u-boot/board/colibri_pxa270/colibri_pxa270.c
Marek Vasut c7e61334bc PXA: Fix missing includes
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-09 01:15:21 +02:00

119 lines
2.5 KiB
C

/*
* Toradex Colibri PXA270 Support
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/hardware.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
/* ------------------------------------------------------------------------- */
/*
* Miscelaneous platform dependent initialisations
*/
extern struct serial_device serial_ffuart_device;
extern struct serial_device serial_btuart_device;
extern struct serial_device serial_stuart_device;
struct serial_device *default_serial_console (void)
{
return &serial_ffuart_device;
}
int board_init (void)
{
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
/* arch number of vpac270 */
gd->bd->bi_arch_number = MACH_TYPE_COLIBRI;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
return 0;
}
int dram_init (void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
#ifdef CONFIG_CMD_USB
int usb_board_init(void)
{
UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
UHCHR |= UHCHR_FSBIR;
while (UHCHR & UHCHR_FSBIR);
UHCHR &= ~UHCHR_SSE;
UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
/* Clear any OTG Pin Hold */
if (PSSR & PSSR_OTGPH)
PSSR |= PSSR_OTGPH;
UHCRHDA &= ~(0x200);
UHCRHDA |= 0x100;
/* Set port power control mask bits, only 3 ports. */
UHCRHDB |= (0x7<<17);
/* enable port 2 */
UP2OCR |= UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
return 0;
}
void usb_board_init_fail(void)
{
return;
}
void usb_board_stop(void)
{
UHCHR |= UHCHR_FHR;
udelay(11);
UHCHR &= ~UHCHR_FHR;
UHCCOMS |= 1;
udelay(10);
CKEN &= ~CKEN10_USBHOST;
return;
}
#endif
#ifdef CONFIG_DRIVER_DM9000
int board_eth_init(bd_t *bis)
{
return dm9000_initialize(bis);
}
#endif