u-boot/board/broadcom/bcm_ep/board.c
Jiandong Zheng 39d0ce0659 arm: bcmcygnus: Enable Ethernet support
Enable BCM SF2 ethernet and PHY for BCM Cygnus SoC

Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com>
Signed-off-by: Steve Rae <srae@broadcom.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-08-12 20:47:28 -04:00

80 lines
1.3 KiB
C

/*
* Copyright 2014 Broadcom Corporation.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <config.h>
#include <netdev.h>
#include <asm/system.h>
#include <asm/iproc-common/armpll.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* board_init - early hardware init
*/
int board_init(void)
{
/*
* Address of boot parameters passed to kernel
* Use default offset 0x100
*/
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
/*
* dram_init - sets u-boot's idea of sdram size
*/
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
}
int board_early_init_f(void)
{
uint32_t status = 0;
/* Setup PLL if required */
#if defined(CONFIG_ARMCLK)
armpll_config(CONFIG_ARMCLK);
#endif
return status;
}
#ifdef CONFIG_ARMV7_NONSEC
void smp_set_core_boot_addr(unsigned long addr, int corenr)
{
}
void smp_kick_all_cpus(void)
{
}
void smp_waitloop(unsigned previous_address)
{
}
#endif
#ifdef CONFIG_BCM_SF2_ETH
int board_eth_init(bd_t *bis)
{
int rc = -1;
printf("Registering BCM sf2 eth\n");
rc = bcm_sf2_eth_register(bis, 0);
return rc;
}
#endif