mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
f7ae49fc4f
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
428 lines
11 KiB
C
428 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
|
|
*
|
|
* Derived from linux/drivers/spi/spi-bcm63xx.c:
|
|
* Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org>
|
|
* Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <reset.h>
|
|
#include <wait_bit.h>
|
|
#include <asm/io.h>
|
|
|
|
/* BCM6348 SPI core */
|
|
#define SPI_6348_CLK 0x06
|
|
#define SPI_6348_CMD 0x00
|
|
#define SPI_6348_CTL 0x40
|
|
#define SPI_6348_CTL_SHIFT 6
|
|
#define SPI_6348_FILL 0x07
|
|
#define SPI_6348_IR_MASK 0x04
|
|
#define SPI_6348_IR_STAT 0x02
|
|
#define SPI_6348_RX 0x80
|
|
#define SPI_6348_RX_SIZE 0x3f
|
|
#define SPI_6348_TX 0x41
|
|
#define SPI_6348_TX_SIZE 0x3f
|
|
|
|
/* BCM6358 SPI core */
|
|
#define SPI_6358_CLK 0x706
|
|
#define SPI_6358_CMD 0x700
|
|
#define SPI_6358_CTL 0x000
|
|
#define SPI_6358_CTL_SHIFT 14
|
|
#define SPI_6358_FILL 0x707
|
|
#define SPI_6358_IR_MASK 0x702
|
|
#define SPI_6358_IR_STAT 0x704
|
|
#define SPI_6358_RX 0x400
|
|
#define SPI_6358_RX_SIZE 0x220
|
|
#define SPI_6358_TX 0x002
|
|
#define SPI_6358_TX_SIZE 0x21e
|
|
|
|
/* SPI Clock register */
|
|
#define SPI_CLK_SHIFT 0
|
|
#define SPI_CLK_20MHZ (0 << SPI_CLK_SHIFT)
|
|
#define SPI_CLK_0_391MHZ (1 << SPI_CLK_SHIFT)
|
|
#define SPI_CLK_0_781MHZ (2 << SPI_CLK_SHIFT)
|
|
#define SPI_CLK_1_563MHZ (3 << SPI_CLK_SHIFT)
|
|
#define SPI_CLK_3_125MHZ (4 << SPI_CLK_SHIFT)
|
|
#define SPI_CLK_6_250MHZ (5 << SPI_CLK_SHIFT)
|
|
#define SPI_CLK_12_50MHZ (6 << SPI_CLK_SHIFT)
|
|
#define SPI_CLK_25MHZ (7 << SPI_CLK_SHIFT)
|
|
#define SPI_CLK_MASK (7 << SPI_CLK_SHIFT)
|
|
#define SPI_CLK_SSOFF_SHIFT 3
|
|
#define SPI_CLK_SSOFF_2 (2 << SPI_CLK_SSOFF_SHIFT)
|
|
#define SPI_CLK_SSOFF_MASK (7 << SPI_CLK_SSOFF_SHIFT)
|
|
#define SPI_CLK_BSWAP_SHIFT 7
|
|
#define SPI_CLK_BSWAP_MASK (1 << SPI_CLK_BSWAP_SHIFT)
|
|
|
|
/* SPI Command register */
|
|
#define SPI_CMD_OP_SHIFT 0
|
|
#define SPI_CMD_OP_START (0x3 << SPI_CMD_OP_SHIFT)
|
|
#define SPI_CMD_SLAVE_SHIFT 4
|
|
#define SPI_CMD_SLAVE_MASK (0xf << SPI_CMD_SLAVE_SHIFT)
|
|
#define SPI_CMD_PREPEND_SHIFT 8
|
|
#define SPI_CMD_PREPEND_BYTES 0xf
|
|
#define SPI_CMD_3WIRE_SHIFT 12
|
|
#define SPI_CMD_3WIRE_MASK (1 << SPI_CMD_3WIRE_SHIFT)
|
|
|
|
/* SPI Control register */
|
|
#define SPI_CTL_TYPE_FD_RW 0
|
|
#define SPI_CTL_TYPE_HD_W 1
|
|
#define SPI_CTL_TYPE_HD_R 2
|
|
|
|
/* SPI Interrupt registers */
|
|
#define SPI_IR_DONE_SHIFT 0
|
|
#define SPI_IR_DONE_MASK (1 << SPI_IR_DONE_SHIFT)
|
|
#define SPI_IR_RXOVER_SHIFT 1
|
|
#define SPI_IR_RXOVER_MASK (1 << SPI_IR_RXOVER_SHIFT)
|
|
#define SPI_IR_TXUNDER_SHIFT 2
|
|
#define SPI_IR_TXUNDER_MASK (1 << SPI_IR_TXUNDER_SHIFT)
|
|
#define SPI_IR_TXOVER_SHIFT 3
|
|
#define SPI_IR_TXOVER_MASK (1 << SPI_IR_TXOVER_SHIFT)
|
|
#define SPI_IR_RXUNDER_SHIFT 4
|
|
#define SPI_IR_RXUNDER_MASK (1 << SPI_IR_RXUNDER_SHIFT)
|
|
#define SPI_IR_CLEAR_MASK (SPI_IR_DONE_MASK |\
|
|
SPI_IR_RXOVER_MASK |\
|
|
SPI_IR_TXUNDER_MASK |\
|
|
SPI_IR_TXOVER_MASK |\
|
|
SPI_IR_RXUNDER_MASK)
|
|
|
|
enum bcm63xx_regs_spi {
|
|
SPI_CLK,
|
|
SPI_CMD,
|
|
SPI_CTL,
|
|
SPI_CTL_SHIFT,
|
|
SPI_FILL,
|
|
SPI_IR_MASK,
|
|
SPI_IR_STAT,
|
|
SPI_RX,
|
|
SPI_RX_SIZE,
|
|
SPI_TX,
|
|
SPI_TX_SIZE,
|
|
};
|
|
|
|
struct bcm63xx_spi_priv {
|
|
const unsigned long *regs;
|
|
void __iomem *base;
|
|
size_t tx_bytes;
|
|
uint8_t num_cs;
|
|
};
|
|
|
|
#define SPI_CLK_CNT 8
|
|
static const unsigned bcm63xx_spi_freq_table[SPI_CLK_CNT][2] = {
|
|
{ 25000000, SPI_CLK_25MHZ },
|
|
{ 20000000, SPI_CLK_20MHZ },
|
|
{ 12500000, SPI_CLK_12_50MHZ },
|
|
{ 6250000, SPI_CLK_6_250MHZ },
|
|
{ 3125000, SPI_CLK_3_125MHZ },
|
|
{ 1563000, SPI_CLK_1_563MHZ },
|
|
{ 781000, SPI_CLK_0_781MHZ },
|
|
{ 391000, SPI_CLK_0_391MHZ }
|
|
};
|
|
|
|
static int bcm63xx_spi_cs_info(struct udevice *bus, uint cs,
|
|
struct spi_cs_info *info)
|
|
{
|
|
struct bcm63xx_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
if (cs >= priv->num_cs) {
|
|
printf("no cs %u\n", cs);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm63xx_spi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct bcm63xx_spi_priv *priv = dev_get_priv(bus);
|
|
const unsigned long *regs = priv->regs;
|
|
|
|
if (mode & SPI_LSB_FIRST)
|
|
setbits_8(priv->base + regs[SPI_CLK], SPI_CLK_BSWAP_MASK);
|
|
else
|
|
clrbits_8(priv->base + regs[SPI_CLK], SPI_CLK_BSWAP_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm63xx_spi_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
struct bcm63xx_spi_priv *priv = dev_get_priv(bus);
|
|
const unsigned long *regs = priv->regs;
|
|
uint8_t clk_cfg;
|
|
int i;
|
|
|
|
/* default to lowest clock configuration */
|
|
clk_cfg = SPI_CLK_0_391MHZ;
|
|
|
|
/* find the closest clock configuration */
|
|
for (i = 0; i < SPI_CLK_CNT; i++) {
|
|
if (speed >= bcm63xx_spi_freq_table[i][0]) {
|
|
clk_cfg = bcm63xx_spi_freq_table[i][1];
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* write clock configuration */
|
|
clrsetbits_8(priv->base + regs[SPI_CLK],
|
|
SPI_CLK_SSOFF_MASK | SPI_CLK_MASK,
|
|
clk_cfg | SPI_CLK_SSOFF_2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* BCM63xx SPI driver doesn't allow keeping CS active between transfers since
|
|
* they are HW controlled.
|
|
* However, it provides a mechanism to prepend write transfers prior to read
|
|
* transfers (with a maximum prepend of 15 bytes), which is usually enough for
|
|
* SPI-connected flashes since reading requires prepending a write transfer of
|
|
* 5 bytes.
|
|
*
|
|
* This implementation takes advantage of the prepend mechanism and combines
|
|
* multiple transfers into a single one where possible (single/multiple write
|
|
* transfer(s) followed by a final read/write transfer).
|
|
* However, it's not possible to buffer reads, which means that read transfers
|
|
* should always be done as the final ones.
|
|
* On the other hand, take into account that combining write transfers into
|
|
* a single one is just buffering and doesn't require prepend mechanism.
|
|
*/
|
|
static int bcm63xx_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct bcm63xx_spi_priv *priv = dev_get_priv(dev->parent);
|
|
const unsigned long *regs = priv->regs;
|
|
size_t data_bytes = bitlen / 8;
|
|
|
|
if (flags & SPI_XFER_BEGIN) {
|
|
/* clear prepends */
|
|
priv->tx_bytes = 0;
|
|
|
|
/* initialize hardware */
|
|
writeb_be(0, priv->base + regs[SPI_IR_MASK]);
|
|
}
|
|
|
|
if (din) {
|
|
/* buffering reads not possible since cs is hw controlled */
|
|
if (!(flags & SPI_XFER_END)) {
|
|
printf("unable to buffer reads\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* check rx size */
|
|
if (data_bytes > regs[SPI_RX_SIZE]) {
|
|
printf("max rx bytes exceeded\n");
|
|
return -EMSGSIZE;
|
|
}
|
|
}
|
|
|
|
if (dout) {
|
|
/* check tx size */
|
|
if (priv->tx_bytes + data_bytes > regs[SPI_TX_SIZE]) {
|
|
printf("max tx bytes exceeded\n");
|
|
return -EMSGSIZE;
|
|
}
|
|
|
|
/* copy tx data */
|
|
memcpy_toio(priv->base + regs[SPI_TX] + priv->tx_bytes,
|
|
dout, data_bytes);
|
|
priv->tx_bytes += data_bytes;
|
|
}
|
|
|
|
if (flags & SPI_XFER_END) {
|
|
struct dm_spi_slave_platdata *plat =
|
|
dev_get_parent_platdata(dev);
|
|
uint16_t val, cmd;
|
|
int ret;
|
|
|
|
/* determine control config */
|
|
if (dout && !din) {
|
|
/* buffered write transfers */
|
|
val = priv->tx_bytes;
|
|
val |= (SPI_CTL_TYPE_HD_W << regs[SPI_CTL_SHIFT]);
|
|
priv->tx_bytes = 0;
|
|
} else {
|
|
if (dout && din && (flags & SPI_XFER_ONCE)) {
|
|
/* full duplex read/write */
|
|
val = data_bytes;
|
|
val |= (SPI_CTL_TYPE_FD_RW <<
|
|
regs[SPI_CTL_SHIFT]);
|
|
priv->tx_bytes = 0;
|
|
} else {
|
|
/* prepended write transfer */
|
|
val = data_bytes;
|
|
val |= (SPI_CTL_TYPE_HD_R <<
|
|
regs[SPI_CTL_SHIFT]);
|
|
if (priv->tx_bytes > SPI_CMD_PREPEND_BYTES) {
|
|
printf("max prepend bytes exceeded\n");
|
|
return -EMSGSIZE;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (regs[SPI_CTL_SHIFT] >= 8)
|
|
writew_be(val, priv->base + regs[SPI_CTL]);
|
|
else
|
|
writeb_be(val, priv->base + regs[SPI_CTL]);
|
|
|
|
/* clear interrupts */
|
|
writeb_be(SPI_IR_CLEAR_MASK, priv->base + regs[SPI_IR_STAT]);
|
|
|
|
/* issue the transfer */
|
|
cmd = SPI_CMD_OP_START;
|
|
cmd |= (plat->cs << SPI_CMD_SLAVE_SHIFT) & SPI_CMD_SLAVE_MASK;
|
|
cmd |= (priv->tx_bytes << SPI_CMD_PREPEND_SHIFT);
|
|
if (plat->mode & SPI_3WIRE)
|
|
cmd |= SPI_CMD_3WIRE_MASK;
|
|
writew_be(cmd, priv->base + regs[SPI_CMD]);
|
|
|
|
/* enable interrupts */
|
|
writeb_be(SPI_IR_DONE_MASK, priv->base + regs[SPI_IR_MASK]);
|
|
|
|
ret = wait_for_bit_8(priv->base + regs[SPI_IR_STAT],
|
|
SPI_IR_DONE_MASK, true, 1000, false);
|
|
if (ret) {
|
|
printf("interrupt timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
/* copy rx data */
|
|
if (din)
|
|
memcpy_fromio(din, priv->base + regs[SPI_RX],
|
|
data_bytes);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops bcm63xx_spi_ops = {
|
|
.cs_info = bcm63xx_spi_cs_info,
|
|
.set_mode = bcm63xx_spi_set_mode,
|
|
.set_speed = bcm63xx_spi_set_speed,
|
|
.xfer = bcm63xx_spi_xfer,
|
|
};
|
|
|
|
static const unsigned long bcm6348_spi_regs[] = {
|
|
[SPI_CLK] = SPI_6348_CLK,
|
|
[SPI_CMD] = SPI_6348_CMD,
|
|
[SPI_CTL] = SPI_6348_CTL,
|
|
[SPI_CTL_SHIFT] = SPI_6348_CTL_SHIFT,
|
|
[SPI_FILL] = SPI_6348_FILL,
|
|
[SPI_IR_MASK] = SPI_6348_IR_MASK,
|
|
[SPI_IR_STAT] = SPI_6348_IR_STAT,
|
|
[SPI_RX] = SPI_6348_RX,
|
|
[SPI_RX_SIZE] = SPI_6348_RX_SIZE,
|
|
[SPI_TX] = SPI_6348_TX,
|
|
[SPI_TX_SIZE] = SPI_6348_TX_SIZE,
|
|
};
|
|
|
|
static const unsigned long bcm6358_spi_regs[] = {
|
|
[SPI_CLK] = SPI_6358_CLK,
|
|
[SPI_CMD] = SPI_6358_CMD,
|
|
[SPI_CTL] = SPI_6358_CTL,
|
|
[SPI_CTL_SHIFT] = SPI_6358_CTL_SHIFT,
|
|
[SPI_FILL] = SPI_6358_FILL,
|
|
[SPI_IR_MASK] = SPI_6358_IR_MASK,
|
|
[SPI_IR_STAT] = SPI_6358_IR_STAT,
|
|
[SPI_RX] = SPI_6358_RX,
|
|
[SPI_RX_SIZE] = SPI_6358_RX_SIZE,
|
|
[SPI_TX] = SPI_6358_TX,
|
|
[SPI_TX_SIZE] = SPI_6358_TX_SIZE,
|
|
};
|
|
|
|
static const struct udevice_id bcm63xx_spi_ids[] = {
|
|
{
|
|
.compatible = "brcm,bcm6348-spi",
|
|
.data = (ulong)&bcm6348_spi_regs,
|
|
}, {
|
|
.compatible = "brcm,bcm6358-spi",
|
|
.data = (ulong)&bcm6358_spi_regs,
|
|
}, { /* sentinel */ }
|
|
};
|
|
|
|
static int bcm63xx_spi_child_pre_probe(struct udevice *dev)
|
|
{
|
|
struct bcm63xx_spi_priv *priv = dev_get_priv(dev->parent);
|
|
const unsigned long *regs = priv->regs;
|
|
struct spi_slave *slave = dev_get_parent_priv(dev);
|
|
struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev);
|
|
|
|
/* check cs */
|
|
if (plat->cs >= priv->num_cs) {
|
|
printf("no cs %u\n", plat->cs);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* max read/write sizes */
|
|
slave->max_read_size = regs[SPI_RX_SIZE];
|
|
slave->max_write_size = regs[SPI_TX_SIZE];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm63xx_spi_probe(struct udevice *dev)
|
|
{
|
|
struct bcm63xx_spi_priv *priv = dev_get_priv(dev);
|
|
const unsigned long *regs =
|
|
(const unsigned long *)dev_get_driver_data(dev);
|
|
struct reset_ctl rst_ctl;
|
|
struct clk clk;
|
|
int ret;
|
|
|
|
priv->base = dev_remap_addr(dev);
|
|
if (!priv->base)
|
|
return -EINVAL;
|
|
|
|
priv->regs = regs;
|
|
priv->num_cs = dev_read_u32_default(dev, "num-cs", 8);
|
|
|
|
/* enable clock */
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_free(&clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* perform reset */
|
|
ret = reset_get_by_index(dev, 0, &rst_ctl);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = reset_deassert(&rst_ctl);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = reset_free(&rst_ctl);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* initialize hardware */
|
|
writeb_be(0, priv->base + regs[SPI_IR_MASK]);
|
|
|
|
/* set fill register */
|
|
writeb_be(0xff, priv->base + regs[SPI_FILL]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_DRIVER(bcm63xx_spi) = {
|
|
.name = "bcm63xx_spi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = bcm63xx_spi_ids,
|
|
.ops = &bcm63xx_spi_ops,
|
|
.priv_auto_alloc_size = sizeof(struct bcm63xx_spi_priv),
|
|
.child_pre_probe = bcm63xx_spi_child_pre_probe,
|
|
.probe = bcm63xx_spi_probe,
|
|
};
|