mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 02:33:07 +00:00
e8cd1f60d9
1. Implement bootaux for the M4 boot on i.MX8QM and QXP. Users need to download M4 image to any DDR address first. Then use the "bootaux <M4 download DDR address> [M4 core id]" to boot CM4_0 or CM4_1, the default core id is 0 for CM4_0. Since current M4 only supports running in TCM. The bootaux will copy the M4 image from DDR to its TCML. 2. Implment bootaux for HIFI on QXP command: bootaux 0x81000000 1 Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
850 lines
18 KiB
C
850 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2018, 2021 NXP
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <cpu.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <event.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/global_data.h>
|
|
#include <dm/device-internal.h>
|
|
#include <dm/lists.h>
|
|
#include <dm/uclass.h>
|
|
#include <errno.h>
|
|
#include <spl.h>
|
|
#include <thermal.h>
|
|
#include <firmware/imx/sci/sci.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch-imx/cpu.h>
|
|
#include <asm/armv8/cpu.h>
|
|
#include <asm/armv8/mmu.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/mach-imx/boot_mode.h>
|
|
#include <power-domain.h>
|
|
#include <elf.h>
|
|
#include <spl.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define BT_PASSOVER_TAG 0x504F
|
|
struct pass_over_info_t *get_pass_over_info(void)
|
|
{
|
|
struct pass_over_info_t *p =
|
|
(struct pass_over_info_t *)PASS_OVER_INFO_ADDR;
|
|
|
|
if (p->barker != BT_PASSOVER_TAG ||
|
|
p->len != sizeof(struct pass_over_info_t))
|
|
return NULL;
|
|
|
|
return p;
|
|
}
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RECOVER_DATA_SECTION)
|
|
spl_save_restore_data();
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
struct pass_over_info_t *pass_over;
|
|
|
|
if (is_soc_rev(CHIP_REV_A)) {
|
|
pass_over = get_pass_over_info();
|
|
if (pass_over && pass_over->g_ap_mu == 0) {
|
|
/*
|
|
* When ap_mu is 0, means the U-Boot booted
|
|
* from first container
|
|
*/
|
|
sc_misc_boot_status(-1, SC_MISC_BOOT_STATUS_SUCCESS);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx8_init_mu(void *ctx, struct event *event)
|
|
{
|
|
struct udevice *devp;
|
|
int node, ret;
|
|
|
|
node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "fsl,imx8-mu");
|
|
|
|
ret = uclass_get_device_by_of_offset(UCLASS_MISC, node, &devp);
|
|
if (ret) {
|
|
printf("could not get scu %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (is_imx8qm()) {
|
|
ret = sc_pm_set_resource_power_mode(-1, SC_R_SMMU,
|
|
SC_PM_PW_MODE_ON);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EVENT_SPY(EVT_DM_POST_INIT_F, imx8_init_mu);
|
|
|
|
#if defined(CONFIG_ARCH_MISC_INIT)
|
|
int arch_misc_init(void)
|
|
{
|
|
if (IS_ENABLED(CONFIG_FSL_CAAM)) {
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
|
|
if (ret)
|
|
printf("Failed to initialize caam_jr: %d\n", ret);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_IMX_BOOTAUX
|
|
|
|
#ifdef CONFIG_IMX8QM
|
|
int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data)
|
|
{
|
|
sc_rsrc_t core_rsrc, mu_rsrc;
|
|
sc_faddr_t tcml_addr;
|
|
u32 tcml_size = SZ_128K;
|
|
ulong addr;
|
|
|
|
switch (core_id) {
|
|
case 0:
|
|
core_rsrc = SC_R_M4_0_PID0;
|
|
tcml_addr = 0x34FE0000;
|
|
mu_rsrc = SC_R_M4_0_MU_1A;
|
|
break;
|
|
case 1:
|
|
core_rsrc = SC_R_M4_1_PID0;
|
|
tcml_addr = 0x38FE0000;
|
|
mu_rsrc = SC_R_M4_1_MU_1A;
|
|
break;
|
|
default:
|
|
printf("Not support this core boot up, ID:%u\n", core_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
addr = (sc_faddr_t)boot_private_data;
|
|
|
|
if (addr >= tcml_addr && addr <= tcml_addr + tcml_size) {
|
|
printf("Wrong image address 0x%lx, should not in TCML\n",
|
|
addr);
|
|
return -EINVAL;
|
|
}
|
|
|
|
printf("Power on M4 and MU\n");
|
|
|
|
if (sc_pm_set_resource_power_mode(-1, core_rsrc, SC_PM_PW_MODE_ON) != SC_ERR_NONE)
|
|
return -EIO;
|
|
|
|
if (sc_pm_set_resource_power_mode(-1, mu_rsrc, SC_PM_PW_MODE_ON) != SC_ERR_NONE)
|
|
return -EIO;
|
|
|
|
printf("Copy M4 image from 0x%lx to TCML 0x%lx\n", addr, (ulong)tcml_addr);
|
|
|
|
if (addr != tcml_addr)
|
|
memcpy((void *)tcml_addr, (void *)addr, tcml_size);
|
|
|
|
printf("Start M4 %u\n", core_id);
|
|
if (sc_pm_cpu_start(-1, core_rsrc, true, tcml_addr) != SC_ERR_NONE)
|
|
return -EIO;
|
|
|
|
printf("bootaux complete\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_IMX8QXP
|
|
int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data)
|
|
{
|
|
sc_rsrc_t core_rsrc, mu_rsrc = SC_R_NONE;
|
|
sc_faddr_t aux_core_ram;
|
|
u32 size;
|
|
ulong addr;
|
|
|
|
switch (core_id) {
|
|
case 0:
|
|
core_rsrc = SC_R_M4_0_PID0;
|
|
aux_core_ram = 0x34FE0000;
|
|
mu_rsrc = SC_R_M4_0_MU_1A;
|
|
size = SZ_128K;
|
|
break;
|
|
case 1:
|
|
core_rsrc = SC_R_DSP;
|
|
aux_core_ram = 0x596f8000;
|
|
size = SZ_2K;
|
|
break;
|
|
default:
|
|
printf("Not support this core boot up, ID:%u\n", core_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
addr = (sc_faddr_t)boot_private_data;
|
|
|
|
if (addr >= aux_core_ram && addr <= aux_core_ram + size) {
|
|
printf("Wrong image address 0x%lx, should not in aux core ram\n",
|
|
addr);
|
|
return -EINVAL;
|
|
}
|
|
|
|
printf("Power on aux core %d\n", core_id);
|
|
|
|
if (sc_pm_set_resource_power_mode(-1, core_rsrc, SC_PM_PW_MODE_ON) != SC_ERR_NONE)
|
|
return -EIO;
|
|
|
|
if (mu_rsrc != SC_R_NONE) {
|
|
if (sc_pm_set_resource_power_mode(-1, mu_rsrc, SC_PM_PW_MODE_ON) != SC_ERR_NONE)
|
|
return -EIO;
|
|
}
|
|
|
|
if (core_id == 1) {
|
|
struct power_domain pd;
|
|
|
|
if (sc_pm_clock_enable(-1, core_rsrc, SC_PM_CLK_PER, true, false) != SC_ERR_NONE) {
|
|
printf("Error enable clock\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (!power_domain_lookup_name("audio_sai0", &pd)) {
|
|
if (power_domain_on(&pd)) {
|
|
printf("Error power on SAI0\n");
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
if (!power_domain_lookup_name("audio_ocram", &pd)) {
|
|
if (power_domain_on(&pd)) {
|
|
printf("Error power on HIFI RAM\n");
|
|
return -EIO;
|
|
}
|
|
}
|
|
}
|
|
|
|
printf("Copy image from 0x%lx to 0x%lx\n", addr, (ulong)aux_core_ram);
|
|
if (core_id == 0) {
|
|
/* M4 use bin file */
|
|
memcpy((void *)aux_core_ram, (void *)addr, size);
|
|
} else {
|
|
/* HIFI use elf file */
|
|
if (!valid_elf_image(addr))
|
|
return -1;
|
|
addr = load_elf_image_shdr(addr);
|
|
}
|
|
|
|
printf("Start %s\n", core_id == 0 ? "M4" : "HIFI");
|
|
|
|
if (sc_pm_cpu_start(-1, core_rsrc, true, aux_core_ram) != SC_ERR_NONE)
|
|
return -EIO;
|
|
|
|
printf("bootaux complete\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int arch_auxiliary_core_check_up(u32 core_id)
|
|
{
|
|
sc_rsrc_t core_rsrc;
|
|
sc_pm_power_mode_t power_mode;
|
|
|
|
switch (core_id) {
|
|
case 0:
|
|
core_rsrc = SC_R_M4_0_PID0;
|
|
break;
|
|
#ifdef CONFIG_IMX8QM
|
|
case 1:
|
|
core_rsrc = SC_R_M4_1_PID0;
|
|
break;
|
|
#endif
|
|
default:
|
|
printf("Not support this core, ID:%u\n", core_id);
|
|
return 0;
|
|
}
|
|
|
|
if (sc_pm_get_resource_power_mode(-1, core_rsrc, &power_mode) != SC_ERR_NONE)
|
|
return 0;
|
|
|
|
if (power_mode != SC_PM_PW_MODE_OFF)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int print_bootinfo(void)
|
|
{
|
|
enum boot_device bt_dev = get_boot_device();
|
|
|
|
puts("Boot: ");
|
|
switch (bt_dev) {
|
|
case SD1_BOOT:
|
|
puts("SD0\n");
|
|
break;
|
|
case SD2_BOOT:
|
|
puts("SD1\n");
|
|
break;
|
|
case SD3_BOOT:
|
|
puts("SD2\n");
|
|
break;
|
|
case MMC1_BOOT:
|
|
puts("MMC0\n");
|
|
break;
|
|
case MMC2_BOOT:
|
|
puts("MMC1\n");
|
|
break;
|
|
case MMC3_BOOT:
|
|
puts("MMC2\n");
|
|
break;
|
|
case FLEXSPI_BOOT:
|
|
puts("FLEXSPI\n");
|
|
break;
|
|
case SATA_BOOT:
|
|
puts("SATA\n");
|
|
break;
|
|
case NAND_BOOT:
|
|
puts("NAND\n");
|
|
break;
|
|
case USB_BOOT:
|
|
puts("USB\n");
|
|
break;
|
|
default:
|
|
printf("Unknown device %u\n", bt_dev);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
enum boot_device get_boot_device(void)
|
|
{
|
|
enum boot_device boot_dev = SD1_BOOT;
|
|
|
|
sc_rsrc_t dev_rsrc;
|
|
|
|
sc_misc_get_boot_dev(-1, &dev_rsrc);
|
|
|
|
switch (dev_rsrc) {
|
|
case SC_R_SDHC_0:
|
|
boot_dev = MMC1_BOOT;
|
|
break;
|
|
case SC_R_SDHC_1:
|
|
boot_dev = SD2_BOOT;
|
|
break;
|
|
case SC_R_SDHC_2:
|
|
boot_dev = SD3_BOOT;
|
|
break;
|
|
case SC_R_NAND:
|
|
boot_dev = NAND_BOOT;
|
|
break;
|
|
case SC_R_FSPI_0:
|
|
boot_dev = FLEXSPI_BOOT;
|
|
break;
|
|
case SC_R_SATA_0:
|
|
boot_dev = SATA_BOOT;
|
|
break;
|
|
case SC_R_USB_0:
|
|
case SC_R_USB_1:
|
|
case SC_R_USB_2:
|
|
boot_dev = USB_BOOT;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return boot_dev;
|
|
}
|
|
|
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
#define FUSE_UNIQUE_ID_WORD0 16
|
|
#define FUSE_UNIQUE_ID_WORD1 17
|
|
void get_board_serial(struct tag_serialnr *serialnr)
|
|
{
|
|
int err;
|
|
u32 val1 = 0, val2 = 0;
|
|
u32 word1, word2;
|
|
|
|
if (!serialnr)
|
|
return;
|
|
|
|
word1 = FUSE_UNIQUE_ID_WORD0;
|
|
word2 = FUSE_UNIQUE_ID_WORD1;
|
|
|
|
err = sc_misc_otp_fuse_read(-1, word1, &val1);
|
|
if (err) {
|
|
printf("%s fuse %d read error: %d\n", __func__, word1, err);
|
|
return;
|
|
}
|
|
|
|
err = sc_misc_otp_fuse_read(-1, word2, &val2);
|
|
if (err) {
|
|
printf("%s fuse %d read error: %d\n", __func__, word2, err);
|
|
return;
|
|
}
|
|
serialnr->low = val1;
|
|
serialnr->high = val2;
|
|
}
|
|
#endif /*CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG*/
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_MMC
|
|
__weak int board_mmc_get_env_dev(int devno)
|
|
{
|
|
return CONFIG_SYS_MMC_ENV_DEV;
|
|
}
|
|
|
|
int mmc_get_env_dev(void)
|
|
{
|
|
sc_rsrc_t dev_rsrc;
|
|
int devno;
|
|
|
|
sc_misc_get_boot_dev(-1, &dev_rsrc);
|
|
|
|
switch (dev_rsrc) {
|
|
case SC_R_SDHC_0:
|
|
devno = 0;
|
|
break;
|
|
case SC_R_SDHC_1:
|
|
devno = 1;
|
|
break;
|
|
case SC_R_SDHC_2:
|
|
devno = 2;
|
|
break;
|
|
default:
|
|
/* If not boot from sd/mmc, use default value */
|
|
return CONFIG_SYS_MMC_ENV_DEV;
|
|
}
|
|
|
|
return board_mmc_get_env_dev(devno);
|
|
}
|
|
#endif
|
|
|
|
#define MEMSTART_ALIGNMENT SZ_2M /* Align the memory start with 2MB */
|
|
|
|
static int get_owned_memreg(sc_rm_mr_t mr, sc_faddr_t *addr_start,
|
|
sc_faddr_t *addr_end)
|
|
{
|
|
sc_faddr_t start, end;
|
|
int ret;
|
|
bool owned;
|
|
|
|
owned = sc_rm_is_memreg_owned(-1, mr);
|
|
if (owned) {
|
|
ret = sc_rm_get_memreg_info(-1, mr, &start, &end);
|
|
if (ret) {
|
|
printf("Memreg get info failed, %d\n", ret);
|
|
return -EINVAL;
|
|
}
|
|
debug("0x%llx -- 0x%llx\n", start, end);
|
|
*addr_start = start;
|
|
*addr_end = end;
|
|
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
__weak void board_mem_get_layout(u64 *phys_sdram_1_start,
|
|
u64 *phys_sdram_1_size,
|
|
u64 *phys_sdram_2_start,
|
|
u64 *phys_sdram_2_size)
|
|
{
|
|
*phys_sdram_1_start = PHYS_SDRAM_1;
|
|
*phys_sdram_1_size = PHYS_SDRAM_1_SIZE;
|
|
*phys_sdram_2_start = PHYS_SDRAM_2;
|
|
*phys_sdram_2_size = PHYS_SDRAM_2_SIZE;
|
|
}
|
|
|
|
phys_size_t get_effective_memsize(void)
|
|
{
|
|
sc_rm_mr_t mr;
|
|
sc_faddr_t start, end, end1, start_aligned;
|
|
u64 phys_sdram_1_start, phys_sdram_1_size;
|
|
u64 phys_sdram_2_start, phys_sdram_2_size;
|
|
int err;
|
|
|
|
board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size,
|
|
&phys_sdram_2_start, &phys_sdram_2_size);
|
|
|
|
|
|
end1 = (sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size;
|
|
for (mr = 0; mr < 64; mr++) {
|
|
err = get_owned_memreg(mr, &start, &end);
|
|
if (!err) {
|
|
start_aligned = roundup(start, MEMSTART_ALIGNMENT);
|
|
/* Too small memory region, not use it */
|
|
if (start_aligned > end)
|
|
continue;
|
|
|
|
/* Find the memory region runs the U-Boot */
|
|
if (start >= phys_sdram_1_start && start <= end1 &&
|
|
(start <= CONFIG_TEXT_BASE &&
|
|
end >= CONFIG_TEXT_BASE)) {
|
|
if ((end + 1) <=
|
|
((sc_faddr_t)phys_sdram_1_start +
|
|
phys_sdram_1_size))
|
|
return (end - phys_sdram_1_start + 1);
|
|
else
|
|
return phys_sdram_1_size;
|
|
}
|
|
}
|
|
}
|
|
|
|
return phys_sdram_1_size;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
sc_rm_mr_t mr;
|
|
sc_faddr_t start, end, end1, end2;
|
|
u64 phys_sdram_1_start, phys_sdram_1_size;
|
|
u64 phys_sdram_2_start, phys_sdram_2_size;
|
|
int err;
|
|
|
|
board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size,
|
|
&phys_sdram_2_start, &phys_sdram_2_size);
|
|
|
|
end1 = (sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size;
|
|
end2 = (sc_faddr_t)phys_sdram_2_start + phys_sdram_2_size;
|
|
for (mr = 0; mr < 64; mr++) {
|
|
err = get_owned_memreg(mr, &start, &end);
|
|
if (!err) {
|
|
start = roundup(start, MEMSTART_ALIGNMENT);
|
|
/* Too small memory region, not use it */
|
|
if (start > end)
|
|
continue;
|
|
|
|
if (start >= phys_sdram_1_start && start <= end1) {
|
|
if ((end + 1) <= end1)
|
|
gd->ram_size += end - start + 1;
|
|
else
|
|
gd->ram_size += end1 - start;
|
|
} else if (start >= phys_sdram_2_start &&
|
|
start <= end2) {
|
|
if ((end + 1) <= end2)
|
|
gd->ram_size += end - start + 1;
|
|
else
|
|
gd->ram_size += end2 - start;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* If error, set to the default value */
|
|
if (!gd->ram_size) {
|
|
gd->ram_size = phys_sdram_1_size;
|
|
gd->ram_size += phys_sdram_2_size;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void dram_bank_sort(int current_bank)
|
|
{
|
|
phys_addr_t start;
|
|
phys_size_t size;
|
|
|
|
while (current_bank > 0) {
|
|
if (gd->bd->bi_dram[current_bank - 1].start >
|
|
gd->bd->bi_dram[current_bank].start) {
|
|
start = gd->bd->bi_dram[current_bank - 1].start;
|
|
size = gd->bd->bi_dram[current_bank - 1].size;
|
|
|
|
gd->bd->bi_dram[current_bank - 1].start =
|
|
gd->bd->bi_dram[current_bank].start;
|
|
gd->bd->bi_dram[current_bank - 1].size =
|
|
gd->bd->bi_dram[current_bank].size;
|
|
|
|
gd->bd->bi_dram[current_bank].start = start;
|
|
gd->bd->bi_dram[current_bank].size = size;
|
|
}
|
|
current_bank--;
|
|
}
|
|
}
|
|
|
|
int dram_init_banksize(void)
|
|
{
|
|
sc_rm_mr_t mr;
|
|
sc_faddr_t start, end, end1, end2;
|
|
int i = 0;
|
|
u64 phys_sdram_1_start, phys_sdram_1_size;
|
|
u64 phys_sdram_2_start, phys_sdram_2_size;
|
|
int err;
|
|
|
|
board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size,
|
|
&phys_sdram_2_start, &phys_sdram_2_size);
|
|
|
|
end1 = (sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size;
|
|
end2 = (sc_faddr_t)phys_sdram_2_start + phys_sdram_2_size;
|
|
for (mr = 0; mr < 64 && i < CONFIG_NR_DRAM_BANKS; mr++) {
|
|
err = get_owned_memreg(mr, &start, &end);
|
|
if (!err) {
|
|
start = roundup(start, MEMSTART_ALIGNMENT);
|
|
if (start > end) /* Small memory region, no use it */
|
|
continue;
|
|
|
|
if (start >= phys_sdram_1_start && start <= end1) {
|
|
gd->bd->bi_dram[i].start = start;
|
|
|
|
if ((end + 1) <= end1)
|
|
gd->bd->bi_dram[i].size =
|
|
end - start + 1;
|
|
else
|
|
gd->bd->bi_dram[i].size = end1 - start;
|
|
|
|
dram_bank_sort(i);
|
|
i++;
|
|
} else if (start >= phys_sdram_2_start && start <= end2) {
|
|
gd->bd->bi_dram[i].start = start;
|
|
|
|
if ((end + 1) <= end2)
|
|
gd->bd->bi_dram[i].size =
|
|
end - start + 1;
|
|
else
|
|
gd->bd->bi_dram[i].size = end2 - start;
|
|
|
|
dram_bank_sort(i);
|
|
i++;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* If error, set to the default value */
|
|
if (!i) {
|
|
gd->bd->bi_dram[0].start = phys_sdram_1_start;
|
|
gd->bd->bi_dram[0].size = phys_sdram_1_size;
|
|
gd->bd->bi_dram[1].start = phys_sdram_2_start;
|
|
gd->bd->bi_dram[1].size = phys_sdram_2_size;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u64 get_block_attrs(sc_faddr_t addr_start)
|
|
{
|
|
u64 attr = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN;
|
|
u64 phys_sdram_1_start, phys_sdram_1_size;
|
|
u64 phys_sdram_2_start, phys_sdram_2_size;
|
|
|
|
board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size,
|
|
&phys_sdram_2_start, &phys_sdram_2_size);
|
|
|
|
if ((addr_start >= phys_sdram_1_start &&
|
|
addr_start <= ((sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size)) ||
|
|
(addr_start >= phys_sdram_2_start &&
|
|
addr_start <= ((sc_faddr_t)phys_sdram_2_start + phys_sdram_2_size)))
|
|
return (PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE);
|
|
|
|
return attr;
|
|
}
|
|
|
|
static u64 get_block_size(sc_faddr_t addr_start, sc_faddr_t addr_end)
|
|
{
|
|
sc_faddr_t end1, end2;
|
|
u64 phys_sdram_1_start, phys_sdram_1_size;
|
|
u64 phys_sdram_2_start, phys_sdram_2_size;
|
|
|
|
board_mem_get_layout(&phys_sdram_1_start, &phys_sdram_1_size,
|
|
&phys_sdram_2_start, &phys_sdram_2_size);
|
|
|
|
|
|
end1 = (sc_faddr_t)phys_sdram_1_start + phys_sdram_1_size;
|
|
end2 = (sc_faddr_t)phys_sdram_2_start + phys_sdram_2_size;
|
|
|
|
if (addr_start >= phys_sdram_1_start && addr_start <= end1) {
|
|
if ((addr_end + 1) > end1)
|
|
return end1 - addr_start;
|
|
} else if (addr_start >= phys_sdram_2_start && addr_start <= end2) {
|
|
if ((addr_end + 1) > end2)
|
|
return end2 - addr_start;
|
|
}
|
|
|
|
return (addr_end - addr_start + 1);
|
|
}
|
|
|
|
#define MAX_PTE_ENTRIES 512
|
|
#define MAX_MEM_MAP_REGIONS 16
|
|
|
|
static struct mm_region imx8_mem_map[MAX_MEM_MAP_REGIONS];
|
|
struct mm_region *mem_map = imx8_mem_map;
|
|
|
|
void enable_caches(void)
|
|
{
|
|
sc_rm_mr_t mr;
|
|
sc_faddr_t start, end;
|
|
int err, i;
|
|
|
|
/* Create map for registers access from 0x1c000000 to 0x80000000*/
|
|
imx8_mem_map[0].virt = 0x1c000000UL;
|
|
imx8_mem_map[0].phys = 0x1c000000UL;
|
|
imx8_mem_map[0].size = 0x64000000UL;
|
|
imx8_mem_map[0].attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
|
|
|
|
i = 1;
|
|
for (mr = 0; mr < 64 && i < MAX_MEM_MAP_REGIONS; mr++) {
|
|
err = get_owned_memreg(mr, &start, &end);
|
|
if (!err) {
|
|
imx8_mem_map[i].virt = start;
|
|
imx8_mem_map[i].phys = start;
|
|
imx8_mem_map[i].size = get_block_size(start, end);
|
|
imx8_mem_map[i].attrs = get_block_attrs(start);
|
|
i++;
|
|
}
|
|
}
|
|
|
|
if (i < MAX_MEM_MAP_REGIONS) {
|
|
imx8_mem_map[i].size = 0;
|
|
imx8_mem_map[i].attrs = 0;
|
|
} else {
|
|
puts("Error, need more MEM MAP REGIONS reserved\n");
|
|
icache_enable();
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < MAX_MEM_MAP_REGIONS; i++) {
|
|
debug("[%d] vir = 0x%llx phys = 0x%llx size = 0x%llx attrs = 0x%llx\n",
|
|
i, imx8_mem_map[i].virt, imx8_mem_map[i].phys,
|
|
imx8_mem_map[i].size, imx8_mem_map[i].attrs);
|
|
}
|
|
|
|
icache_enable();
|
|
dcache_enable();
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
|
|
u64 get_page_table_size(void)
|
|
{
|
|
u64 one_pt = MAX_PTE_ENTRIES * sizeof(u64);
|
|
u64 size = 0;
|
|
|
|
/*
|
|
* For each memory region, the max table size:
|
|
* 2 level 3 tables + 2 level 2 tables + 1 level 1 table
|
|
*/
|
|
size = (2 + 2 + 1) * one_pt * MAX_MEM_MAP_REGIONS + one_pt;
|
|
|
|
/*
|
|
* We need to duplicate our page table once to have an emergency pt to
|
|
* resort to when splitting page tables later on
|
|
*/
|
|
size *= 2;
|
|
|
|
/*
|
|
* We may need to split page tables later on if dcache settings change,
|
|
* so reserve up to 4 (random pick) page tables for that.
|
|
*/
|
|
size += one_pt * 4;
|
|
|
|
return size;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_IMX8QM)
|
|
#define FUSE_MAC0_WORD0 452
|
|
#define FUSE_MAC0_WORD1 453
|
|
#define FUSE_MAC1_WORD0 454
|
|
#define FUSE_MAC1_WORD1 455
|
|
#elif defined(CONFIG_IMX8QXP)
|
|
#define FUSE_MAC0_WORD0 708
|
|
#define FUSE_MAC0_WORD1 709
|
|
#define FUSE_MAC1_WORD0 710
|
|
#define FUSE_MAC1_WORD1 711
|
|
#endif
|
|
|
|
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
|
|
{
|
|
u32 word[2], val[2] = {};
|
|
int i, ret;
|
|
|
|
if (dev_id == 0) {
|
|
word[0] = FUSE_MAC0_WORD0;
|
|
word[1] = FUSE_MAC0_WORD1;
|
|
} else {
|
|
word[0] = FUSE_MAC1_WORD0;
|
|
word[1] = FUSE_MAC1_WORD1;
|
|
}
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
ret = sc_misc_otp_fuse_read(-1, word[i], &val[i]);
|
|
if (ret < 0)
|
|
goto err;
|
|
}
|
|
|
|
mac[0] = val[0];
|
|
mac[1] = val[0] >> 8;
|
|
mac[2] = val[0] >> 16;
|
|
mac[3] = val[0] >> 24;
|
|
mac[4] = val[1];
|
|
mac[5] = val[1] >> 8;
|
|
|
|
debug("%s: MAC%d: %02x.%02x.%02x.%02x.%02x.%02x\n",
|
|
__func__, dev_id, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
|
|
return;
|
|
err:
|
|
printf("%s: fuse %d, err: %d\n", __func__, word[i], ret);
|
|
}
|
|
|
|
u32 get_cpu_rev(void)
|
|
{
|
|
u32 id = 0, rev = 0;
|
|
int ret;
|
|
|
|
ret = sc_misc_get_control(-1, SC_R_SYSTEM, SC_C_ID, &id);
|
|
if (ret)
|
|
return 0;
|
|
|
|
rev = (id >> 5) & 0xf;
|
|
id = (id & 0x1f) + MXC_SOC_IMX8; /* Dummy ID for chip */
|
|
|
|
return (id << 12) | rev;
|
|
}
|
|
|
|
void board_boot_order(u32 *spl_boot_list)
|
|
{
|
|
spl_boot_list[0] = spl_boot_device();
|
|
|
|
if (spl_boot_list[0] == BOOT_DEVICE_SPI) {
|
|
/* Check whether we own the flexspi0, if not, use NOR boot */
|
|
if (!sc_rm_is_resource_owned(-1, SC_R_FSPI_0))
|
|
spl_boot_list[0] = BOOT_DEVICE_NOR;
|
|
}
|
|
}
|
|
|
|
bool m4_parts_booted(void)
|
|
{
|
|
sc_rm_pt_t m4_parts[2];
|
|
int err;
|
|
|
|
err = sc_rm_get_resource_owner(-1, SC_R_M4_0_PID0, &m4_parts[0]);
|
|
if (err) {
|
|
printf("%s get resource [%d] owner error: %d\n", __func__,
|
|
SC_R_M4_0_PID0, err);
|
|
return false;
|
|
}
|
|
|
|
if (sc_pm_is_partition_started(-1, m4_parts[0]))
|
|
return true;
|
|
|
|
if (is_imx8qm()) {
|
|
err = sc_rm_get_resource_owner(-1, SC_R_M4_1_PID0, &m4_parts[1]);
|
|
if (err) {
|
|
printf("%s get resource [%d] owner error: %d\n",
|
|
__func__, SC_R_M4_1_PID0, err);
|
|
return false;
|
|
}
|
|
|
|
if (sc_pm_is_partition_started(-1, m4_parts[1]))
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|