u-boot/arch/powerpc/cpu/mpc5xxx/i2c.c
Heiko Schocher 0091337932 i2c, mpc5xxx: add multibus support
Tested on upcoming hydra (mpc5200 based) board.

Signed-off-by: Heiko Schocher <hs@denx.de>
2010-11-17 08:03:56 +01:00

485 lines
10 KiB
C

/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_HARD_I2C
#include <mpc5xxx.h>
#include <i2c.h>
#if !defined(CONFIG_I2C_MULTI_BUS)
#if (CONFIG_SYS_I2C_MODULE == 2)
#define I2C_BASE MPC5XXX_I2C2
#elif (CONFIG_SYS_I2C_MODULE == 1)
#define I2C_BASE MPC5XXX_I2C1
#else
#error CONFIG_SYS_I2C_MODULE is not properly configured
#endif
#else
static unsigned int i2c_bus_num __attribute__ ((section (".data"))) =
CONFIG_SYS_SPD_BUS_NUM;
static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED,
CONFIG_SYS_I2C_SPEED};
static const unsigned long i2c_dev[2] = {
MPC5XXX_I2C1,
MPC5XXX_I2C2,
};
#define I2C_BASE ((struct mpc5xxx_i2c *)i2c_dev[i2c_bus_num])
#endif
#define I2C_TIMEOUT 6667
#define I2C_RETRIES 3
struct mpc5xxx_i2c_tap {
int scl2tap;
int tap2tap;
};
static int mpc_reg_in (volatile u32 *reg);
static void mpc_reg_out (volatile u32 *reg, int val, int mask);
static int wait_for_bb (void);
static int wait_for_pin (int *status);
static int do_address (uchar chip, char rdwr_flag);
static int send_bytes (uchar chip, char *buf, int len);
static int receive_bytes (uchar chip, char *buf, int len);
static int mpc_get_fdr (int);
static int mpc_reg_in(volatile u32 *reg)
{
int ret = *reg >> 24;
__asm__ __volatile__ ("eieio");
return ret;
}
static void mpc_reg_out(volatile u32 *reg, int val, int mask)
{
int tmp;
if (!mask) {
*reg = val << 24;
} else {
tmp = mpc_reg_in(reg);
*reg = ((tmp & ~mask) | (val & mask)) << 24;
}
__asm__ __volatile__ ("eieio");
return;
}
static int wait_for_bb(void)
{
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
int timeout = I2C_TIMEOUT;
int status;
status = mpc_reg_in(&regs->msr);
while (timeout-- && (status & I2C_BB)) {
#if 1
volatile int temp;
mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
temp = mpc_reg_in(&regs->mdr);
mpc_reg_out(&regs->mcr, 0, I2C_STA);
mpc_reg_out(&regs->mcr, 0, 0);
mpc_reg_out(&regs->mcr, I2C_EN, 0);
#endif
udelay(15);
status = mpc_reg_in(&regs->msr);
}
return (status & I2C_BB);
}
static int wait_for_pin(int *status)
{
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
int timeout = I2C_TIMEOUT;
*status = mpc_reg_in(&regs->msr);
while (timeout-- && !(*status & I2C_IF)) {
udelay(15);
*status = mpc_reg_in(&regs->msr);
}
if (!(*status & I2C_IF)) {
return -1;
}
mpc_reg_out(&regs->msr, 0, I2C_IF);
return 0;
}
static int do_address(uchar chip, char rdwr_flag)
{
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
int status;
chip <<= 1;
if (rdwr_flag) {
chip |= 1;
}
mpc_reg_out(&regs->mcr, I2C_TX, I2C_TX);
mpc_reg_out(&regs->mdr, chip, 0);
if (wait_for_pin(&status)) {
return -2;
}
if (status & I2C_RXAK) {
return -3;
}
return 0;
}
static int send_bytes(uchar chip, char *buf, int len)
{
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
int wrcount;
int status;
for (wrcount = 0; wrcount < len; ++wrcount) {
mpc_reg_out(&regs->mdr, buf[wrcount], 0);
if (wait_for_pin(&status)) {
break;
}
if (status & I2C_RXAK) {
break;
}
}
return !(wrcount == len);
}
static int receive_bytes(uchar chip, char *buf, int len)
{
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
int dummy = 1;
int rdcount = 0;
int status;
int i;
mpc_reg_out(&regs->mcr, 0, I2C_TX);
for (i = 0; i < len; ++i) {
buf[rdcount] = mpc_reg_in(&regs->mdr);
if (dummy) {
dummy = 0;
} else {
rdcount++;
}
if (wait_for_pin(&status)) {
return -4;
}
}
mpc_reg_out(&regs->mcr, I2C_TXAK, I2C_TXAK);
buf[rdcount++] = mpc_reg_in(&regs->mdr);
if (wait_for_pin(&status)) {
return -5;
}
mpc_reg_out(&regs->mcr, 0, I2C_TXAK);
return 0;
}
#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
#define FDR510(x) (u8) (((x & 0x20) >> 3) | (x & 0x3))
#define FDR432(x) (u8) ((x & 0x1C) >> 2)
/*
* Reset any i2c devices that may have been interrupted during a system reset.
* Normally this would be accomplished by clocking the line until SCL and SDA
* are released and then sending a start condtiion (From an Atmel datasheet).
* There is no direct access to the i2c pins so instead create start commands
* through the i2c interface. Send a start command then delay for the SDA Hold
* time, repeat this by disabling/enabling the bus a total of 9 times.
*/
static void send_reset(void)
{
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
int i;
u32 delay;
u8 fdr;
int SDA_Tap[] = { 3, 3, 4, 4, 1, 1, 2, 2};
struct mpc5xxx_i2c_tap scltap[] = {
{4, 1},
{4, 2},
{6, 4},
{6, 8},
{14, 16},
{30, 32},
{62, 64},
{126, 128}
};
fdr = (u8)mpc_reg_in(&regs->mfdr);
delay = scltap[FDR432(fdr)].scl2tap + ((SDA_Tap[FDR510(fdr)] - 1) * \
scltap[FDR432(fdr)].tap2tap) + 3;
for (i = 0; i < 9; i++) {
mpc_reg_out(&regs->mcr, I2C_EN|I2C_STA|I2C_TX, I2C_INIT_MASK);
udelay(delay);
mpc_reg_out(&regs->mcr, 0, I2C_INIT_MASK);
udelay(delay);
}
mpc_reg_out(&regs->mcr, I2C_EN, I2C_INIT_MASK);
}
#endif /* CONFIG_SYS_I2c_INIT_MPC5XXX */
/**************** I2C API ****************/
void i2c_init(int speed, int saddr)
{
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
mpc_reg_out(&regs->mcr, 0, 0);
mpc_reg_out(&regs->madr, saddr << 1, 0);
/* Set clock
*/
mpc_reg_out(&regs->mfdr, mpc_get_fdr(speed), 0);
/* Enable module
*/
mpc_reg_out(&regs->mcr, I2C_EN, I2C_INIT_MASK);
mpc_reg_out(&regs->msr, 0, I2C_IF);
#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
send_reset();
#endif
return;
}
static int mpc_get_fdr(int speed)
{
static int fdr = -1;
if (fdr == -1) {
ulong best_speed = 0;
ulong divider;
ulong ipb, scl;
ulong bestmatch = 0xffffffffUL;
int best_i = 0, best_j = 0, i, j;
int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8};
struct mpc5xxx_i2c_tap scltap[] = {
{4, 1},
{4, 2},
{6, 4},
{6, 8},
{14, 16},
{30, 32},
{62, 64},
{126, 128}
};
ipb = gd->ipb_clk;
for (i = 7; i >= 0; i--) {
for (j = 7; j >= 0; j--) {
scl = 2 * (scltap[j].scl2tap +
(SCL_Tap[i] - 1) * scltap[j].tap2tap + 2);
if (ipb <= speed*scl) {
if ((speed*scl - ipb) < bestmatch) {
bestmatch = speed*scl - ipb;
best_i = i;
best_j = j;
best_speed = ipb/scl;
}
}
}
}
divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
if (gd->flags & GD_FLG_RELOC) {
fdr = divider;
} else {
if (gd->have_console)
printf("%ld kHz, ", best_speed / 1000);
return divider;
}
}
return fdr;
}
int i2c_probe(uchar chip)
{
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
int i;
for (i = 0; i < I2C_RETRIES; i++) {
mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
if (! do_address(chip, 0)) {
mpc_reg_out(&regs->mcr, 0, I2C_STA);
udelay(500);
break;
}
mpc_reg_out(&regs->mcr, 0, I2C_STA);
udelay(500);
}
return (i == I2C_RETRIES);
}
int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
{
char xaddr[4];
struct mpc5xxx_i2c * regs = (struct mpc5xxx_i2c *)I2C_BASE;
int ret = -1;
xaddr[0] = (addr >> 24) & 0xFF;
xaddr[1] = (addr >> 16) & 0xFF;
xaddr[2] = (addr >> 8) & 0xFF;
xaddr[3] = addr & 0xFF;
if (wait_for_bb()) {
if (gd->have_console)
printf("i2c_read: bus is busy\n");
goto Done;
}
mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
if (do_address(chip, 0)) {
if (gd->have_console)
printf("i2c_read: failed to address chip\n");
goto Done;
}
if (send_bytes(chip, &xaddr[4-alen], alen)) {
if (gd->have_console)
printf("i2c_read: send_bytes failed\n");
goto Done;
}
mpc_reg_out(&regs->mcr, I2C_RSTA, I2C_RSTA);
if (do_address(chip, 1)) {
if (gd->have_console)
printf("i2c_read: failed to address chip\n");
goto Done;
}
if (receive_bytes(chip, (char *)buf, len)) {
if (gd->have_console)
printf("i2c_read: receive_bytes failed\n");
goto Done;
}
ret = 0;
Done:
mpc_reg_out(&regs->mcr, 0, I2C_STA);
return ret;
}
int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
{
char xaddr[4];
struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
int ret = -1;
xaddr[0] = (addr >> 24) & 0xFF;
xaddr[1] = (addr >> 16) & 0xFF;
xaddr[2] = (addr >> 8) & 0xFF;
xaddr[3] = addr & 0xFF;
if (wait_for_bb()) {
if (gd->have_console)
printf("i2c_write: bus is busy\n");
goto Done;
}
mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
if (do_address(chip, 0)) {
if (gd->have_console)
printf("i2c_write: failed to address chip\n");
goto Done;
}
if (send_bytes(chip, &xaddr[4-alen], alen)) {
if (gd->have_console)
printf("i2c_write: send_bytes failed\n");
goto Done;
}
if (send_bytes(chip, (char *)buf, len)) {
if (gd->have_console)
printf("i2c_write: send_bytes failed\n");
goto Done;
}
ret = 0;
Done:
mpc_reg_out(&regs->mcr, 0, I2C_STA);
return ret;
}
#if defined(CONFIG_I2C_MULTI_BUS)
int i2c_set_bus_num(unsigned int bus)
{
if (bus > 1)
return -1;
i2c_bus_num = bus;
i2c_init(i2c_bus_speed[bus], CONFIG_SYS_I2C_SLAVE);
return 0;
}
int i2c_set_bus_speed(unsigned int speed)
{
i2c_init(speed, CONFIG_SYS_I2C_SLAVE);
return 0;
}
unsigned int i2c_get_bus_num(void)
{
return i2c_bus_num;
}
unsigned int i2c_get_bus_speed(void)
{
return i2c_bus_speed[i2c_bus_num];
}
#endif
#endif /* CONFIG_HARD_I2C */