u-boot/include/configs/imx6_logic.h
Adam Ford fd1a2d7e77 ARM: imx6q_logic: Allow optional arguments to cmd line
This adds an extra, optional environmental variable called
'optargs' which if enabled allow additional parameters to be
passed to the kernel (ie, quiet, cma=128M, etc.)
Each script that setups the bootargs will just append this.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-25 17:03:25 +02:00

174 lines
5.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2017 Logic PD, Inc.
*
* Configuration settings for the LogicPD i.MX6 SOM.
*/
#ifndef __IMX6LOGIC_CONFIG_H
#define __IMX6LOGIC_CONFIG_H
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONSOLE_DEV "ttymxc0"
#ifdef CONFIG_SPL
#include "imx6_spl.h"
#endif
#include "mx6_common.h"
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 2
/* Ethernet Configs */
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x13000000\0" \
"ramdisk_addr_r=0x14000000\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
"ramdisk_file=rootfs.cpio.uboot\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
"console=" CONSOLE_DEV "\0" \
"mmcdev=1\0" \
"mmcpart=1\0" \
"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
"mmcargs=setenv bootargs console=${console},${baudrate}" \
" root=PARTUUID=${uuid} rootwait rw ${mtdparts} ${optargs}\0" \
"nandargs=setenv bootargs console=${console},${baudrate}" \
" ubi.mtd=fs root=${nandroot} ${mtdparts} ${optargs}\0" \
"ramargs=setenv bootargs console=${console},${baudrate}" \
" root=/dev/ram rw ${mtdparts} ${optargs}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...;" \
" source\0" \
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};" \
" setenv kernelsize ${filesize}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdt_file}\0" \
"loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr_r}" \
" ${ramdisk_file}; setenv ramdisksize ${filesize}\0" \
"mmcboot=echo Booting from mmc...; run finduuid; run mmcargs;" \
"run loadimage; run loadfdt; bootz ${loadaddr} - ${fdt_addr_r}\0" \
"mmcramboot=run ramargs; run loadimage;" \
" run loadfdt; run loadramdisk;" \
" bootz ${loadaddr} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
"nandboot=echo Booting from nand ...; " \
" run nandargs;" \
" nand read ${loadaddr} kernel ${kernelsize};" \
" nand read ${fdt_addr_r} dtb;" \
" bootz ${loadaddr} - ${fdt_addr_r}\0" \
"nandramboot=echo Booting RAMdisk from nand ...; " \
" nand read ${ramdisk_addr_r} fs ${ramdisksize};" \
" nand read ${loadaddr} kernel ${kernelsize};" \
" nand read ${fdt_addr_r} dtb;" \
" run ramargs;" \
" bootz ${loadaddr} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs" \
" ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
"if test ${ip_dyn} = yes; then " \
"setenv get_cmd dhcp; " \
"else " \
"setenv get_cmd tftp; " \
"fi; " \
"${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr_r} ${fdt_file}; then " \
"bootz ${loadaddr} - ${fdt_addr_r}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
"bootz; " \
"fi;\0" \
"autoboot=mmc dev ${mmcdev};" \
"if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
"fi; " \
"else run netboot; fi"
#define CONFIG_BOOTCOMMAND \
"run autoboot"
#define CONFIG_ARP_TIMEOUT 200UL
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Environment organization */
#define CONFIG_ENV_SIZE (1024 * 1024)
#define CONFIG_ENV_OFFSET 0x400000
#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00500000
#define CONFIG_SYS_NAND_USE_FLASH_BBT
/* MTD device */
/* DMA stuff, needed for GPMI/MXS NAND support */
/* EEPROM contains serial no, MAC addr and other Logic PD info */
#define CONFIG_I2C_EEPROM
/* USB Configs */
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */
#endif
/* Falcon Mode */
#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
#endif /* __IMX6LOGIC_CONFIG_H */