mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 07:43:07 +00:00
a7e8220474
User can get correct HCLK frequency during driver probe stage by adding the following configuration in the device tree. "clocks = <&scu ASPEED_CLK_AHB>". Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
580 lines
15 KiB
C
580 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* (C) Copyright 2016 Google, Inc
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/scu_ast2500.h>
|
|
#include <dm/lists.h>
|
|
#include <dt-bindings/clock/aspeed-clock.h>
|
|
#include <dt-bindings/reset/ast2500-reset.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
|
|
/*
|
|
* MAC Clock Delay settings, taken from Aspeed SDK
|
|
*/
|
|
#define RGMII_TXCLK_ODLY 8
|
|
#define RMII_RXCLK_IDLY 2
|
|
|
|
/*
|
|
* TGMII Clock Duty constants, taken from Aspeed SDK
|
|
*/
|
|
#define RGMII2_TXCK_DUTY 0x66
|
|
#define RGMII1_TXCK_DUTY 0x64
|
|
|
|
#define D2PLL_DEFAULT_RATE (250 * 1000 * 1000)
|
|
|
|
/*
|
|
* AXI/AHB clock selection, taken from Aspeed SDK
|
|
*/
|
|
#define SCU_HWSTRAP_AXIAHB_DIV_SHIFT 9
|
|
#define SCU_HWSTRAP_AXIAHB_DIV_MASK (0x7 << SCU_HWSTRAP_AXIAHB_DIV_SHIFT)
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Clock divider/multiplier configuration struct.
|
|
* For H-PLL and M-PLL the formula is
|
|
* (Output Frequency) = CLKIN * ((M + 1) / (N + 1)) / (P + 1)
|
|
* M - Numerator
|
|
* N - Denumerator
|
|
* P - Post Divider
|
|
* They have the same layout in their control register.
|
|
*
|
|
* D-PLL and D2-PLL have extra divider (OD + 1), which is not
|
|
* yet needed and ignored by clock configurations.
|
|
*/
|
|
struct ast2500_div_config {
|
|
unsigned int num;
|
|
unsigned int denum;
|
|
unsigned int post_div;
|
|
};
|
|
|
|
/*
|
|
* Get the rate of the M-PLL clock from input clock frequency and
|
|
* the value of the M-PLL Parameter Register.
|
|
*/
|
|
static ulong ast2500_get_mpll_rate(ulong clkin, u32 mpll_reg)
|
|
{
|
|
const ulong num = (mpll_reg & SCU_MPLL_NUM_MASK) >> SCU_MPLL_NUM_SHIFT;
|
|
const ulong denum = (mpll_reg & SCU_MPLL_DENUM_MASK)
|
|
>> SCU_MPLL_DENUM_SHIFT;
|
|
const ulong post_div = (mpll_reg & SCU_MPLL_POST_MASK)
|
|
>> SCU_MPLL_POST_SHIFT;
|
|
|
|
return (clkin * ((num + 1) / (denum + 1))) / (post_div + 1);
|
|
}
|
|
|
|
/*
|
|
* Get the rate of the H-PLL clock from input clock frequency and
|
|
* the value of the H-PLL Parameter Register.
|
|
*/
|
|
static ulong ast2500_get_hpll_rate(ulong clkin, u32 hpll_reg)
|
|
{
|
|
const ulong num = (hpll_reg & SCU_HPLL_NUM_MASK) >> SCU_HPLL_NUM_SHIFT;
|
|
const ulong denum = (hpll_reg & SCU_HPLL_DENUM_MASK)
|
|
>> SCU_HPLL_DENUM_SHIFT;
|
|
const ulong post_div = (hpll_reg & SCU_HPLL_POST_MASK)
|
|
>> SCU_HPLL_POST_SHIFT;
|
|
|
|
return (clkin * ((num + 1) / (denum + 1))) / (post_div + 1);
|
|
}
|
|
|
|
static ulong ast2500_get_clkin(struct ast2500_scu *scu)
|
|
{
|
|
return readl(&scu->hwstrap) & SCU_HWSTRAP_CLKIN_25MHZ
|
|
? 25 * 1000 * 1000 : 24 * 1000 * 1000;
|
|
}
|
|
|
|
static u32 ast2500_get_hclk(ulong clkin, struct ast2500_scu *scu)
|
|
{
|
|
u32 hpll_reg = readl(&scu->h_pll_param);
|
|
ulong axi_div = 2;
|
|
u32 rate;
|
|
ulong ahb_div = 1 + ((readl(&scu->hwstrap)
|
|
& SCU_HWSTRAP_AXIAHB_DIV_MASK)
|
|
>> SCU_HWSTRAP_AXIAHB_DIV_SHIFT);
|
|
|
|
rate = ast2500_get_hpll_rate(clkin, hpll_reg);
|
|
|
|
return (rate / axi_div / ahb_div);
|
|
}
|
|
|
|
/**
|
|
* Get current rate or uart clock
|
|
*
|
|
* @scu SCU registers
|
|
* @uart_index UART index, 1-5
|
|
*
|
|
* Return: current setting for uart clock rate
|
|
*/
|
|
static ulong ast2500_get_uart_clk_rate(struct ast2500_scu *scu, int uart_index)
|
|
{
|
|
/*
|
|
* ast2500 datasheet is very confusing when it comes to UART clocks,
|
|
* especially when CLKIN = 25 MHz. The settings are in
|
|
* different registers and it is unclear how they interact.
|
|
*
|
|
* This has only been tested with default settings and CLKIN = 24 MHz.
|
|
*/
|
|
ulong uart_clkin;
|
|
|
|
if (readl(&scu->misc_ctrl2) &
|
|
(1 << (uart_index - 1 + SCU_MISC2_UARTCLK_SHIFT)))
|
|
uart_clkin = 192 * 1000 * 1000;
|
|
else
|
|
uart_clkin = 24 * 1000 * 1000;
|
|
|
|
if (readl(&scu->misc_ctrl1) & SCU_MISC_UARTCLK_DIV13)
|
|
uart_clkin /= 13;
|
|
|
|
return uart_clkin;
|
|
}
|
|
|
|
static ulong ast2500_clk_get_rate(struct clk *clk)
|
|
{
|
|
struct ast2500_clk_priv *priv = dev_get_priv(clk->dev);
|
|
ulong clkin = ast2500_get_clkin(priv->scu);
|
|
ulong rate;
|
|
|
|
switch (clk->id) {
|
|
case ASPEED_CLK_HPLL:
|
|
/*
|
|
* This ignores dynamic/static slowdown of ARMCLK and may
|
|
* be inaccurate.
|
|
*/
|
|
rate = ast2500_get_hpll_rate(clkin,
|
|
readl(&priv->scu->h_pll_param));
|
|
break;
|
|
case ASPEED_CLK_MPLL:
|
|
rate = ast2500_get_mpll_rate(clkin,
|
|
readl(&priv->scu->m_pll_param));
|
|
break;
|
|
case ASPEED_CLK_APB:
|
|
{
|
|
ulong apb_div = 4 + 4 * ((readl(&priv->scu->clk_sel1)
|
|
& SCU_PCLK_DIV_MASK)
|
|
>> SCU_PCLK_DIV_SHIFT);
|
|
rate = ast2500_get_hpll_rate(clkin,
|
|
readl(&priv->
|
|
scu->h_pll_param));
|
|
rate = rate / apb_div;
|
|
}
|
|
break;
|
|
case ASPEED_CLK_AHB:
|
|
rate = ast2500_get_hclk(clkin, priv->scu);
|
|
break;
|
|
case ASPEED_CLK_SDIO:
|
|
{
|
|
ulong apb_div = 4 + 4 * ((readl(&priv->scu->clk_sel1)
|
|
& SCU_SDCLK_DIV_MASK)
|
|
>> SCU_SDCLK_DIV_SHIFT);
|
|
rate = ast2500_get_hpll_rate(clkin,
|
|
readl(&priv->
|
|
scu->h_pll_param));
|
|
rate = rate / apb_div;
|
|
}
|
|
break;
|
|
case ASPEED_CLK_GATE_UART1CLK:
|
|
rate = ast2500_get_uart_clk_rate(priv->scu, 1);
|
|
break;
|
|
case ASPEED_CLK_GATE_UART2CLK:
|
|
rate = ast2500_get_uart_clk_rate(priv->scu, 2);
|
|
break;
|
|
case ASPEED_CLK_GATE_UART3CLK:
|
|
rate = ast2500_get_uart_clk_rate(priv->scu, 3);
|
|
break;
|
|
case ASPEED_CLK_GATE_UART4CLK:
|
|
rate = ast2500_get_uart_clk_rate(priv->scu, 4);
|
|
break;
|
|
case ASPEED_CLK_GATE_UART5CLK:
|
|
rate = ast2500_get_uart_clk_rate(priv->scu, 5);
|
|
break;
|
|
default:
|
|
debug("%s: unknown clk %ld\n", __func__, clk->id);
|
|
return -ENOENT;
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
struct ast2500_clock_config {
|
|
ulong input_rate;
|
|
ulong rate;
|
|
struct ast2500_div_config cfg;
|
|
};
|
|
|
|
static const struct ast2500_clock_config ast2500_clock_config_defaults[] = {
|
|
{ 24000000, 250000000, { .num = 124, .denum = 1, .post_div = 5 } },
|
|
};
|
|
|
|
static bool ast2500_get_clock_config_default(ulong input_rate,
|
|
ulong requested_rate,
|
|
struct ast2500_div_config *cfg)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ast2500_clock_config_defaults); i++) {
|
|
const struct ast2500_clock_config *default_cfg =
|
|
&ast2500_clock_config_defaults[i];
|
|
if (default_cfg->input_rate == input_rate &&
|
|
default_cfg->rate == requested_rate) {
|
|
*cfg = default_cfg->cfg;
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* @input_rate - the rate of input clock in Hz
|
|
* @requested_rate - desired output rate in Hz
|
|
* @div - this is an IN/OUT parameter, at input all fields of the config
|
|
* need to be set to their maximum allowed values.
|
|
* The result (the best config we could find), would also be returned
|
|
* in this structure.
|
|
*
|
|
* Return: The clock rate, when the resulting div_config is used.
|
|
*/
|
|
static ulong ast2500_calc_clock_config(ulong input_rate, ulong requested_rate,
|
|
struct ast2500_div_config *cfg)
|
|
{
|
|
/*
|
|
* The assumption is that kHz precision is good enough and
|
|
* also enough to avoid overflow when multiplying.
|
|
*/
|
|
const ulong input_rate_khz = input_rate / 1000;
|
|
const ulong rate_khz = requested_rate / 1000;
|
|
const struct ast2500_div_config max_vals = *cfg;
|
|
struct ast2500_div_config it = { 0, 0, 0 };
|
|
ulong delta = rate_khz;
|
|
ulong new_rate_khz = 0;
|
|
|
|
/*
|
|
* Look for a well known frequency first.
|
|
*/
|
|
if (ast2500_get_clock_config_default(input_rate, requested_rate, cfg))
|
|
return requested_rate;
|
|
|
|
for (; it.denum <= max_vals.denum; ++it.denum) {
|
|
for (it.post_div = 0; it.post_div <= max_vals.post_div;
|
|
++it.post_div) {
|
|
it.num = (rate_khz * (it.post_div + 1) / input_rate_khz)
|
|
* (it.denum + 1);
|
|
if (it.num > max_vals.num)
|
|
continue;
|
|
|
|
new_rate_khz = (input_rate_khz
|
|
* ((it.num + 1) / (it.denum + 1)))
|
|
/ (it.post_div + 1);
|
|
|
|
/* Keep the rate below requested one. */
|
|
if (new_rate_khz > rate_khz)
|
|
continue;
|
|
|
|
if (new_rate_khz - rate_khz < delta) {
|
|
delta = new_rate_khz - rate_khz;
|
|
*cfg = it;
|
|
if (delta == 0)
|
|
return new_rate_khz * 1000;
|
|
}
|
|
}
|
|
}
|
|
|
|
return new_rate_khz * 1000;
|
|
}
|
|
|
|
static ulong ast2500_configure_ddr(struct ast2500_scu *scu, ulong rate)
|
|
{
|
|
ulong clkin = ast2500_get_clkin(scu);
|
|
u32 mpll_reg;
|
|
struct ast2500_div_config div_cfg = {
|
|
.num = (SCU_MPLL_NUM_MASK >> SCU_MPLL_NUM_SHIFT),
|
|
.denum = (SCU_MPLL_DENUM_MASK >> SCU_MPLL_DENUM_SHIFT),
|
|
.post_div = (SCU_MPLL_POST_MASK >> SCU_MPLL_POST_SHIFT),
|
|
};
|
|
|
|
ast2500_calc_clock_config(clkin, rate, &div_cfg);
|
|
|
|
mpll_reg = readl(&scu->m_pll_param);
|
|
mpll_reg &= ~(SCU_MPLL_POST_MASK | SCU_MPLL_NUM_MASK
|
|
| SCU_MPLL_DENUM_MASK);
|
|
mpll_reg |= (div_cfg.post_div << SCU_MPLL_POST_SHIFT)
|
|
| (div_cfg.num << SCU_MPLL_NUM_SHIFT)
|
|
| (div_cfg.denum << SCU_MPLL_DENUM_SHIFT);
|
|
|
|
ast_scu_unlock(scu);
|
|
writel(mpll_reg, &scu->m_pll_param);
|
|
ast_scu_lock(scu);
|
|
|
|
return ast2500_get_mpll_rate(clkin, mpll_reg);
|
|
}
|
|
|
|
static ulong ast2500_configure_mac(struct ast2500_scu *scu, int index)
|
|
{
|
|
ulong clkin = ast2500_get_clkin(scu);
|
|
ulong hpll_rate = ast2500_get_hpll_rate(clkin,
|
|
readl(&scu->h_pll_param));
|
|
ulong required_rate;
|
|
u32 hwstrap;
|
|
u32 divisor;
|
|
u32 reset_bit;
|
|
u32 clkstop_bit;
|
|
|
|
/*
|
|
* According to data sheet, for 10/100 mode the MAC clock frequency
|
|
* should be at least 25MHz and for 1000 mode at least 100MHz
|
|
*/
|
|
hwstrap = readl(&scu->hwstrap);
|
|
if (hwstrap & (SCU_HWSTRAP_MAC1_RGMII | SCU_HWSTRAP_MAC2_RGMII))
|
|
required_rate = 100 * 1000 * 1000;
|
|
else
|
|
required_rate = 25 * 1000 * 1000;
|
|
|
|
divisor = hpll_rate / required_rate;
|
|
|
|
if (divisor < 4) {
|
|
/* Clock can't run fast enough, but let's try anyway */
|
|
debug("MAC clock too slow\n");
|
|
divisor = 4;
|
|
} else if (divisor > 16) {
|
|
/* Can't slow down the clock enough, but let's try anyway */
|
|
debug("MAC clock too fast\n");
|
|
divisor = 16;
|
|
}
|
|
|
|
switch (index) {
|
|
case 1:
|
|
reset_bit = SCU_SYSRESET_MAC1;
|
|
clkstop_bit = SCU_CLKSTOP_MAC1;
|
|
break;
|
|
case 2:
|
|
reset_bit = SCU_SYSRESET_MAC2;
|
|
clkstop_bit = SCU_CLKSTOP_MAC2;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ast_scu_unlock(scu);
|
|
clrsetbits_le32(&scu->clk_sel1, SCU_MACCLK_MASK,
|
|
((divisor - 2) / 2) << SCU_MACCLK_SHIFT);
|
|
|
|
/*
|
|
* Disable MAC, start its clock and re-enable it.
|
|
* The procedure and the delays (100us & 10ms) are
|
|
* specified in the datasheet.
|
|
*/
|
|
setbits_le32(&scu->sysreset_ctrl1, reset_bit);
|
|
udelay(100);
|
|
clrbits_le32(&scu->clk_stop_ctrl1, clkstop_bit);
|
|
mdelay(10);
|
|
clrbits_le32(&scu->sysreset_ctrl1, reset_bit);
|
|
|
|
writel((RGMII2_TXCK_DUTY << SCU_CLKDUTY_RGMII2TXCK_SHIFT)
|
|
| (RGMII1_TXCK_DUTY << SCU_CLKDUTY_RGMII1TXCK_SHIFT),
|
|
&scu->clk_duty_sel);
|
|
|
|
ast_scu_lock(scu);
|
|
|
|
return required_rate;
|
|
}
|
|
|
|
static ulong ast2500_configure_d2pll(struct ast2500_scu *scu, ulong rate)
|
|
{
|
|
/*
|
|
* The values and the meaning of the next three
|
|
* parameters are undocumented. Taken from Aspeed SDK.
|
|
*
|
|
* TODO(clg@kaod.org): the SIP and SIC values depend on the
|
|
* Numerator value
|
|
*/
|
|
const u32 d2_pll_ext_param = 0x2c;
|
|
const u32 d2_pll_sip = 0x11;
|
|
const u32 d2_pll_sic = 0x18;
|
|
u32 clk_delay_settings =
|
|
(RMII_RXCLK_IDLY << SCU_MICDS_MAC1RMII_RDLY_SHIFT)
|
|
| (RMII_RXCLK_IDLY << SCU_MICDS_MAC2RMII_RDLY_SHIFT)
|
|
| (RGMII_TXCLK_ODLY << SCU_MICDS_MAC1RGMII_TXDLY_SHIFT)
|
|
| (RGMII_TXCLK_ODLY << SCU_MICDS_MAC2RGMII_TXDLY_SHIFT);
|
|
struct ast2500_div_config div_cfg = {
|
|
.num = SCU_D2PLL_NUM_MASK >> SCU_D2PLL_NUM_SHIFT,
|
|
.denum = SCU_D2PLL_DENUM_MASK >> SCU_D2PLL_DENUM_SHIFT,
|
|
.post_div = SCU_D2PLL_POST_MASK >> SCU_D2PLL_POST_SHIFT,
|
|
};
|
|
ulong clkin = ast2500_get_clkin(scu);
|
|
ulong new_rate;
|
|
|
|
ast_scu_unlock(scu);
|
|
writel((d2_pll_ext_param << SCU_D2PLL_EXT1_PARAM_SHIFT)
|
|
| SCU_D2PLL_EXT1_OFF
|
|
| SCU_D2PLL_EXT1_RESET, &scu->d2_pll_ext_param[0]);
|
|
|
|
/*
|
|
* Select USB2.0 port1 PHY clock as a clock source for GCRT.
|
|
* This would disconnect it from D2-PLL.
|
|
*/
|
|
clrsetbits_le32(&scu->misc_ctrl1, SCU_MISC_D2PLL_OFF,
|
|
SCU_MISC_GCRT_USB20CLK);
|
|
|
|
new_rate = ast2500_calc_clock_config(clkin, rate, &div_cfg);
|
|
writel((d2_pll_sip << SCU_D2PLL_SIP_SHIFT)
|
|
| (d2_pll_sic << SCU_D2PLL_SIC_SHIFT)
|
|
| (div_cfg.num << SCU_D2PLL_NUM_SHIFT)
|
|
| (div_cfg.denum << SCU_D2PLL_DENUM_SHIFT)
|
|
| (div_cfg.post_div << SCU_D2PLL_POST_SHIFT),
|
|
&scu->d2_pll_param);
|
|
|
|
clrbits_le32(&scu->d2_pll_ext_param[0],
|
|
SCU_D2PLL_EXT1_OFF | SCU_D2PLL_EXT1_RESET);
|
|
|
|
clrsetbits_le32(&scu->misc_ctrl2,
|
|
SCU_MISC2_RGMII_HPLL | SCU_MISC2_RMII_MPLL
|
|
| SCU_MISC2_RGMII_CLKDIV_MASK |
|
|
SCU_MISC2_RMII_CLKDIV_MASK,
|
|
(4 << SCU_MISC2_RMII_CLKDIV_SHIFT));
|
|
|
|
writel(clk_delay_settings | SCU_MICDS_RGMIIPLL, &scu->mac_clk_delay);
|
|
writel(clk_delay_settings, &scu->mac_clk_delay_100M);
|
|
writel(clk_delay_settings, &scu->mac_clk_delay_10M);
|
|
|
|
ast_scu_lock(scu);
|
|
|
|
return new_rate;
|
|
}
|
|
|
|
#define SCU_CLKSTOP_SDIO 27
|
|
static ulong ast2500_enable_sdclk(struct ast2500_scu *scu)
|
|
{
|
|
u32 reset_bit;
|
|
u32 clkstop_bit;
|
|
|
|
reset_bit = BIT(ASPEED_RESET_SDIO);
|
|
clkstop_bit = BIT(SCU_CLKSTOP_SDIO);
|
|
|
|
setbits_le32(&scu->sysreset_ctrl1, reset_bit);
|
|
udelay(100);
|
|
//enable clk
|
|
clrbits_le32(&scu->clk_stop_ctrl1, clkstop_bit);
|
|
mdelay(10);
|
|
clrbits_le32(&scu->sysreset_ctrl1, reset_bit);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ulong ast2500_clk_set_rate(struct clk *clk, ulong rate)
|
|
{
|
|
struct ast2500_clk_priv *priv = dev_get_priv(clk->dev);
|
|
|
|
ulong new_rate;
|
|
switch (clk->id) {
|
|
case ASPEED_CLK_MPLL:
|
|
new_rate = ast2500_configure_ddr(priv->scu, rate);
|
|
break;
|
|
case ASPEED_CLK_D2PLL:
|
|
new_rate = ast2500_configure_d2pll(priv->scu, rate);
|
|
break;
|
|
default:
|
|
debug("%s: unknown clk %ld\n", __func__, clk->id);
|
|
return -ENOENT;
|
|
}
|
|
|
|
return new_rate;
|
|
}
|
|
|
|
static int ast2500_clk_enable(struct clk *clk)
|
|
{
|
|
struct ast2500_clk_priv *priv = dev_get_priv(clk->dev);
|
|
|
|
switch (clk->id) {
|
|
case ASPEED_CLK_SDIO:
|
|
if (readl(&priv->scu->clk_stop_ctrl1) & SCU_CLKSTOP_SDCLK) {
|
|
ast_scu_unlock(priv->scu);
|
|
|
|
setbits_le32(&priv->scu->sysreset_ctrl1,
|
|
SCU_SYSRESET_SDIO);
|
|
udelay(100);
|
|
clrbits_le32(&priv->scu->clk_stop_ctrl1,
|
|
SCU_CLKSTOP_SDCLK);
|
|
mdelay(10);
|
|
clrbits_le32(&priv->scu->sysreset_ctrl1,
|
|
SCU_SYSRESET_SDIO);
|
|
|
|
ast_scu_lock(priv->scu);
|
|
}
|
|
break;
|
|
/*
|
|
* For MAC clocks the clock rate is
|
|
* configured based on whether RGMII or RMII mode has been selected
|
|
* through hardware strapping.
|
|
*/
|
|
case ASPEED_CLK_GATE_MAC1CLK:
|
|
ast2500_configure_mac(priv->scu, 1);
|
|
break;
|
|
case ASPEED_CLK_GATE_MAC2CLK:
|
|
ast2500_configure_mac(priv->scu, 2);
|
|
break;
|
|
case ASPEED_CLK_D2PLL:
|
|
ast2500_configure_d2pll(priv->scu, D2PLL_DEFAULT_RATE);
|
|
break;
|
|
case ASPEED_CLK_GATE_SDCLK:
|
|
ast2500_enable_sdclk(priv->scu);
|
|
break;
|
|
default:
|
|
debug("%s: unknown clk %ld\n", __func__, clk->id);
|
|
return -ENOENT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct clk_ops ast2500_clk_ops = {
|
|
.get_rate = ast2500_clk_get_rate,
|
|
.set_rate = ast2500_clk_set_rate,
|
|
.enable = ast2500_clk_enable,
|
|
};
|
|
|
|
static int ast2500_clk_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct ast2500_clk_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->scu = devfdt_get_addr_ptr(dev);
|
|
if (IS_ERR(priv->scu))
|
|
return PTR_ERR(priv->scu);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast2500_clk_bind(struct udevice *dev)
|
|
{
|
|
int ret;
|
|
|
|
/* The reset driver does not have a device node, so bind it here */
|
|
ret = device_bind_driver(gd->dm_root, "ast_sysreset", "reset", &dev);
|
|
if (ret)
|
|
debug("Warning: No reset driver: ret=%d\n", ret);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id ast2500_clk_ids[] = {
|
|
{ .compatible = "aspeed,ast2500-scu" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(aspeed_ast2500_scu) = {
|
|
.name = "aspeed_ast2500_scu",
|
|
.id = UCLASS_CLK,
|
|
.of_match = ast2500_clk_ids,
|
|
.priv_auto = sizeof(struct ast2500_clk_priv),
|
|
.ops = &ast2500_clk_ops,
|
|
.bind = ast2500_clk_bind,
|
|
.of_to_plat = ast2500_clk_of_to_plat,
|
|
};
|