2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-26 04:53:42 +00:00
u-boot/arch/arm/dts/mt7629-rfb.dts
Weijie Gao aef54ea16c arm: dts: medaitek: convert gmac link mode to 2500base-x
Now that individual 2.5Gbps SGMII support has been added to
mtk-eth, all boards that use 2.5Gbps link with mt7531 must be
converted to use "2500base-x" instead of "sgmii".

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2023-08-03 09:40:50 -04:00

123 lines
1.7 KiB
Text

/*
* Copyright (C) 2018 MediaTek Inc.
* Author: Ryder Lee <ryder.lee@mediatek.com>
*
* SPDX-License-Identifier: (GPL-2.0 OR MIT)
*/
/dts-v1/;
#include "mt7629.dtsi"
#include "mt7629-rfb-u-boot.dtsi"
/ {
model = "MediaTek MT7629 RFB";
compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
aliases {
spi0 = &snor;
};
chosen {
stdout-path = &uart0;
};
};
&eth {
status = "okay";
mediatek,gmac-id = <0>;
phy-mode = "2500base-x";
mediatek,switch = "mt7531";
reset-gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
&pinctrl {
state_default: pinmux_conf {
bootph-all;
mux {
function = "jtag";
groups = "ephy_leds_jtag";
bootph-all;
};
};
snfi_pins: snfi-pins {
mux {
function = "flash";
groups = "snfi";
};
};
snor_pins: snor-pins {
mux {
function = "flash";
groups = "spi_nor";
};
};
uart0_pins: uart0-default {
mux {
function = "uart";
groups = "uart0_txd_rxd";
};
};
watchdog_pins: watchdog-default {
mux {
function = "watchdog";
groups = "watchdog";
};
};
};
&snfi {
pinctrl-names = "default", "snfi";
pinctrl-0 = <&snor_pins>;
pinctrl-1 = <&snfi_pins>;
status = "disabled";
spi-flash@0{
compatible = "jedec,spi-nor";
reg = <0>;
bootph-all;
};
};
&snor {
pinctrl-names = "default";
pinctrl-0 = <&snor_pins>;
status = "okay";
spi-flash@0{
compatible = "jedec,spi-nor";
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
bootph-all;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&xhci {
status = "okay";
};
&u3phy {
status = "okay";
};
&watchdog {
pinctrl-names = "default";
pinctrl-0 = <&watchdog_pins>;
status = "okay";
};