u-boot/board/congatec/conga-qeval20-qa3-e3845/Kconfig
Stefan Roese 82ceba2ca2 x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support
This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM,
installed on the congatec Qseven 2.0 evaluation carrier board
(conga-QEVAL).

Its port is very similar to the MinnowboardMAX port and also uses
the Intel FSP as described in doc/README.x86.

Currently supported are the following interfaces / devices:
- UART (via Winbond legacy SuperIO chip on carrier board)
- Ethernet (PCIe Intel I210 / E1000)
- SPI including SPI NOR as boot-device
- USB 2.0
- SATA via U-Boot SCSI IF
- eMMC
- Video (HDMI output @ 800x600)
- PCIe

Not supported yet is:
- I2C
- USB 3.0

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:27 +08:00

28 lines
500 B
Text

if TARGET_CONGA_QEVAL20_QA3_E3845
config SYS_BOARD
default "conga-qeval20-qa3-e3845"
config SYS_VENDOR
default "congatec"
config SYS_SOC
default "baytrail"
config SYS_CONFIG_NAME
default "conga-qeval20-qa3-e3845"
config SYS_TEXT_BASE
default 0xfff00000 if !EFI_STUB
default 0x01110000 if EFI_STUB
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
select X86_RESET_VECTOR if !EFI_STUB
select INTEL_BAYTRAIL
select BOARD_ROMSIZE_KB_8192
config PCIE_ECAM_BASE
default 0xe0000000
endif