u-boot/arch/x86/dts/conga-qeval20-qa3-e3845.dts
Stefan Roese 303dfc2e5e x86: conga-qeval20-qa3: Add SMBus support and SMSC2513 config code
This patch includes the following changes:

- Remove Designware I2C support from dts as its not used
- Configure SMBus PADs in dts
- Enable I2C commands and I2C support
- Configure SMSC2513 USB hub via SMBus upon startup
- Move environment location to match Minnowmax example
- Enhancement of the default environment

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-16 11:44:09 +08:00

299 lines
6.7 KiB
Text

/*
* Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include <dt-bindings/gpio/x86-gpio.h>
#include <dt-bindings/interrupt-router/intel-irq.h>
/include/ "skeleton.dtsi"
/include/ "serial.dtsi"
/include/ "rtc.dtsi"
/include/ "tsc_timer.dtsi"
/ {
model = "congatec-QEVAL20-QA3-E3845";
compatible = "congatec,qeval20-qa3-e3845", "intel,baytrail";
aliases {
serial0 = &serial;
spi0 = &spi;
};
config {
silent_console = <0>;
};
pch_pinctrl {
compatible = "intel,x86-pinctrl";
reg = <0 0>;
/*
* As of today, the latest version FSP (gold4) for BayTrail
* misses the PAD configuration of the SD controller's Card
* Detect signal. The default PAD value for the CD pin sets
* the pin to work in GPIO mode, which causes card detect
* status cannot be reflected by the Present State register
* in the SD controller (bit 16 & bit 18 are always zero).
*
* Configure this pin to function 1 (SD controller).
*/
sdmmc3_cd@0 {
pad-offset = <0x3a0>;
mode-func = <1>;
};
/* Add SMBus PAD configuration */
smbus_clk@0 {
pad-offset = <0x580>;
mode-func = <1>;
};
smbus_data@0 {
pad-offset = <0x5a0>;
mode-func = <1>;
};
};
chosen {
stdout-path = "/serial";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <0>;
intel,apic-id = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <1>;
intel,apic-id = <2>;
};
cpu@2 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <2>;
intel,apic-id = <4>;
};
cpu@3 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <3>;
intel,apic-id = <6>;
};
};
pci {
compatible = "intel,pci-baytrail", "pci-x86";
#address-cells = <3>;
#size-cells = <2>;
u-boot,dm-pre-reloc;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000
0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
0x01000000 0x0 0x2000 0x2000 0 0xe000>;
pch@1f,0 {
reg = <0x0000f800 0 0 0 0>;
compatible = "pci8086,0f1c", "intel,pch9";
#address-cells = <1>;
#size-cells = <1>;
irq-router {
compatible = "intel,irq-router";
intel,pirq-config = "ibase";
intel,ibase-offset = <0x50>;
intel,actl-addr = <0>;
intel,pirq-link = <8 8>;
intel,pirq-mask = <0xdee0>;
intel,pirq-routing = <
/* BayTrail PCI devices */
PCI_BDF(0, 2, 0) INTA PIRQA
PCI_BDF(0, 3, 0) INTA PIRQA
PCI_BDF(0, 16, 0) INTA PIRQA
PCI_BDF(0, 17, 0) INTA PIRQA
PCI_BDF(0, 18, 0) INTA PIRQA
PCI_BDF(0, 19, 0) INTA PIRQA
PCI_BDF(0, 20, 0) INTA PIRQA
PCI_BDF(0, 21, 0) INTA PIRQA
PCI_BDF(0, 22, 0) INTA PIRQA
PCI_BDF(0, 23, 0) INTA PIRQA
PCI_BDF(0, 24, 0) INTA PIRQA
PCI_BDF(0, 24, 1) INTC PIRQC
PCI_BDF(0, 24, 2) INTD PIRQD
PCI_BDF(0, 24, 3) INTB PIRQB
PCI_BDF(0, 24, 4) INTA PIRQA
PCI_BDF(0, 24, 5) INTC PIRQC
PCI_BDF(0, 24, 6) INTD PIRQD
PCI_BDF(0, 24, 7) INTB PIRQB
PCI_BDF(0, 26, 0) INTA PIRQA
PCI_BDF(0, 27, 0) INTA PIRQA
PCI_BDF(0, 28, 0) INTA PIRQA
PCI_BDF(0, 28, 1) INTB PIRQB
PCI_BDF(0, 28, 2) INTC PIRQC
PCI_BDF(0, 28, 3) INTD PIRQD
PCI_BDF(0, 29, 0) INTA PIRQA
PCI_BDF(0, 30, 0) INTA PIRQA
PCI_BDF(0, 30, 1) INTD PIRQD
PCI_BDF(0, 30, 2) INTB PIRQB
PCI_BDF(0, 30, 3) INTC PIRQC
PCI_BDF(0, 30, 4) INTD PIRQD
PCI_BDF(0, 30, 5) INTB PIRQB
PCI_BDF(0, 31, 3) INTB PIRQB
/*
* PCIe root ports downstream
* interrupts
*/
PCI_BDF(1, 0, 0) INTA PIRQA
PCI_BDF(1, 0, 0) INTB PIRQB
PCI_BDF(1, 0, 0) INTC PIRQC
PCI_BDF(1, 0, 0) INTD PIRQD
PCI_BDF(2, 0, 0) INTA PIRQB
PCI_BDF(2, 0, 0) INTB PIRQC
PCI_BDF(2, 0, 0) INTC PIRQD
PCI_BDF(2, 0, 0) INTD PIRQA
PCI_BDF(3, 0, 0) INTA PIRQC
PCI_BDF(3, 0, 0) INTB PIRQD
PCI_BDF(3, 0, 0) INTC PIRQA
PCI_BDF(3, 0, 0) INTD PIRQB
PCI_BDF(4, 0, 0) INTA PIRQD
PCI_BDF(4, 0, 0) INTB PIRQA
PCI_BDF(4, 0, 0) INTC PIRQB
PCI_BDF(4, 0, 0) INTD PIRQC
>;
};
spi: spi {
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich9-spi";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "stmicro,n25q064a",
"spi-flash";
memory-map = <0xff800000 0x00800000>;
rw-mrc-cache {
label = "rw-mrc-cache";
reg = <0x006f0000 0x00010000>;
};
};
};
gpioa {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0 0x20>;
bank-name = "A";
};
gpiob {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x20 0x20>;
bank-name = "B";
};
gpioc {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x40 0x20>;
bank-name = "C";
};
gpiod {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x60 0x20>;
bank-name = "D";
};
gpioe {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x80 0x20>;
bank-name = "E";
};
gpiof {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0xA0 0x20>;
bank-name = "F";
};
};
};
fsp {
compatible = "intel,baytrail-fsp";
fsp,mrc-init-tseg-size = <0>;
fsp,mrc-init-mmio-size = <0x800>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
fsp,emmc-boot-mode = <1>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart1;
fsp,enable-spi;
fsp,enable-sata;
fsp,sata-mode = <1>;
fsp,enable-lpe;
fsp,lpss-sio-enable-pci-mode;
fsp,enable-dma0;
fsp,enable-dma1;
fsp,enable-pwm0;
fsp,enable-pwm1;
fsp,igd-dvmt50-pre-alloc = <2>;
fsp,aperture-size = <2>;
fsp,gtt-size = <2>;
fsp,scc-enable-pci-mode;
fsp,os-selection = <4>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
fsp,enable-igd;
fsp,enable-memory-down;
fsp,memory-down-params {
compatible = "intel,baytrail-fsp-mdp";
fsp,dram-speed = <2>; /* 2=1333MHz */
fsp,dram-type = <1>; /* 1=DDR3L */
fsp,dimm-0-enable;
fsp,dimm-1-enable;
fsp,dimm-width = <1>; /* 1=x16, 2=x32 */
fsp,dimm-density = <2>; /* 2=4Gbit */
fsp,dimm-bus-width = <3>; /* 3=64bits */
fsp,dimm-sides = <0>; /* 0=1 ranks -> 0x2b */
/* These following values might need a re-visit */
fsp,dimm-tcl = <8>;
fsp,dimm-trpt-rcd = <8>;
fsp,dimm-twr = <8>;
fsp,dimm-twtr = <4>;
fsp,dimm-trrd = <6>;
fsp,dimm-trtp = <4>;
fsp,dimm-tfaw = <22>;
};
};
microcode {
update@0 {
#include "microcode/m0130673325.dtsi"
};
update@1 {
#include "microcode/m0130679907.dtsi"
};
};
};