom code or saved
* and passed by SPL
*/
cmp r0, #0
beq 1f
ldr r1, =boot_params
str r0, [r1]
#ifdef CONFIG_SPL_BUILD
/* Store the boot device in spl_boot_device */
ldrb r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device
and r2, #BOOT_DEVICE_MASK
ldr r3, =boot_params
strb r2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device <- r1
/* boot mode is passed only for devices that can raw/fat mode */
cmp r2, #BOOT_DEVICE_XIP
blt 2f
cmp r2, #BOOT_DEVICE_MMC2
bgt 2f
/* Store the boot mode (raw/FAT) in omap_bootmode */
ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr
ldr r2, [r2, #DEV_DATA_PTR_OFFSET] @ get the pDeviceData ptr
ldr r2, [r2, #BOOT_MODE_OFFSET] @ get the boot mode
ldr r3, =omap_bootmode
str r2, [r3]
#endif
2:
ldrb r2, [r0, #CH_FLAGS_OFFSET]
ldr r3, =boot_params
strb r2, [r3, #CH_FLAGS_OFFSET]
1:
bx lr
ENDPROC(save_boot_params)
ENTRY(set_pl310_ctrl_reg)
PUSH {r4-r11, lr} @ save registers - ROM code may pollute
@ our registers
LDR r12, =0x102 @ Set PL310 control register - value in R0
.word 0xe1600070 @ SMC #0 - hand assembled because -march=armv5
@ call ROM Code API to set control register
POP {r4-r11, pc}
ENDPROC(set_pl310_ctrl_reg)