mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
1a5c5b716c
Align the pin setup for sdhci0 with linux kernel. This means to have slew rate enable and high drive strength. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
224 lines
6.5 KiB
Text
224 lines
6.5 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* sam9x60.dtsi - Device Tree Include file for SAM9X60 SoC.
|
|
*
|
|
* Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
|
|
*
|
|
* Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
|
|
*/
|
|
|
|
#include "skeleton.dtsi"
|
|
#include <dt-bindings/dma/at91.h>
|
|
#include <dt-bindings/pinctrl/at91.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/clk/at91.h>
|
|
|
|
/{
|
|
model = "Microchip SAM9X60 SoC";
|
|
compatible = "microchip,sam9x60";
|
|
|
|
aliases {
|
|
serial0 = &dbgu;
|
|
gpio0 = &pioA;
|
|
gpio1 = &pioB;
|
|
gpio3 = &pioD;
|
|
spi0 = &qspi;
|
|
};
|
|
|
|
clocks {
|
|
slow_rc_osc: slow_rc_osc {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <18500>;
|
|
};
|
|
|
|
main_rc: main_rc {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <12000000>;
|
|
};
|
|
|
|
slow_xtal: slow_xtal {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
main_xtal: main_xtal {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
ahb {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
sdhci0: sdhci-host@80000000 {
|
|
compatible = "microchip,sam9x60-sdhci";
|
|
reg = <0x80000000 0x300>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
|
|
clock-names = "hclock", "multclk";
|
|
assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
|
|
assigned-clock-rates = <100000000>;
|
|
assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* ID_PLL_A_DIV */
|
|
bus-width = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sdhci0>;
|
|
};
|
|
|
|
apb {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
qspi: spi@f0014000 {
|
|
compatible = "microchip,sam9x60-qspi";
|
|
reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
|
|
reg-names = "qspi_base", "qspi_mmap";
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 18>; /* ID_QSPI */
|
|
clock-names = "pclk", "qspick";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
flx0: flexcom@f801c600 {
|
|
compatible = "atmel,sama5d2-flexcom";
|
|
reg = <0xf801c000 0x200>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xf801c000 0x800>;
|
|
status = "disabled";
|
|
};
|
|
|
|
macb0: ethernet@f802c000 {
|
|
compatible = "cdns,sam9x60-macb", "cdns,macb";
|
|
reg = <0xf802c000 0x100>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_macb0_rmii>;
|
|
clock-names = "hclk", "pclk";
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dbgu: serial@fffff200 {
|
|
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
|
reg = <0xfffff200 0x200>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_dbgu>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
|
|
clock-names = "usart";
|
|
};
|
|
|
|
pinctrl {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "microchip,sam9x60-pinctrl", "simple-bus";
|
|
ranges = <0xfffff400 0xfffff400 0x800>;
|
|
reg = <0xfffff400 0x200 /* pioA */
|
|
0xfffff600 0x200 /* pioB */
|
|
0xfffff800 0x200 /* pioC */
|
|
0xfffffa00 0x200>; /* pioD */
|
|
|
|
/* shared pinctrl settings */
|
|
dbgu {
|
|
pinctrl_dbgu: dbgu-0 {
|
|
atmel,pins =
|
|
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
|
|
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
};
|
|
|
|
macb0 {
|
|
pinctrl_macb0_rmii: macb0_rmii-0 {
|
|
atmel,pins =
|
|
<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
|
|
AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
|
|
AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
|
|
AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
|
|
AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
|
|
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
|
|
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
|
|
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
|
|
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
|
|
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
|
|
};
|
|
};
|
|
|
|
sdhci0 {
|
|
pinctrl_sdhci0: sdhci0 {
|
|
atmel,pins =
|
|
<AT91_PIOA 17 AT91_PERIPH_A
|
|
(AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA17 CK periph A with pullup */
|
|
AT91_PIOA 16 AT91_PERIPH_A
|
|
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA16 CMD periph A with pullup */
|
|
AT91_PIOA 15 AT91_PERIPH_A
|
|
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA15 DAT0 periph A */
|
|
AT91_PIOA 18 AT91_PERIPH_A
|
|
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA18 DAT1 periph A with pullup */
|
|
AT91_PIOA 19 AT91_PERIPH_A
|
|
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA) /* PA19 DAT2 periph A with pullup */
|
|
AT91_PIOA 20 AT91_PERIPH_A
|
|
(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA20 DAT3 periph A with pullup */
|
|
};
|
|
};
|
|
};
|
|
|
|
pioA: gpio@fffff400 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfffff400 0x200>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
|
|
};
|
|
|
|
pioB: gpio@fffff600 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfffff600 0x200>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
|
|
};
|
|
|
|
pioD: gpio@fffffa00 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfffffa00 0x200>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
|
|
};
|
|
|
|
pmc: pmc@fffffc00 {
|
|
compatible = "microchip,sam9x60-pmc";
|
|
reg = <0xfffffc00 0x200>;
|
|
#clock-cells = <2>;
|
|
clocks = <&clk32 1>, <&clk32 0>, <&main_xtal>, <&main_rc>;
|
|
clock-names = "td_slck", "md_slck", "main_xtal", "main_rc";
|
|
status = "okay";
|
|
};
|
|
|
|
pit: timer@fffffe40 {
|
|
compatible = "atmel,at91sam9260-pit";
|
|
reg = <0xfffffe40 0x10>;
|
|
clocks = <&pmc PMC_TYPE_CORE 11>; /* ID_MCK. */
|
|
};
|
|
|
|
clk32: sckc@fffffe50 {
|
|
compatible = "microchip,sam9x60-sckc";
|
|
reg = <0xfffffe50 0x4>;
|
|
clocks = <&slow_rc_osc>, <&slow_xtal>;
|
|
#clock-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
onewire_tm: onewire {
|
|
compatible = "w1-gpio";
|
|
status = "disabled";
|
|
};
|
|
};
|