u-boot/drivers/usb/host/ehci-mxc.c
Matthias Weisser dddb7c9ffd imx: Add support for USB EHCI on imx25
Adding support for USB host on imx25 using the internal PHY. Changing the name
of base address define for imx31 to get some unification.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2011-07-14 15:41:24 +02:00

149 lines
3.7 KiB
C

/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <common.h>
#include <usb.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <usb/ehci-fsl.h>
#include <errno.h>
#include "ehci.h"
#include "ehci-core.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#ifdef CONFIG_MX25
#define MX25_USB_CTRL_IP_PUE_DOWN_BIT (1<<6)
#define MX25_USB_CTRL_HSTD_BIT (1<<5)
#define MX25_USB_CTRL_USBTE_BIT (1<<4)
#define MX25_USB_CTRL_OCPOL_OTG_BIT (1<<3)
#endif
#ifdef CONFIG_MX31
#define MX31_OTG_SIC_SHIFT 29
#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
#define MX31_OTG_PM_BIT (1 << 24)
#define MX31_H2_SIC_SHIFT 21
#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT)
#define MX31_H2_PM_BIT (1 << 16)
#define MX31_H2_DT_BIT (1 << 5)
#define MX31_H1_SIC_SHIFT 13
#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
#define MX31_H1_PM_BIT (1 << 8)
#define MX31_H1_DT_BIT (1 << 4)
#endif
static int mxc_set_usbcontrol(int port, unsigned int flags)
{
unsigned int v;
#ifdef CONFIG_MX25
v = MX25_USB_CTRL_IP_PUE_DOWN_BIT | MX25_USB_CTRL_HSTD_BIT |
MX25_USB_CTRL_USBTE_BIT | MX25_USB_CTRL_OCPOL_OTG_BIT;
#endif
#ifdef CONFIG_MX31
v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
switch (port) {
case 0: /* OTG port */
v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT |
MX31_H1_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H1_DT_BIT;
break;
case 2: /* H2 port */
v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT |
MX31_H2_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_H2_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H2_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H2_DT_BIT;
break;
default:
return -EINVAL;
}
#endif
writel(v, IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
return 0;
}
int ehci_hcd_init(void)
{
struct usb_ehci *ehci;
#ifdef CONFIG_MX31
u32 tmp;
struct clock_control_regs *sc_regs =
(struct clock_control_regs *)CCM_BASE;
tmp = __raw_readl(&sc_regs->ccmr);
__raw_writel(__raw_readl(&sc_regs->ccmr) | (1 << 9), &sc_regs->ccmr) ;
#endif
udelay(80);
/* Take USB2 */
ehci = (struct usb_ehci *)(IMX_USB_BASE +
(0x200 * CONFIG_MXC_USB_PORT));
hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
hcor = (struct ehci_hcor *)((uint32_t) hccr +
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
setbits_le32(&ehci->usbmode, CM_HOST);
#ifdef CONFIG_MX31
setbits_le32(&ehci->control, USB_EN);
__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
#endif
mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
udelay(10000);
return 0;
}
/*
* Destroy the appropriate control structures corresponding
* the the EHCI host controller.
*/
int ehci_hcd_stop(void)
{
return 0;
}