u-boot/board/barco/platinum/platinum_picon.c
Peng Fan 6d97dc10a8 imx: clock support enet2 anatop clock support
To i.MX6SX/UL, two ethernet interfaces are supported.
Add ENET2 clock support:
1. Introduce a new input parameter "fec_id", only 0 and 1 are allowed.
   To value 1, only i.MX6SX/UL can pass the check.
2. Modify board code who use this api to follow new api prototype.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Nikolaos Pasaloukos <Nikolaos.Pasaloukos@imgtec.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2015-09-02 15:29:14 +02:00

244 lines
7 KiB
C

/*
* Copyright (C) 2014, Barco (www.barco.com)
* Copyright (C) 2014 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/mxc_i2c.h>
#include <i2c.h>
#include <miiphy.h>
#include "platinum.h"
#define GPIO_IP_NCONFIG IMX_GPIO_NR(5, 18)
#define GPIO_HK_NCONFIG IMX_GPIO_NR(7, 13)
#define GPIO_LS_NCONFIG IMX_GPIO_NR(5, 19)
#define GPIO_I2C0_SEL0 IMX_GPIO_NR(5, 2)
#define GPIO_I2C0_SEL1 IMX_GPIO_NR(1, 11)
#define GPIO_I2C0_ENBN IMX_GPIO_NR(1, 13)
#define GPIO_I2C2_SEL0 IMX_GPIO_NR(1, 17)
#define GPIO_I2C2_SEL1 IMX_GPIO_NR(1, 20)
#define GPIO_I2C2_ENBN IMX_GPIO_NR(1, 14)
#define GPIO_USB_RESET IMX_GPIO_NR(1, 5)
iomux_v3_cfg_t const ecspi1_pads[] = {
MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(ECSPI1_PAD_CLK),
MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(ECSPI_PAD_MISO),
MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(ECSPI_PAD_MOSI),
MX6_PAD_CSI0_DAT7__ECSPI1_SS0 | MUX_PAD_CTRL(ECSPI_PAD_SS),
MX6_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(ECSPI_PAD_SS),
MX6_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(ECSPI_PAD_SS),
};
iomux_v3_cfg_t const ecspi2_pads[] = {
MX6_PAD_EIM_CS0__ECSPI2_SCLK | MUX_PAD_CTRL(ECSPI2_PAD_CLK),
MX6_PAD_EIM_OE__ECSPI2_MISO | MUX_PAD_CTRL(ECSPI_PAD_MISO),
MX6_PAD_EIM_CS1__ECSPI2_MOSI | MUX_PAD_CTRL(ECSPI_PAD_MOSI),
MX6_PAD_EIM_RW__ECSPI2_SS0 | MUX_PAD_CTRL(ECSPI_PAD_SS),
MX6_PAD_EIM_LBA__ECSPI2_SS1 | MUX_PAD_CTRL(ECSPI_PAD_SS),
};
iomux_v3_cfg_t const enet_pads[] = {
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
};
/* PHY nRESET */
iomux_v3_cfg_t const phy_reset_pad = {
MX6_PAD_SD1_DAT2__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
iomux_v3_cfg_t const uart1_pads[] = {
MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
iomux_v3_cfg_t const uart4_pads[] = {
MX6_PAD_CSI0_DAT12__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT13__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT16__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT17__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
};
iomux_v3_cfg_t const uart5_pads[] = {
MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT18__UART5_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT19__UART5_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
};
iomux_v3_cfg_t const i2c0_mux_pads[] = {
MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_SD2_CMD__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_SD2_DAT2__GPIO1_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
iomux_v3_cfg_t const i2c2_mux_pads[] = {
MX6_PAD_SD1_DAT1__GPIO1_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_SD2_DAT1__GPIO1_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
struct i2c_pads_info i2c_pad_info0 = {
.scl = {
.i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC_SCL,
.gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC_SCL,
.gp = IMX_GPIO_NR(5, 27)
},
.sda = {
.i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
.gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
.gp = IMX_GPIO_NR(5, 26)
}
};
struct i2c_pads_info i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC_SCL,
.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC_SCL,
.gp = IMX_GPIO_NR(1, 3)
},
.sda = {
.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC,
.gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC,
.gp = IMX_GPIO_NR(1, 6)
}
};
/*
* This enet related pin-muxing and GPIO handling is done
* in SPL U-Boot. For early initialization. And to give the
* PHY some time to come out of reset before the U-Boot
* ethernet driver tries to access its registers via MDIO.
*/
int platinum_setup_enet(void)
{
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
unsigned phy_reset = IMX_GPIO_NR(1, 19);
/* First configure PHY reset GPIO pin */
imx_iomux_v3_setup_pad(phy_reset_pad);
/* Reconfigure enet muxing while PHY is in reset */
gpio_direction_output(phy_reset, 0);
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
mdelay(10);
gpio_set_value(phy_reset, 1);
udelay(100);
/* set GPIO_16 as ENET_REF_CLK_OUT */
setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
return enable_fec_anatop_clock(0, ENET_50MHZ);
}
int platinum_setup_i2c(void)
{
imx_iomux_v3_setup_multiple_pads(i2c0_mux_pads,
ARRAY_SIZE(i2c0_mux_pads));
imx_iomux_v3_setup_multiple_pads(i2c2_mux_pads,
ARRAY_SIZE(i2c2_mux_pads));
mdelay(10);
/* Disable i2c mux 0 */
gpio_direction_output(GPIO_I2C0_SEL0, 0);
gpio_direction_output(GPIO_I2C0_SEL1, 0);
gpio_direction_output(GPIO_I2C0_ENBN, 1);
/* Disable i2c mux 1 */
gpio_direction_output(GPIO_I2C2_SEL0, 0);
gpio_direction_output(GPIO_I2C2_SEL1, 0);
gpio_direction_output(GPIO_I2C2_ENBN, 1);
udelay(10);
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
/* Disable all leds */
i2c_set_bus_num(0);
i2c_reg_write(0x60, 0x05, 0x55);
return 0;
}
int platinum_setup_spi(void)
{
imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
imx_iomux_v3_setup_multiple_pads(ecspi2_pads, ARRAY_SIZE(ecspi2_pads));
return 0;
}
int platinum_setup_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads));
return 0;
}
int platinum_phy_config(struct phy_device *phydev)
{
/* Use generic infrastructure, no specific setup */
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
int platinum_init_gpio(void)
{
/* Reset FPGA's */
gpio_direction_output(GPIO_IP_NCONFIG, 0);
gpio_direction_output(GPIO_HK_NCONFIG, 0);
gpio_direction_output(GPIO_LS_NCONFIG, 0);
udelay(3);
gpio_set_value(GPIO_IP_NCONFIG, 1);
gpio_set_value(GPIO_HK_NCONFIG, 1);
gpio_set_value(GPIO_LS_NCONFIG, 1);
/* no dmd configuration yet */
return 0;
}
int platinum_init_usb(void)
{
/* Reset usb hub */
gpio_direction_output(GPIO_USB_RESET, 0);
udelay(100);
gpio_set_value(GPIO_USB_RESET, 1);
return 0;
}
int platinum_init_finished(void)
{
/* Enable led 0 */
i2c_set_bus_num(0);
i2c_reg_write(0x60, 0x05, 0x54);
return 0;
}